| 1. |
- Olson, Linus, et al.
(författare)
-
Phase-Changing Glauber Salt Solution for Medical Applications in the 28-32 degrees C Interval
- 2021
-
Ingår i: Materials. - : MDPI AG. - 1996-1944. ; 14:23
-
Tidskriftsartikel (refereegranskat)abstract
- (1) Background: The field of medicine requires simple cooling materials. However, there is little knowledge documented about phase change materials (PCM) covering the range of 28 to 40 degrees Celsius, as needed for medical use. Induced mild hypothermia, started within 6 h after birth, is an emerging therapy for reducing death and severe disabilities in asphyxiated infants. Currently, this hypothermia is accomplished with equipment that needs a power source and a liquid supply. Neonatal cooling is more frequent in low-resource settings, where ~1 million deaths are caused by birth-asphyxia. (2) Methods: A simple and safe cooling method suitable for medical application is needed for the 28 to 37.5 degrees C window. (3) Results: Using empirical experiments in which the ingredients in Glauber salt were changed, we studied the effects of temperature on material in the indicated temperature range. The examination, in a controlled manner, of different mixtures of NaCl, Na2SO4 and water resulted in a better understanding of how the different mixtures act and how to compose salt solutions that can satisfy clinical cooling specifications. (4) Conclusions: Our Glauber salt solution is a clinically suited PCM in the temperature interval needed for the cooling of infants suffering from asphyxia.
|
|
| 2. |
- Bernmark, Eva, et al.
(författare)
-
Head movements during two computer work tasks assessed by accelerometry
- 2011
-
Ingår i: Applied Ergonomics. - : Elsevier. - 0003-6870 .- 1872-9126. ; 42:2, s. 309-313
-
Tidskriftsartikel (refereegranskat)abstract
- We investigated whether potential differences in head inclinations and accelerations for two highly similar computer work tasks could be detected using (1) a triaxial accelerometer and (2) a simulated uniaxial accelerometer.Ten subjects’ head movements were registered with a triaxial accelerometer system for two similar document-management tasks at their work place: a fully electronic document-management task and one also involving paper documents.In situations where head movements were small, a triaxial accelerometer was able to discriminate between the different degrees of static work of the neck in terms of range of head inclinations and accelerations. A difference in head acceleration was also found by using a simulated uniaxial accelerometer. Thus, in terms of head movement and for work similar to this office work, potential dynamic differences in observationally similar work tasks can be investigated by using a triaxial accelerometer. For acceleration alone, a uniaxial accelerometer can also be used.
|
|
| 3. |
- Dahlgren, Gunilla, et al.
(författare)
-
Correlations between Ratings and Technical Measurements in Hand-Intensive Work
- 2023
-
Ingår i: Bioengineering. - : MDPI AG. - 2306-5354. ; 10:7
-
Tidskriftsartikel (refereegranskat)abstract
- An accurate rating of hand activity and force is essential in risk assessment and for the effective prevention of work-related musculoskeletal disorders. However, it is unclear whether the subjective ratings of workers and observers correlate to corresponding objective technical measures of exposure. Fifty-nine workers were video recorded while performing a hand-intensive work task at their workplace. Self-ratings of hand activity level (HAL) and force (Borg CR10) using the Hand Activity Threshold Limit Value(& REG;) were assessed. Four ergonomist observers, in two pairs, also rated the hand activity and force level for each worker from video recordings. Wrist angular velocity was measured using inertial movement units. Muscle activity in the forearm muscles flexor carpi radialis (FCR) and extensor carpi radialis (ECR) was measured with electromyography root mean square values (RMS) and normalized to maximal voluntary electrical activation (MVE). Kendall's tau-b correlations were statistically significant between self-rated hand activity and wrist angular velocity at the 10th, 50th, and 90th percentiles (0.26, 0.31, and 0.23) and for the ratings of observers (0.32, 0.41, and 0.34). Significant correlations for force measures were found only for observer-ratings in five of eight measures (FCR 50th percentile 0.29, time > 10%MVE 0.43, time > 30%MVE 0.44, time < 5% -0.47) and ECR (time > 30%MVE 0.26). The higher magnitude of correlation for observer-ratings suggests that they may be preferred to the self-ratings of workers. When possible, objective technical measures of wrist angular velocity and muscle activity should be preferred to subjective ratings when assessing risks of work-related musculoskeletal disorders.
|
|
| 4. |
- Dahlqvist, Camilla, et al.
(författare)
-
Comparing two methods to record maximal voluntary contractions and different electrode positions in recordings of forearm extensor muscle activity : refining risk assessments for work-related wrist disorders
- 2018
-
Ingår i: Work. - : IOS Press. - 1051-9815. ; 59:2, s. 231-242
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Wrist disorders are common in force demanding industrial repetitive work. Visual assessment of force demands have a low reliability, instead surface electromyography (EMG) may be used as part of a risk assessment for work-related wrist disorders. For normalization of EMG recordings, a power grip (hand grip) is often used as maximal voluntary contraction (MVC) of the forearm extensor muscles. However, the test-retest reproducibility is poor and EMG amplitudes exceeding 100% have occasionally been recorded during work. An alternative MVC is resisted wrist extension, which may be more reliable.Objective: To compare hand grip and resisted wrist extension MVCs, in terms of amplitude and reproducibility, and to examine the effect of electrode positioning.Methods: Twelve subjects participated. EMG from right forearm extensors, from four electrode pairs, was recorded during MVCs, on three separate occasions.Results: The group mean EMG amplitudes for resisted wrist extension were 1.2-1.7 times greater than those for hand grip. Resisted wrist extension showed better reproducibility than hand grip.Conclusions: The results indicate that the use of resisted wrist extension is a more accurate measurement of maximal effort of wrist extensor contractions than using hand grip and should increase the precision in EMG recordings from forearm extensor muscles, which in turn will increase the quality of risk assessments that are based on these.
|
|
| 5. |
- Dahlqvist, Camilla, et al.
(författare)
-
Validity of a small low-cost triaxial accelerometer with integrated logger for uncomplicated measurements of postures and movements of head, upper back and upper arms
- 2016
-
Ingår i: Applied Ergonomics. - : Elsevier. - 0003-6870 .- 1872-9126. ; 55, s. 108-116
-
Tidskriftsartikel (refereegranskat)abstract
- Repetitive work and work in constrained postures are risk factors for developing musculoskeletal disorders. Low-cost, user-friendly technical methods to quantify these risks are needed. The aims were to validate inclination angles and velocities of one model of the new generation of accelerometers with integrated data loggers against a previously validated one, and to compare meaurements when using a plain reference posture with that of a standardized one. All mean (n = 12 subjects) angular RMS-differences in 4 work tasks and 4 body parts were <2.5° and all mean median angular velocity differences <5.0 °/s. The mean correlation between the inclination signal-pairs was 0.996. This model of the new generation of triaxial accelerometers proved to be comparable to the validated accelerometer using a data logger. This makes it well-suited, for both researchers and practitioners, to measure postures and movements during work. Further work is needed for validation of the plain reference posture for upper arms.
|
|
| 6. |
- Dong, Yidan, et al.
(författare)
-
Derived patterns of musculoskeletal symptoms and their relationships with ergonomic factors among electronic assembly workers : A latent class analysis
- 2022
-
Ingår i: Journal of Safety Research. - : Elsevier BV. - 0022-4375 .- 1879-1247. ; 82, s. 293-300
-
Tidskriftsartikel (refereegranskat)abstract
- Introduction: Multi-site musculoskeletal symptoms (MSS) are considered to be more common and have more serious consequences than single-site MSS. This study aimed to determine whether derived patterns of MSS may be identified in electronic assembly workers and if extracted MSS classes are associated with personal and work-related factors. Method: A cross-sectional questionnaire study was performed with 700 participating electronic assembly workers. The questionnaire included individual factors, psychosocial and physical exposures, and MSS. The derived patterns of MSS and their relationships with ergonomic factors were analyzed using latent class analysis (LCA) and multinomial logistic regression models (MLRM). Results: The 1-year prevalence of MSS affecting only one body site or two or more body sites was 14.9% and 32.7%, respectively. The results of LCA showed three distinct classes of MSS patterns, which were labelled 'MSS in most sites' (5.0%), 'MSS in neck and shoulder' (27.0%), and 'MSS in one or no site' (68.0%). The results of MLRM showed that the 'MSS in neck and shoulder' was associated with job tenure (OR 5.579, 95% CI 2.488-12.511), excessive dynamic and static loads (OR 3.868, 95% CI 1.702- 8.793 and OR 5.270, 95% CI 2.020-13.747, respectively); while the 'MSS in most sites' was associated with high job demands (OR 4.528, 95% CI 1.647-12.445) and excessive dynamic loads (OR 111.554, 95% CI 4.996-2490.793). Conclusions: The results showed unique patterns of MSS among electronic assembly workers that were associated with personal and work-related factors. Practical applications: The findings highlight that the high prevalence of multi-site MSS in this group should be a focus. It also provides further evidence that LCA considering the number and location of anatomical sites involving MSS can be used to determine distinct classes of MSS patterns, which is of great significance for the epidemiological study and management of MSS in the future.
|
|
| 7. |
- Elcadi, Guilherme H., 1966-, et al.
(författare)
-
Shoulder and forearm oxygenation and myoelectric activity in patients with work related muscle pain and healthy subjects
- 2013
-
Ingår i: European Journal of Applied Physiology. - New York : Springer. - 1439-6319 .- 1439-6327. ; 113:5, s. 1103-1115
-
Tidskriftsartikel (refereegranskat)abstract
- We tested hypotheses of (i) reduced oxygen usage, oxygen recovery, blood flow and oxygen consumption; and (ii) increased muscle activity for patients diagnosed with work related muscle pain in comparison to healthy controls. Oxygenation was measured with near infrared spectroscopy (NIRS), and muscle activity with EMG for the extensor carpi radialis (ECR) and trapezius descendens (TD) muscles. Eighteen patients with diffuse neck-shoulder-arm pain and seventeen controls (matched in age and sex) were equipped with NIRS and EMG probes. After determining an individual’s maximum voluntary contraction (MVC) force, short term (20 sec) isometric contractions for the ECR and TD of 10%, 30%, 50% and 70% MVC generated ∆StO2% and StO2% recovery (Rslope) from NIRS, and RMS%max from EMG signals. In addition, upper arm venous (VO) and arterial (AO) occlusions generated slopes of total hemoglobin (HbTslope) and deoxyhemoglobin (HHbslope) for the resting ECR as surrogates of blood flow and oxygen consumption, respectively. Mixed Model analyses, t-tests, and Mann-Whitney test were used to assess differences between groups. There was no significant difference in MVC between groups for either muscle. Also, ∆StO2%, Rslope for either muscle, and ECR-HbTslope were not different between groups, thus our hypotheses of reduced oxygen use, recovery, and blood flow for patients were not confirmed. However, patients had a significantly lower ECR-HHbslope confirming our hypothesis of reduced consumption. Further, there was no difference in RMS%max during contractions meaning that the hypothesis of increased activity for patients was not confirmed. When taking into account the number of NIRS variables studied, differences we found between our patient group and healthy controls (i.e. in forearm oxygen consumption and shoulder oxygen saturation level) may be considered modest. Overall our findings may have been impacted by the fact that our patients and controls were similar in muscle strength, which is in contrast to previous studies.
|
|
| 8. |
- Epstein, Majken, et al.
(författare)
-
Managing Sustainable Working Hours within Participatory Working Time Scheduling for Nurses and Assistant Nurses : A Qualitative Interview Study with Managers and Staffing Assistants
- 2023
-
Ingår i: Journal of Nursing Management. - : Hindawi Publishing Corporation. - 0966-0429 .- 1365-2834. ; 2023
-
Tidskriftsartikel (refereegranskat)abstract
- Aim. To bring insights into how healthcare managers and staffing assistants work to achieve sustainable working hours within a participatory scheduling system. Background. Hospital nurses and assistant nurses often work on rotating shifts, which affects their opportunities for sleep, recovery, and work-life balance. In Sweden, a participatory scheduling approach is commonly used, where working hours are planned in collaboration between employees, managers, and staffing assistants. Influence over working hours is related to positive outcomes among shift workers. However, it also places responsibility on the employee to schedule working hours that promote health and patient safety, i.e., sustainable working hours. Accordingly, the organisation has responsibilities to support the employee in this regard. Methods. Semistructured individual interviews were conducted with 11 managers and 9 staffing assistants from four Swedish regions and analysed using thematic analysis. Results. Several key factors for achieving sustainable working hours within the context of participatory scheduling were described: distribution and clarity of responsibilities, allocating time for scheduling, establishing shared responsibility, considering fairness, fostering an individual relationship with the employee, managing dissatisfaction, providing support, clarifying guidelines for sustainable scheduling, managing inconsistencies between employee requests and sustainable working hours, and considering recovery opportunities and the competence mix on shifts. Additionally, contextual factors, such as staffing levels, working procedures, working time arrangements for night work, and technological support, were highlighted as important. Conclusion. Achieving sustainable working hours within participatory scheduling involves considering the interactions between factors at the levels of the organisation, the individual, and the technological systems. Implication for Nursing Management. Nurse managers and staffing assistants must work closely with their employees during participatory scheduling to ensure sustainable working hours. Key goals in this regard include establishing a shared responsibility, clarifying responsibilities and guidelines for sustainable scheduling, and allocating time for the scheduling process.
|
|
| 9. |
|
|
| 10. |
- Fletcher-Sandersjoo, Alexander, et al.
(författare)
-
Stockholm score of lesion detection on computed tomography following mild traumatic brain injury (SELECT-TBI) : study protocol for a multicentre, retrospective, observational cohort study
- 2022
-
Ingår i: BMJ Open. - : BMJ. - 2044-6055. ; 12:9
-
Tidskriftsartikel (refereegranskat)abstract
- Introduction Mild traumatic brain injury (mTBI) is one of the most common reasons for emergency department (ED) visits. A portion of patients with mTBI will develop an intracranial lesion that might require medical or surgical intervention. In these patients, swift diagnosis and management is paramount. Several guidelines have been developed to help direct patients with mTBI for head CT scanning, but they lack specificity, do not consider the interactions between risk factors and do not provide an individualised estimate of intracranial lesion risk. The aim of this study is to create a model that estimates individualised intracranial lesion risks in patients with mTBI who present to the ED. Methods and analysis This will be a retrospective cohort study conducted at ED hospitals in Stockholm, Sweden. Eligible patients are adults (>= 15 years) with mTBI who presented to the ED within 24 hours of injury and performed a CT scan. The primary outcome will be a traumatic lesion on head CT. The secondary outcomes will be any clinically significant lesion, defined as an intracranial finding that led to neurosurgical intervention, hospital admission >= 48 hours due to TBI or death due to TBI. Machine-learning models will be applied to create scores predicting the primary and secondary outcomes. An estimated 20 000 patients will be included. Ethics and dissemination The study has been approved by the Swedish Ethical Review Authority (Dnr: 2020-05728). The research findings will be disseminated through peer-reviewed scientific publications and presentations at international conferences.
|
|
