| 1. |
- Lindahl, Niklas, 1981, et al.
(författare)
-
Early stage techno-economic and environmental analysis of aluminium batteries
- 2023
-
Ingår i: Energy Advances. - : Royal Society of Chemistry (RSC). - 2753-1457. ; 2:3, s. 420-429
-
Tidskriftsartikel (refereegranskat)abstract
- For any proper evaluation of next generation energy storage systems technological, economic, and environmental performance metrics should be considered. Here conceptual cells and systems are designed for different aluminium battery (AlB) concepts, including both active and passive materials. Despite the fact that all AlBs use high-capacity metal anodes and materials with low cost and environmental impact, their energy densities differ vastly and only a few concepts become competitive taking all aspects into account. Notably, AlBs with high-performance inorganic cathodes have the potential to exhibit superior technological and environmental performance, should they be more reversible and energy efficient, while at the system level costs become comparable or slightly higher than for both AlBs with organic cathodes and lithium-ion batteries (LIBs). Overall, with continued development, AlBs should be able to complement LIBs, especially in light of their significantly lower demand for scarce materials. Several aluminium battery concepts are evaluated at material, cell and system levels for technical, economic and environmental performance, which enables them to complement lithium-ion batteries in the future.
|
|
| 2. |
- Thomas, Jean-Baptiste, et al.
(författare)
-
A comparative environmental life cycle assessment of hatchery, cultivation, and preservation of the kelp Saccharina latissima
- 2021
-
Ingår i: Ices Journal of Marine Science. - : Oxford University Press (OUP). - 1054-3139 .- 1095-9289. ; 78:1, s. 451-467
-
Tidskriftsartikel (refereegranskat)abstract
- Seaweed cultivation and processing industries could contribute to sustainable blue growth and the European bioeconomy. This article contributes a case study evaluation of environmental sustainability of preserved brown seaweed Saccharina latissima by means of environmental life cycle assessment of a pilot facility in Sweden. The study accounts for nutrient bioremediation and carbon capture and includes two alternative hatchery processes, a 2-ha longline cultivation, and four alternative preservation methods (hang-drying outdoors, heated air-cabinet drying, ensiling, and freezing). The study found that as a result of carbon capture and nitrogen and phosphorus uptake (bioremediation) by seaweed, more CO2 and PO4 equivalents are (temporarily) absorbed than emitted by the supply chain. The extent of emissions is most affected by preservation methods undertaken. Impact profiles of the supply chain show that the greatest impact shares result from freezing and air-cabinet drying, both the two most energy-intensive processes, followed by the cultivation infrastructure, highlighting strategic optimization opportunities. Hatchery processes, harvesting, and the low-energy ensilage and hang-drying outdoors were found to have relatively small impact shares. These findings presage the environmentally friendliness of seaweed-based products by documenting their potential to mitigate eutrophication and climate change, even when taking a life cycle perspective.
|
|
| 3. |
- Diamond, Miriam, et al.
(författare)
-
Exploring the planetary boundary for chemical pollution
- 2015
-
Ingår i: Environment International. - : Elsevier BV. - 0160-4120 .- 1873-6750. ; 78, s. 8-15
-
Forskningsöversikt (refereegranskat)abstract
- Rockström et al. (2009a, 2009b) have warned that humanity must reduce anthropogenic impacts defined by nine planetary boundaries if “unacceptable global change” is to be avoided. Chemical pollution was identified as one of those boundaries for which continued impacts could erode the resilience of ecosystems and humanity. The central concept of the planetary boundary (or boundaries) for chemical pollution (PBCP or PBCPs) is that the Earth has a finite assimilative capacity for chemical pollution, which includes persistent, as well as readily degradable chemicals released at local to regional scales, which in aggregate threaten ecosystem and human viability. The PBCP allows humanity to explicitly address the increasingly global aspects of chemical pollution throughout a chemical's life cycle and the need for a global response of internationally coordinated control measures. We submit that sufficient evidence shows stresses on ecosystem and human health at local to global scales, suggesting that conditions are transgressing the safe operating space delimited by a PBCP. As such, current local to global pollution control measures are insufficient. However, while the PBCP is an important conceptual step forward, at this point single or multiple PBCPs are challenging to operationalize due to the extremely large number of commercial chemicals or mixtures of chemicals that cause myriad adverse effects to innumerable species and ecosystems, and the complex linkages between emissions, environmental concentrations, exposures and adverse effects. As well, the normative nature of a PBCP presents challenges of negotiating pollution limits amongst societal groups with differing viewpoints. Thus, a combination of approaches is recommended as follows: develop indicators of chemical pollution, for both control and response variables, that will aid in quantifying a PBCP(s) and gauging progress towards reducing chemical pollution; develop new technologies and technical and social approaches to mitigate global chemical pollution that emphasize a preventative approach; coordinate pollution control and sustainability efforts; and facilitate implementation of multiple (and potentially decentralized) control efforts involving scientists, civil society, government, non-governmental organizations and international bodies.
|
|
| 4. |
- Wahlström, Niklas, et al.
(författare)
-
Ulvan dialdehyde-gelatin hydrogels for removal of heavy metals and methylene blue from aqueous solution
- 2020
-
Ingår i: Carbohydrate Polymers. - : ELSEVIER SCI LTD. - 0144-8617 .- 1879-1344. ; 249
-
Tidskriftsartikel (refereegranskat)abstract
- Hydrogels based on the polysaccharide ulvan from the green macroalgae Ulva fenestrata were synthesized and evaluated as an adsorbent for heavy metals ions and methylene blue. Ulvan was extracted from Ulva fenestrata using diluted hydrochloric acid and recovered by precipitation with EtOH. The extracted ulvan was converted into ulvan dialdehyde via periodate-oxidation and subsequently combined with gelatin yielding hydrogels. The hydrogels showed good water-uptake capacity with a maximum swelling degree of 2400 % in water and 900 % in PBS buffer. Adsorption tests of methylene blue showed a maximum adsorption capacity of 465 mg/g. The adsorption data of methylene blue followed the pseudo-second order kinetics and agreed with the Langmuir adsorption isotherm. The maximum adsorption capacity of heavy metal ions was 14 mg/g for Cu2+, 7 mg/g for Co2+ and 6 mg/g for Ni2+ and Zn2+ indicating that the hydrogels have a stronger affinity for Cu2+ than for Co2+, Ni2+, and Zn2+.
|
|
| 5. |
- Awais, Fawad, et al.
(författare)
-
Logistic characteristics and requirements of Swedish wood biofuel heating plants
- 2021
-
Ingår i: Renewable & sustainable energy reviews. - : Elsevier Ltd. - 1364-0321 .- 1879-0690. ; 138
-
Tidskriftsartikel (refereegranskat)abstract
- The demand for wood biofuel for district heating plants and combined heat and power plants (CHPs) has increased, caused by an increase in both the number and size of CHPs. This places large demands on the logistics system supplying these plants with fuel, with a particular interest in the use of alternative modes of transport such as rail and sea. The aim of this paper is to identify the industry actors’ requirements, constraints, and preferences regarding the wood-biofuel supply chain and to identify the logistical challenges this entails, as well as how this impacts the opportunity for an increased use of alternative transport solutions. A survey was sent to all Swedish CHPs, combined with six interviews with transport companies, terminal operators, and forest companies. The study shows that the industry has a local focus that limits potential logistics and sourcing solutions. It is also challenged by urban sprawl, with expanding residential areas close to the CHPs putting further constraints on the operations. Significant variations in fuel demand, depending on unpredictable outside temperature and seasonal variation, is a further challenge. The low density of the fuel has a negative impact on transport costs and introduces a trade-off between chipping close to the forest to increase density versus more efficient chipping at the CHP. Intermodal transport only used by large plants, driven by a shortage of local fuel. © 2020 The Authors
|
|
| 6. |
- Holmberg, John, 1963, et al.
(författare)
-
Low-carbon transitions and the good life
- 2012
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- A transition to a low-carbon economy requires farreaching reductions in emissions, which in addition will have to take place at the same time as the global population is growing. A growing population also makes ever greater demands on welfare, while the ecological, social and economic systems that have to sustain this development are already under severe strain. It is commonly argued that emission reductions in a growing world economy can and should be achieved by technical innovations so that the transition to a low-carbon economy does not imply a negative impact on human well-being.This report discusses whether there might perhaps be another way of understanding the situation. Is the presumed linkage between well-being and climate impact always negative? Could a greater focus on human well-being be a driver of, rather than an obstacle to, sustainable development? This report attempts to identify possible strategies to support both [the good life] and decreased emissions. By adopting this research approach, the authors aim to make a contribution to the discussion of low-carbon transitions in society.
|
|
| 7. |
- Johnsson, Filip, 1960, et al.
(författare)
-
The framing of a sustainable development goals assessment in decarbonizing the construction industry – Avoiding “Greenwashing”
- 2020
-
Ingår i: Renewable and Sustainable Energy Reviews. - : Elsevier BV. - 1879-0690 .- 1364-0321. ; 131
-
Tidskriftsartikel (refereegranskat)abstract
- The aim of this paper is to contribute to the establishment of a robust framework for the assessment of Sustainable Development Goals (SDGs) in businesses, using the construction industry as an example and with the primary focus on combating climate change (SDG 13). We provide a critical analysis of a selection of relatively widely used SDG impact assessment tools, combined with a case study from the construction industry to explore how a meaningful SDG assessment can be framed with linkages between SDG 13 and other related SDGs. Our analysis points towards the importance of framing SDG assessments in a way that discourages “Greenwashing”. Any SDG assessment that relates to climate targets in line with the Paris Agreement should identify the processes and activities that can be expected to be particularly challenging in terms of their abatement. In our road construction work case, we identify four such hard-to-abate activities: 1) introducing biomass for renewable transportation fuels for use in construction equipment and heavy transport; 2) electrification of transport and industrial processes; 3) substitution as part of transitioning from fossil fuel use; and 4) applying carbon capture and storage technologies in the production of basic materials, such as cement and steel. The approach applied will avoid that businesses only focus on SDGs in situations where they are already performing well or can apply low-cost measures or that they only relate to the part of the supply chain that pertains to their own business (Scope 1 emissions). For an SDG assessment to provide basis for informed decisions regarding real change towards more sustainable and equitable corporate practices it should: (i) identify and include concrete measures to align with the terms of the Paris Agreement; (ii) include relevant value chains; and (iii) consider both the short-term and long-term effects of strategic choices.
|
|
| 8. |
- Karlsson, Ida, 1980, et al.
(författare)
-
Roadmap for Decarbonization of the Building and Construction Industry - A Supply Chain Analysis Including Primary Production of Steel and Cement
- 2020
-
Ingår i: Energies. - : MDPI AG. - 1996-1073 .- 1996-1073. ; 13:16
-
Tidskriftsartikel (refereegranskat)abstract
- Sweden has committed to reducing greenhouse gas (GHG) emissions to net-zero by 2045. Around 20% of Sweden's annual CO(2)emissions arise from manufacturing, transporting, and processing of construction materials for construction and refurbishment of buildings and infrastructure. In this study, material and energy flows for building and transport infrastructure construction is outlined, together with a roadmap detailing how the flows change depending on different technical and strategical choices. By matching short-term and long-term goals with specific technology solutions, these pathways make it possible to identify key decision points and potential synergies, competing goals, and lock-in effects. The results show that it is possible to reduce CO(2)emissions associated with construction of buildings and transport infrastructure by 50% to 2030 applying already available measures, and reach close to zero emissions by 2045, while indicating that strategic choices with respect to process technologies and energy carriers may have different implications on energy use and CO(2)emissions over time. The results also illustrate the importance of intensifying efforts to identify and manage both soft and hard barriers and the importance of simultaneously acting now by implementing available measures (e.g., material efficiency and material/fuel substitution measures), while actively planning for long-term measures (low-CO(2)steel or cement).
|
|
| 9. |
- Lehtveer, Mariliis, 1983, et al.
(författare)
-
Actuating the European Energy System Transition: Indicators for Translating Energy Systems Modelling Results into Policy-Making
- 2021
-
Ingår i: Frontiers in Energy Research. - : Frontiers Media SA. - 2296-598X. ; 9
-
Tidskriftsartikel (refereegranskat)abstract
- In this paper, we define indicators, with a focus on the electricity sector, that translate the results of energy systems modelling to quantitative entities that can facilitate assessments of the transitions required to meet stringent climate targets. Such indicators, which are often overlooked in model scenario presentations, can be applied to make the modelling results more accessible and are useful for managing the transition on the policy level, as well as for internal evaluations of modelling results. We propose a set of 13 indicators related to: 1) the resource and material usages in modelled energy system designs; 2) the rates of transition from current to future energy systems; and 3) the energy security in energy system modelling results. To illustrate its value, the proposed set of indicators is applied to energy system scenarios derived from an electricity system investment model for Northern Europe. We show that the proposed indicators are useful for facilitating discussions, raising new questions, and relating the modelling results to Sustainable Development Goals and thus facilitate better policy processes. The indicators presented here should not be seen as a complete set, but rather as examples. Therefore, this paper represents a starting point and a call to other modellers to expand and refine the list of indicators.
|
|
| 10. |
- Nikopoulou, Zoi, 1975
(författare)
-
Incremental costs for reduction of air pollution from ships: a case study on North European emission control area
- 2017
-
Ingår i: Maritime Policy and Management. - : Informa UK Limited. - 0308-8839 .- 1464-5254. ; 44:8, s. 1056-1077
-
Tidskriftsartikel (refereegranskat)abstract
- © 2017 Informa UK Limited, trading as Taylor & Francis Group In addition to sulphur oxides control, the North and the Baltic Seas have recently been designated as nitrogen oxides control area. Amidst ongoing developments in energy markets and international trade, shipowners have to develop cost-efficient strategies to comply with the new regulation. This study creates and tests a model calculating the incremental costs of abating NO x and SO x emissions under MARPOL Annex VI regulations for the following methods: SCR, HAM and internal engine modifications, marine gas oil, wet scrubbers, and liquefied natural gas propulsion. The model is tested empirically on a broad sample of 244 ships from the Swedish Commercial Fleet database for different operating contexts and fuel prices. Individual ship emission reductions and incremental abatement costs are calculated and the results are presented for the entire studied sample and per ship type class. The study also explores the sensitivity of the chosen abatement methods to cost determinants and to main engine time operation under the light of economic performance and cost-efficiency. The results of the study aim to contribute to company abatement strategy.
|
|
