| 1. |
- Javed, Asif, 1982-, et al.
(författare)
-
Lignin-containing coatings for packaging materials—pilot trials
- 2021
-
Ingår i: Polymers. - : MDPI AG. - 2073-4360. ; 13:10
-
Tidskriftsartikel (refereegranskat)abstract
- One severe weakness of most biopolymers, in terms of their use as packaging materials, is their relatively high solubility in water. The addition of kraft lignin to starch coating formulations has been shown to reduce the water solubility of starch in dry coatings. However, lignin may also migrate into aqueous solutions. For this paper, kraft lignin isolated using the LignoBoost process was used in order to examine the effect of pH level on the solubility of lignin with and without ammonium zirconium carbonate (AZC). Machine-glazed (MG) paper was coated in a pilot coating machine, with the moving substrate at high speed, and laboratory-coated samples were used as a reference when measuring defects (number of pinholes). Kraft lignin became soluble in water at lower pH levels when starch was added to the solution, due to the interactions between starch and lignin. This made it possible to lower the pH of the coating solutions, resulting in increased water stability of the dry samples; that is, the migration of lignin to the model liquids decreased when the pH of the coating solutions was reduced. No significant difference was observed in the water vapor transmission rate (WVTR) between high and low pH for the pilot-coated samples. The addition of AZC to the formulation reduced the migration of lignin from the coatings to the model liquids and led to an increase in the water contact angle, but also increased the number of pinholes in the pilot-coated samples. © 2021 by the authors
|
|
| 2. |
- Javed, Asif, 1982-, et al.
(författare)
-
Study of starch and starch-PVOH blends and effects of plasticizers on mechanical and barrier properties of coated paperboard
- 2016
-
Ingår i: Nordic Pulp & Paper Research Journal. - : Swedish Association of Pulp and Paper Engineers. - 0283-2631 .- 2000-0669. ; 31:3, s. 499-510
-
Tidskriftsartikel (refereegranskat)abstract
- The mechanical properties of self-supporting films based on starch-plasticizer and starch-PVOH-plasticizer and the barrier properties of paperboard coated with solutions of these polymers have been studied. The plasticizers used were glycerol, polyethylene glycol and citric acid. It was shown that the addition of a plasticizer and PVOH to starch substantially increases the flexibility of starch films. It was seen that curing the self-supporting films led to a decrease in flexibility. After heat-treatment, a substantial increase in storage modulus was observed only in the starch-PVOH-citric-acid blend films. Tensile tests on the films indicate that citric acid did not cause any noticeable phase separation. Citric acid acted as a compatibilizer for starch-PVOH blends even though a similar enrichment of PVOH at the air-solid interface was observed with both citric acid and polyethylene glycol as plasticizer. The properties of barrier coatings greatly reflected the compatibility of starch-PVOH blends containing citric acid. The only plasticizer that resulted in a lower water vapour transmission rate through the starch and starch-PVOH coatings was citric acid, which suggests that cross-linking took place. With four layers, coatings based of starch-PVOH possessed the same oxygen- transmission rate with citric acid as without citric acid.
|
|
| 3. |
- Nyflött, Åsa, 1986-
(författare)
-
Structural Studies and Modelling of Oxygen Transport in Barrier Materials for Food Packaging
- 2014
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The requirements of food packages are to ensure food safety and quality, to minimize spoilage, and to provide an easy way to store and handle food. To meet these demands for fibre-based food packages, barrier coatings are generally used to regulate the amount of gases entering a package, as some gases are detrimental to food quality. Oxygen, for example, initiates lipid oxidation in fatty foods. Bakery products may also be sensitive to oxygen.This thesis focused on mass transport of oxygen in order to gain deeper knowledge in the performance of barrier coatings and to develop means to optimize the performance of barrier coatings. This experimental study along with computer modelling characterized the structure of barrier materials with respect to the mass transport process.This project was performed as part of the multidisciplinary industrial graduate school VIPP (www.kau.se/en/vipp) - Values Created in Fibre Based Processes and Products – at Karlstad University, with the financial support from the Knowledge Foundation, Sweden, and Stora Enso.
|
|
| 4. |
- Ragnarsson, Micael, 1972-, et al.
(författare)
-
Effects of the Partial Replacement of SB latex with Dextrin Starch on the Thickness Distribution of Coating Layers
- 2008
-
Ingår i: Tappi 2008 Advanced Coatings Fundementals Symposium Proceedings. - Atlanta : Tappi press. - 1595101748 ; , s. 154-163
-
Konferensbidrag (refereegranskat)abstract
- A pilot coating trial has been carried out where the synthetic binder in the coating colour was partially replaced with dextrin starch. The coating thickness and the coating thickness distribution were investigated by means of burnout tests and mercury porosity measurements. The coating thickness distribution is governed by the surface profile of the base paper underneath the blade; this surface profile is controlled by the compressibility of the base paper and the blade pressure. Dewatering of the coating colours plasticises the paper and increases its compressibility; a linear relationship between dewatering and the standard deviation in the coating thickness was found for a given blade pressure. The characterization of the coating layers showed a small but measurable increase in the thickness variation for increasing starch content, which was caused by the higher water retention of the starch colours. The surface profile of the uncoated and coated paper was investigated with an optical profilometer. The data from those measurements and the coating thickness distribution investigation were used analytically to calculate the roughness change of the base paper during coating. The roughness change was found to be inversely proportional to the original base paper roughness, indicating that the rougher base paper was more compressible.
|
|
| 5. |
|
|
| 6. |
|
|
| 7. |
|
|
| 8. |
|
|
| 9. |
|
|
| 10. |
|
|
