| 1. |
- Eivazihollagh, Alireza, et al.
(författare)
-
On chelating surfactants : Molecular perspectives and application prospects
- 2019
-
Ingår i: Journal of Molecular Liquids. - : Elsevier BV. - 0167-7322 .- 1873-3166. ; 278, s. 688-705
-
Tidskriftsartikel (refereegranskat)abstract
- Chelating agents, molecules that very strongly coordinates certain metal ions, are used industrially as well as in consumer products to minimize disturbances and increase performance of reactions and applications. The widely used sequestering agents, nitrilotriacetic acid (NTA), ethylenediaminetetraacetic acid (EDTA) and diethylenetriaminepentaacetic acid (DTPA) belong to this branch of readily water-soluble compounds. When these chemical structures also have hydrophobic parts, they are prone to adsorb at air-water interfaces and to self-assemble. Such bifunctional molecules can be called chelating surfactants and will have more extended utilization prospects than common chelating agents or ordinary ionic surfactants. The present review attempts to highlight the fundamental behavior of chelating surfactants in solution and at interfaces, and their very specific interactions with metal ions. Methods to recover chelating surfactants from metal chelates are also described. Moreover, utilization of chelating surfactants in applications for metal removal in environmental engineering and mineral processing, as well as for metal control in the fields of biology, chemistry and physics, is exemplified and discussed.
|
|
| 2. |
- Mathern, Alexandre, 1986, et al.
(författare)
-
Concrete Support Structures for Offshore Wind Turbines: Current Status, Challenges, and Future Trends
- 2021
-
Ingår i: Energies. - : MDPI AG. - 1996-1073 .- 1996-1073. ; 14:7
-
Forskningsöversikt (refereegranskat)abstract
- Today’s offshore wind turbine support structures market is largely dominated by steel structures, since steel monopiles account for the vast majority of installations in the last decade and new types of multi-leg steel structures have been developed in recent years. However, as wind turbines become bigger, and potential sites for offshore wind farms are located in ever deeper waters and ever further from the shore, the conditions for the design, transport, and installation of support structures are changing. In light of these facts, this paper identifies and categorizes the challenges and future trends related to the use of concrete for support structures of future offshore wind projects. To do so, recent advances and technologies still under development for both bottom-fixed and floating concrete support structures have been reviewed. It was found that these new developments meet the challenges associated with the use of concrete support structures, as they will allow the production costs to be lowered and transport and installation to be facilitated. New technologies for concrete support structures used at medium and great water depths are also being developed and are expected to become more common in future offshore wind installations. Therefore, the new developments identified in this paper show the likelihood of an increase in the use of concrete support structures in future offshore wind farms. These developments also indicate that the complexity of future support structures will increase due to the development of hybrid structures combining steel and concrete. These evolutions call for new knowledge and technical know-how in order to allow reliable structures to be built and risk-free offshore installation to be executed.
|
|
| 3. |
- Stolen, Reidar, et al.
(författare)
-
Solcelleteknologi og brannsikkerhet
- 2018
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- Bruken av solcelleteknologi er i stor vekst i Norge. I denne studien er branntekniske utfordringer ved bruk av solcelleteknologi undersøkt, med hensyn på brannstart, brannspredning og brannslokking. Studien danner et kunnskapsgrunnlag for å ivareta brannsikkerheten under montering, drift og under slokkeinnsats, samt for å utforme et enhetlig og tydelig regelverk. Resultatene fra studien viser:Brannstart: Solcelleinstallasjoner inneholder mange koblingspunkt, som kan være potensielle tennkilder, og en liten mengde brennbare materialer. Dermed er det som trengs til stede for å starte en brann. Det er viktig at alle kontaktpunkter i solcelleinstallasjonen er robuste og tåler den påkjenningen de blir utsatt for gjennom sin levetid uten at det oppstår dårlig kontakt som kan føre til brann.Brannspredning: For utenpåmonterte solcellemoduler er det ofte en åpen luftspalte mellom modul og bygning. Dersom det er en brann i denne luftspalten, vil varmen kunne bli akkumulert, noe som kan føre til raskere og større brannspredning enn om bygningsoverflaten ikke hadde vært tildekket. I fullskalaforsøk med solcellemoduler montert på tak spredte brannen seg under hele arealet som var dekket av moduler, men stoppet da den nærmet seg kanten av dette arealet. Dette illustrerer viktigheten av at områder med solceller utenpå en bygning blir seksjonert for å unngå brannspredning. Eventuelt kan det benyttes mindre brennbare materialer på taket under solcellemodulene for å motvirke den økte varmepåkjenningen som solcellemodulene gir. Luftspalten mellom modul og bygning kan potensielt også gi endringer i luftstrømningen langs bygget, som igjen kan påvirke brannspredningen.Brannslokking: Brannvesenet har behov for informasjon om det er solcelleinstallasjon i bygget og hvilke deler av det elektriske anlegget som kan være spenningssatt. Under slokkeinnsats må brannvesenet ta hensyn til berøringsfare, og fare for at det kan oppstå lysbuer og andre feil som kan føre til nye antennelsespunkt. Ferskvann kan brukes som slokkemiddel, dette må spyles fra minimum 1 meters avstand med spredt stråle og minimum 5 meters avstand med samlet stråle. Solcellemoduler kan komplisere brannslokking ved at de danner en fysisk barriere mellom brannvesenet og brannen, samt fordi det må tas hensyn til plassering av spenningssatte komponenter. Når disse punktene er tatt høyde for, bør ikke utenpåmonterte solcelleinstallasjoner være et problem.Videre arbeid: For utenpåmonterte solcelleinstallasjoner, er det lite forskning på vertikal montering (på fasader), og hvordan en eventuell endret branndynamikk kan påvirke brannspredning og slokking. Videre er det i dag økende bruk av bygningsintegrerte solcelleinstallasjoner, noe som gir mange mulige nye utfordringer for brannsikkerheten og for regelverk, ettersom solcellen da er en del av bygningskroppen, samtidig som den er en elektrisk komponent. Tysk statistikk tyder på at brannrisiko for slike installasjoner kan være større enn for utenpåmonterte solcelleinstallasjoner, og dette vil det derfor være viktig å undersøke nærmere.
|
|
| 4. |
- Nissilä, Niina, et al.
(författare)
-
”Av intresse för saken dristar jag mig att till diskussion framlägga ett par spörsmål” – Kaksi suomalaista akateemista uranuurtajaa terminologiaverkoston kirjeenvaihdossa
- 2021
-
Ingår i: Workplace Communication IV (VAKKI Publications 13.) Eds H. Katajamäki, M. Enell-Nilsson, H. Kauppinen-Räisänen, L. Kääntä & H. Salovaara. - 2242-6841 .- 2242-685X. ; 13, s. 153-168
-
Tidskriftsartikel (refereegranskat)abstract
- The Swedish Tekniska Nomenklaturcentralen TNC (2000–2018 Terminologicentrum TNC) has been Sweden's national center for special languages and terminology work for more than 75 years. Since its founding in 1941, the TNC has been active not only in Sweden, but also in establishing and maintaining international contacts. The article describes the contacts between actors in the Swedish and Finnish terminology field, looking in particular at the contacts between the TNC and actors in the Finnish higher education sector between the 1940s and the 1990s. The method utilized is close reading and content analysis. The research material used is the collection of foreign correspondence in the TNC's document archive, and in particular the section stored in connection with the code Ufin, i.e. sections concerning communication between the TNC and Finnish actors. The article describes the topics covered in the communication, the objectives and consequences of the communication and the results achieved. The article focuses especially on the contacts between the TNC and two active actors in Finland, professor Jarl Salin at the Åbo Akademi University and professor Christer Laurén at the University of Vaasa. In the analysis, the Ufin themes of the letters were categorized in four main categories: publications, communication, information and language issues. In professor Jarl Salins letters, the most common theme were language issues, whereas Professor Christer Laurén contacted TNC especially in connection with publications and publishing.
|
|
| 5. |
- Hörteborn, Axel, 1986, et al.
(författare)
-
Economic incentives and technological limitations govern environmental impact of LNG feeder vessels
- 2023
-
Ingår i: Journal of Cleaner Production. - : Elsevier Ltd. - 0959-6526 .- 1879-1786. ; 429
-
Tidskriftsartikel (refereegranskat)abstract
- In the transition to sustainable shipping, Liquified Natural Gas (LNG), is proposed to play a role, reducing emissions of sulphur and nitrogen oxides, and particulate matter. However, LNG is a fossil fuel and there is an ongoing discussion regarding the extent of methane slip from ships operating on LNG, challenging the assumptions of LNG as a sustainable solution. Here we show another aspect to consider in the environmental assessment of shipping; LNG feeder vessels may spend as much as 25% of their time at sea just running the ship to ensure the pressure in the tanks are not exceeded, i.e., run time not directly attributed to the shipment of gas from one port or ship, to another. In other words, the economic incentives are currently allowing for roughly 32% increase of the ships’ operational emissions and discharges and increased navigational risks. Most coastal areas are heavily affected by anthropogenic activities and e.g., in the Baltic Sea there is consensus among the HELCOM member states that the input of nutrient and hazardous substances must be reduced. Even if the LNG feeder vessels are currently few, the possibility to reduce their environmental impact by 32% should be an attractive opportunity for future policy measures and investigation of technological solutions of the problem.
|
|
| 6. |
- Johansson, Björn, 1975, et al.
(författare)
-
Power Level Sampling of Metal Cutting Machines for Data Representation in Discrete Event Simulation
- 2015
-
Ingår i: International Journal of Production Research. - : Informa UK Limited. - 0020-7543 .- 1366-588X. ; 53:23, s. 7060-7070
-
Tidskriftsartikel (refereegranskat)abstract
- An extension to the application area for discrete event simulation (DES) has been ongoing since the last decade and focused only on economic aspects to include ecologic sustainability. With this new focus, additional input parameters, such as electrical power consumption of machines, are needed. This paper aim at investigating how NC machine power consumption should be represented in simulation models of factories. The study includes data-sets from three different factories. One factory producing truck engine blocks, one producing brake disc parts for cars and one producing forklift components. The total number of data points analysed are more than 2,45,000, where of over 1,11,000 on busy state for 11 NC machines. The low variability between busy cycles indicates that statistical representations are not adding significant variability. Furthermore, results show that non-value-added activities cause a substantial amount of the total energy consumption, which can be reduced by optimising the production flow using dynamic simulations such as DES.
|
|
| 7. |
- Skagestad, Ragnhild, 1978, et al.
(författare)
-
GCCSI Webinar: Cutting Cost of CO2 Capture in Process Industry (CO2stCap) Project overview & first results for partial CO2 capture at integrated steelworks
- 2017
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- GCCSI Webinar: Cutting Cost of CO2 Capture in Process Industry (CO2stCap) Project overview & first results for partial CO2 capture at integrated steelworks This publication has the format of a webinar: The CO2StCap project is a four year initiative carried out by industry and academic partners with the aim of reducing capture costs from CO2 intensive industries (more information here). The project, led by Tel-Tek, is based on the idea that cost reduction is possible by capturing only a share of the CO2 emissions from a given facility, instead of striving for maximized capture rates. This can be done in multiple ways, for instance by capturing only from the largest CO2 sources at individual multi-stack sites utilising cheap waste heat or adapting the capture volumes to seasonal changes in operations. The main focus of this research is to perform techno-economic analyses for multiple partial CO2 capture concepts in order to identify economic optimums between cost and volumes captured. In total for four different case studies are developed for cement, iron & steel, pulp & paper and ferroalloys industries. The first part of the webinar gave an overview of the project with insights into the cost estimation method used. The second part presented the iron & steel industry case study based on the Lulea site in Sweden, for which waste-heat mapping methodology has been used to assess the potential for partial capture via MEA-absorption. Capture costs for different CO2 sources were discussed, demonstrating the viability of partial capture in an integrated steelworks.
|
|
| 8. |
- Johansson, Björn, 1975, et al.
(författare)
-
Evaluation and Calculation of Dynamics in Environmental Impact Assessment
- 2013
-
Ingår i: IFIP Advances in Information and Communication Technology. - Berlin, Heidelberg : Springer Berlin Heidelberg. - 1868-4238 .- 1868-422X. - 9783642403514 ; 397:1, s. 135-141
-
Konferensbidrag (refereegranskat)abstract
- In ten years customers will select products not only based on price and quality but also with strong regard to the product value environmental footprint, including for example the energy consumed. Customers expect transparency in the product realization process, where most products are labeled with their environmental footprint. Vigorous companies see this new product value as an opportunity to be more competitive. In order to effectively label the envi-ronmental impact of a product, it is pertinent for companies to request the envi-ronmental footprint of each component from their suppliers. Hence, companies along the product lifecycle require a tool, not only to facilitate the computing of the environmental footprint, but also help reduce/balance the environmental impact during the lifecycle of the product. This paper proposes to develop a procedure that companies will use to evaluate, improve and externally advertise their product’s environmental footprint to customers.
|
|
| 9. |
- Andersson, Viktor, 1983
(författare)
-
Excess heat utilisation in oil refineries - CCS and algae-based biofuels
- 2016
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The main objective of this thesis is to investigate two different concepts for CO2 mitigation, from a system perspective, in relation to the oil refining industry: CO2 capture and storage; and algae-based biofuels. For all these processes, process integration with an oil refinery is assumed. The oil refinery sector is a major emitter of CO2 and is responsible for 9% of the industrial emissions of CO2 worldwide. Oil refineries have large amounts of unused excess heat, which can be used to satisfy the heat demands of a CO2 capture plant, a land-based algal cultivation facility, or an algae-based biofuel process. The use of this excess heat significantly reduces the cost for CO2 capture, while an economic evaluation for algae-based biofuels has not been made.Since the amount of heat available from the oil refinery´s processes increase with decreasing temperature in the stripper reboiler, it was investigated how much heat was available at different temperatures. It was also investigated how the decreased temperature would affect the heat demand of CO2 capture processes that use MEA or ammonia as the absorbent. The findings show that it is possible to capture more CO2 using excess heat when the temperature in the stripper reboiler is decreased. For the MEA process, the lower limit of the temperature interval investigated showed the maximum CO2 capture rate, while the ammonia process benefitted from a lower temperature than the standard temperature but showed maximal CO2 capture rate above the lower limit. These results are valid only when using excess heat to satisfy the entire heat demand. At the case study refinery, the available excess heat could satisfy between 28% and 50% of the heat demand of the MEA process when treating the flue gases from all chimneys, depending on the temperature in the stripper reboiler. This utilisation of excess heat represents a way to reduce significantly the costs for CCS in an oil refinery. Land-based cultivation of algae proved to be unsuitable for the utilisation of excess heat. Since the cultivation pond is exposed to wind, rain, and cold, the heat demand fluctuates strongly over the year, making the pond an unstable recipient of the excess heat.Three types of biofuel processes based on microalgae and macroalgae were investigated with respect to integration with the oil refinery. For the algae-based biofuel processes, heat integration and material integration combined to increase the efficiency of the system. When two different build margin technologies (with different CO2 emission factors) are employed for electricity production, macroalgae-based biofuel production appears to be the more robust process from the perspective of CO2 due to the lower electricity demands of the algal cultivation and harvesting phases.
|
|
| 10. |
- Lindahl, Niklas, 1981, et al.
(författare)
-
Early stage techno-economic and environmental analysis of aluminium batteries
- 2023
-
Ingår i: Energy Advances. - : Royal Society of Chemistry (RSC). - 2753-1457. ; 2:3, s. 420-429
-
Tidskriftsartikel (refereegranskat)abstract
- For any proper evaluation of next generation energy storage systems technological, economic, and environmental performance metrics should be considered. Here conceptual cells and systems are designed for different aluminium battery (AlB) concepts, including both active and passive materials. Despite the fact that all AlBs use high-capacity metal anodes and materials with low cost and environmental impact, their energy densities differ vastly and only a few concepts become competitive taking all aspects into account. Notably, AlBs with high-performance inorganic cathodes have the potential to exhibit superior technological and environmental performance, should they be more reversible and energy efficient, while at the system level costs become comparable or slightly higher than for both AlBs with organic cathodes and lithium-ion batteries (LIBs). Overall, with continued development, AlBs should be able to complement LIBs, especially in light of their significantly lower demand for scarce materials. Several aluminium battery concepts are evaluated at material, cell and system levels for technical, economic and environmental performance, which enables them to complement lithium-ion batteries in the future.
|
|
