| 1. |
- Vedantha Krishna, Amogh, 1990-, et al.
(författare)
-
Potential approach towards effective topography characterization of 316L stainless steel components produced by selective laser melting process
- 2018
-
Ingår i: European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 18th International Conference and Exhibition, EUSPEN 2018. - Bedford : euspen. - 9780995775121 - 0995775125 ; , s. 259-260
-
Konferensbidrag (refereegranskat)abstract
- In this paper, an attempt is made to explain the surface texture of Selective Laser Melting (SLM) parts more satisfyingly than the existing methods. Investigations were carried out on the 316L stainless steel SLM samples. To account for most of the surface conditions, a truncheon artefact was employed for the analysis. A Stylus Profilometer was employed as a metrology tool for obtaining the 3D surface measurements. A methodology is proposed to extract and characterize the topographic features of Additive Manufactured (AM) surfaces. Here, the overall roughness of the surface is segregated into the roughness of the powder particles and the waviness due to thermal and the "staircase" effects. Analyzing these features individually results in an increased understanding of the AM process and an opportunity to optimize machine settings.
|
|
| 2. |
- Dimkovski, Zlate, et al.
(författare)
-
Complementing 3D Roughness Parameters for Monitoring of Improved Honing of Cylinder Bores
- 2008
-
Ingår i: Proceedings of the Swedish Production Symposium (SPS) - 2008. - 9783939026952
-
Konferensbidrag (refereegranskat)abstract
- It is of common interest to reduce the oil consumption and frictional losses in the internal combustion engines which are in a great deal influenced by the quality of the cylinder liner surface. Its criss-cross patterned topography consists of a communicating system of grooves of different density, width, and depth, somewhere covered by folded metal, and somewhere totally interrupted and unbalanced as a result of the honing process imperfections. These features are crucial for a good liner’s function and are inspected from scanning electron microscope images by experts, which is subjective and time consuming process. Today, a fast automatic quality control is possible by using optical instruments to measure the liner’s topography, and a computer to calculate and check if the standard roughness and groove parameters are in tolerance. Therefore, combining the profile and image analysis, algorithms were developed to compute liner’s groove parameters from 3D interference measurements taken from three different types of cylinder bore surfaces of passenger cars. One of the surface types was a result of a test of an improved honing and the other two being currently in use. Then, the standard and new parameters (groove interruption, number of grooves, holes, etc) were incorporated in a characterisation tool to objectively and quickly evaluate the improvement of the liner’s quality for an updated monitoring in production.
|
|
| 3. |
- Berglund, Johan C, 1978, et al.
(författare)
-
A Method for Visualization of Surface Texture Anisotropy in Different Scales of Observation
- 2011
-
Ingår i: Scanning. - : John Wiley & Sons. - 0161-0457 .- 1932-8745. ; 33:5, s. 325-331
-
Tidskriftsartikel (refereegranskat)abstract
- Anisotropy of functional surfaces can in many practical cases significantly influence the surface function. Tribological contacts in sheet forming and engine applications are good examples. This article introduces and exemplifies a method for visualization of anisotropy. In a single graph, surface texture properties related to the anisotropy as a function of scale are plotted. The anisotropy graph can be used to explain anisotropy properties of a studied surface such as texture direction and texture strength at different scales of observation. Examples of milled steel surfaces and a textured steel sheet surface are presented to support the proposed methodology. Different aspects of the studied surfaces could clearly be seen at different scales. Future steps to improve filtering techniques and an introduction of length-scale analysis are discussed.
|
|
| 4. |
- Dimkovski, Zlate, 1974-, et al.
(författare)
-
Towards 3D Characterisation of Cylinder Liner Surfaces
- 2008
-
Ingår i: Proceedings / XII. International Colloquium on Surfaces January 28th and 29th, 2008, Chemnitz, Germany = XII. Internationales Oberflächenkolloquium. - Aachen : Shaker Verlag. - 9783832269128 ; , s. 15-24
-
Konferensbidrag (refereegranskat)abstract
- Cylinder liner surface has a direct impact on the oil consumption and frictional losses in the internal combustion engines which are in common interest to be as lower as possible. Thus, the optimisation of the liner surface, its function and manufacture is often on the agenda of the automotive industry. Since the liner surface finish is a subject of improving, there is a need of improving and facilitating of its 3D characterisation preliminary when the parameter control limits are unknown, as well as later when it is experimentally verified and the limits are better determined. For that purpose a method for quality control in 3D of cylinder liners is proposed here. A tool was developed and implemented for rating of cylinder liner surfaces, computing of 3D groove parameters (groove width, height and distance between grooves) and determination of a needed number of measurements.
|
|
| 5. |
- Rosen, Bengt-Göran, 1962, et al.
(författare)
-
Topographic modelling of haptic properties of tissue products
- 2014
-
Ingår i: Journal of Physics: Conference Series. - Bristol : IOP Publishing. - 1742-6588 .- 1742-6596. ; 483:1
-
Konferensbidrag (refereegranskat)abstract
- The way a product or material feels when touched, haptics, has been shown to be a property that plays an important role when consumers determine the quality of products For tissue products in constant touch with the skin, softness becomes a primary quality parameter. In the present work, the relationship between topography and the feeling of the surface has been investigated for commercial tissues with varying degree of texture from the low textured crepe tissue to the highly textured embossed- and air-dried tissue products. A trained sensory panel at was used to grade perceived haptic «roughness». The technique used to characterize the topography was Digital light projection (DLP) technique, By the use of multivariate statistics, strong correlations between perceived roughness and topography were found with predictability of above 90 percent even though highly textured products were included. Characterization was made using areal ISO 25178-2 topography parameters in combination with non-contacting topography measurement. The best prediction ability was obtained when combining haptic properties with the topography parameters auto-correlation length (Sal), peak material volume (Vmp), core roughness depth (Sk) and the maximum height of the surface (Sz). © Published under licence by IOP Publishing Ltd.
|
|
| 6. |
- Wiklund, Daniel, et al.
(författare)
-
Evaluation of surface topography parameters for friction prediction in stamping
- 2004
-
Ingår i: Wear. - Amsterdam : Elsevier. - 0043-1648 .- 1873-2577. ; 257:12, s. 1296-1300
-
Tidskriftsartikel (refereegranskat)abstract
- The continued globalisation of the automotive industry, leading to increasing demands for competitiveness and escalating legislative requirements, is the main driving force of research activities of steel sheet surfaces. Recent studies on the stamping process have been carried out among others within AUTOsurf, a project funded by the European Community, and by Wihlborg and Crafoord. The purpose of this study was to evaluate the viability of the proposed parameters for friction prediction. Seventeen different surface topographies were investigated. The sheet materials were either, hot-dip galvanised, electrogalvanised or galvannealed, and electron beam or electric discharged textures. The frictional response was measured in a bending under tension (BUT) test under mixed lubricated conditions. This BUT test simulates the conditions of the die radius in a stamping tool. The laboratory test differs from the experimental work performed in AUTOsurf which simulated the conditions of the holding-down plate. In spite of the differences in test equipments in AUTOsurf, e.g. the rotational friction tester (RTF), on a comparison the correlation of frictional response was significant. But neither of the proposed parameters could predict the frictional response with sufficient accuracy in this study. In addition, the friction model in AUTOsurf describes peak lubrication as a dragging phenomenon on sliding surfaces. The movement eased friction in inverse proportion to the average peak area. However, the trend in this study showed the opposite, movement eased friction proportionally to the average peak area. The result indicates a switch of dominant friction mechanism when the sliding velocity is increased, i.e. from a dragging phenomenon at low velocities to micro-hydrodynamic wedge effects at high velocities.
|
|
| 7. |
|
|
| 8. |
- Wiklund, Daniel, 1970-
(författare)
-
Tribology of stamping : the influence of designed steel sheet surface topography on friction
- 2006
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Tribology is the science of friction, wear, and lubrication; the interaction of surfaces in relative motion. The tribological conditions in sheet metal forming influences the flow of material in forming operations, the strain distributions of sheet material, extent of wear, and thereby the quality of products. The purpose of the thesis is to increase the knowledge of why and how sheet surface topography influence the frictional response in stamping, to characterise the geometrical properties, and make results applicable for industry. The frictional response of different surface topographies have been measured in a Bending Under Tension test under mixed lubricated conditions. The studied materials have been stainless steel sheets and uncoated and coated carbon steel sheets. The results did show the influence of roughness, skewness, and anisotropy of surface topography. The findings could be explained by the theory of pad bearings. A new functional 3D parameter (Sq>0) was developed for pressing performance that is sensitive to the effects of roughness and skewness. The texture-aspect ratio parameter (Str) was found to be correlated to the anisotropical behaviour of the frictional response. The results are very tangible and mean increased control of stamping operations. An initial step was taken to introduce more advanced tribological models in FE simulation of sheet metal forming operations. The aim is to decrease the trial-and-error time in the design process of dies and tools. A friction model considering surface topography (Sq>0), sliding velocity, lubricant viscosity, and apparent pressure, was successfully implemented. Simulations of a part were evaluated with real stamping tryouts. The results did show the potential of improving the precision in forming simulations with more advanced tribological models. Finally, theory and characterisation methods of active micro-oil pockets in the contact zone of tool and sheet were investigated. The real contact area was shown to be the critical feature to determine. Therefore, two topographical methods and one microscope-imaging processing technique were studied, but no method was found to be viable. However, the experimental results did not confirm the importance of microoil pockets in mixed lubricated regime.
|
|
| 9. |
- Anderberg, Cecilia, et al.
(författare)
-
Alternative descriptions of roughness for cylinder liner production
- 2009
-
Ingår i: Journal of Materials Processing Technology. - Amsterdam : Elsevier. - 0924-0136 .- 1873-4774. ; 209:4, s. 1936-1942
-
Tidskriftsartikel (refereegranskat)abstract
- The roughness of stratified surfaces such as cylinder liners, produced by plateau honing, is functionally important in their tribology but is notoriously difficult to characterise. An issue in manufacturing quality control related to their tribological function is the comparative ability of various roughness characterisation systems. In this paper the Rk family of parameters is compared with the Rq family as regards stability and discrimination. When coefficients of variation of the two parameter families are compared as a measure of stability, CVs of individual parameters vary between 8% and 20% but do not seem to indicate a clear advantage to either family. When the correlation of parameters within and between the two groups is computed as a measure of relative discriminative ability, many parameters are found to be highly correlated, to the point where values of Rpk and Rpq are effectively indistinguishable. The relative robustness of the parameters is also established by simulation of surface or measurement artefacts: outlying peaks and valleys, high-frequency noise, changes in stylus or skid radius, changes in high-pass filter and in assessment length. Outlying peaks cause a large increase in Rpk, while outlying valleys have little effect. The Rq parameters are more sensitive to high-frequency noise than the Rk parameters. Increasing the stylus radius reduced the valley parameters, while adding a 25 mm radius skid increased Rk and Rpq by as much as 15%. Increasing the short-wavelength cut-off from 2.5 m to 8 m reduced most parameters, particularly the peak parameters, while replacing the robust Gaussian filter used throughout by a valley-suppression filter had little effect. Finally reducing the assessment length from 17 mm to 4 mm decreased the values of many parameters by up to 11%. Increasing plateau honing time decreased plateau roughness, while increasing pressure during coarse honing increased valley roughness, but these changes could not be correlated with roughness parameters. This suggests that the optimum parameter set has not yet been found. 2008 Elsevier B.V. All rights reserved.
|
|
| 10. |
- Anderberg, Cecilia, et al.
(författare)
-
Cylinder Liners and Consequences of Improved Honing
- 2006
-
Ingår i: Proceedings of Nordtrib conference 2006, Helsingor, Danemark. ; , s. 13-
-
Konferensbidrag (refereegranskat)abstract
- The demands on decreased environmental impact from vehicles are resulting in a strong push for decreased engine oil and fuel consumption. Engine oil and fuel consumption are to a great extent controlled by the topography of the cylinder liner surface.Recent engine tests have shown a promising reduction in oil consumption when using cylinder liners with a smoother finish than the current plateau honing.One approach to produce smoother liner surfaces is to replace SiC ceramic honing stones with diamond tools. However, event though the diamond honing process results in higher productivity, improved demands of quality control is needed to monitor the degree of cold worked material - “blechmantel” (German), and the resulting risk of increased wear and scuffing.A number of petrol and diesel engine cylinder liners have been mapped to be able to verify the quality and consequences, in terms of wear and function, of the honing process. A new mapping method, combining SEM images and quantitative image analysis with traditional 2D profilometry has been developed and tested in this study. The liners where tested in a reciprocating rig of 8 mm stroke and with a frequency of 10 Hz, simulating the top-dead center conditions in a running engine.The tests where carried out in high- and low pressure conditions with smooth respectively rough liner roughnesses against PVD coated piston rings. The developed surface mapping method was employed before and after the test to study effect of running-in wear on the surface, features characterized with the SEM- and the 2D profilometer.The results show that combining SEM- and profilometric methods gives a good picture of the effects of varying the cylinder liner pressure and roughness. The core roughness decrease more for diesel liners than for petrol liners. In average (rough and smooth liners) the diesel core roughness decrease 265% while the petrol liners average on a 60% decrease. Blechmantel- and Irregularities ratio show a high sensitivity to varying conditions and decrease 1180% to 100% for the diesel liners while the parameters increase between 106% to 18% for all the petrol liners. A probable cause is the more severe diesel high pressure run-in conditions are able to effectively “truncate” the plateaux and remove residing plastically deformed un-cut honing residues while the less severe petrol liner conditions not manage to remove the blechmantel and irregularities in an important extent.
|
|
