| 1. |
- Lindahl, Niklas, 1981, et al.
(författare)
-
Early stage techno-economic and environmental analysis of aluminium batteries
- 2023
-
Ingår i: Energy Advances. - : Royal Society of Chemistry (RSC). - 2753-1457. ; 2:3, s. 420-429
-
Tidskriftsartikel (refereegranskat)abstract
- For any proper evaluation of next generation energy storage systems technological, economic, and environmental performance metrics should be considered. Here conceptual cells and systems are designed for different aluminium battery (AlB) concepts, including both active and passive materials. Despite the fact that all AlBs use high-capacity metal anodes and materials with low cost and environmental impact, their energy densities differ vastly and only a few concepts become competitive taking all aspects into account. Notably, AlBs with high-performance inorganic cathodes have the potential to exhibit superior technological and environmental performance, should they be more reversible and energy efficient, while at the system level costs become comparable or slightly higher than for both AlBs with organic cathodes and lithium-ion batteries (LIBs). Overall, with continued development, AlBs should be able to complement LIBs, especially in light of their significantly lower demand for scarce materials. Several aluminium battery concepts are evaluated at material, cell and system levels for technical, economic and environmental performance, which enables them to complement lithium-ion batteries in the future.
|
|
| 2. |
- Ahlgren, Serina, et al.
(författare)
-
Review of methodological choices in LCA of biorefinery systems - key issues and recommendations
- 2015
-
Ingår i: Biofuels, Bioproducts and Biorefining. - : Wiley. - 1932-1031 .- 1932-104X. ; 9:5, s. 606-619
-
Forskningsöversikt (refereegranskat)abstract
- The current trend in biomass conversion technologies is toward more efficient utilization of biomass feedstock in multiproduct biorefineries. Many life-cycle assessment (LCA) studies of biorefinery systems have been performed but differ in how they use the LCA methodology. Based on a review of existing LCA standards and guidelines, this paper provides recommendations on how to handle key methodological issues when performing LCA studies of biorefinery systems. Six key issues were identified: (i) goal definition, (ii) functional unit, (iii) allocation of biorefinery outputs, (iv) allocation of biomass feedstock, (v) land use, and (vi) biogenic carbon and timing of emissions. Many of the standards and guidelines reviewed here provide only general methodological recommendations. Some make more specific methodological recommendations, but these often differ between standards. In this paper we present some clarifications (e.g. examples of research questions and suitable functional units) and methodological recommendations (e.g. on allocation).
|
|
| 3. |
- Bjorn, A., et al.
(författare)
-
Review of life-cycle based methods for absolute environmental sustainability assessment and their applications
- 2020
-
Ingår i: Environmental Research Letters. - : IOP Publishing Ltd. - 1748-9326 .- 1748-9318. ; 15:8
-
Tidskriftsartikel (refereegranskat)abstract
- In many regions and at the planetary scale, human pressures on the environment exceed levels that natural systems can sustain. These pressures are caused by networks of human activities, which often extend across countries and continents due to global trade. This has led to an increasing requirement for methods that enable absolute environmental sustainability assessment (AESA) of anthropogenic systems and which have a basis in life cycle assessment (LCA). Such methods enable the comparison of environmental impacts of products, companies, nations, etc, with an assigned share of environmental carrying capacity for various impact categories. This study is the first systematic review of LCA-based AESA methods and their applications. After developing a framework for LCA-based AESA methods, we identified 45 relevant studies through an initial survey, database searches and citation analysis. We characterized these studies according to their intended application, impact categories, basis of carrying capacity estimates, spatial differentiation of environmental model and principles for assigning carrying capacity. We then characterized all method applications and synthesized their results. Based on this assessment, we present recommendations to practitioners on the selection and use of existing LCA-based AESA methods, as well as ways to perform assessments and communicate results to decision-makers. Furthermore, we identify future research priorities intended to extend coverage of all components of the proposed method framework, improve modeling and increase the applicability of methods. © 2020 The Author(s).
|
|
| 4. |
- Brunklaus, Birgit, 1970, et al.
(författare)
-
The future of Swedish food waste : An environmental assessment of existing and prospective valorization techniques
- 2018
-
Ingår i: Journal of Cleaner Production. - : Elsevier BV. - 0959-6526 .- 1879-1786. ; 202, s. 1-10
-
Tidskriftsartikel (refereegranskat)abstract
- In Sweden, the current dominant valorization of food waste is the production of biogas. However, as current production has low profitability, other options are sought to find more valuable uses of food waste, e.g. as the feedstock for bio-based chemicals. One example is the use of food waste in the production of bio-based succinic acid. In this paper, a LCA study is presented in order to highlight whether biogas production or the production of succinic acid has the lowest environmental impact as valorization option for mixed food waste, and if mixed food waste could be an environmentally preferable feedstock to succinic acid production. The LCA study shows that the environmental results depend on the perspective. From a valorization perspective, food waste has the lowest environmental impact the biogas production. From a feedstock perspective, mixed food waste is an environmentally preferable feedstock to succinic acid production. Although many uncertainties exist because production processes are still being developed, it can be concluded that mixed food waste seems to be a promising feedstock for bio-based chemicals from an environmental point of view, and is of interest to be included in future assessments of bio-based chemicals for the emerging bio-economy. © 2018
|
|
| 5. |
- Holmquist, Hanna, 1982, et al.
(författare)
-
What difference can drop-in substitution actually make? : A life cycle assessment of alternative water repellent chemicals
- 2021
-
Ingår i: Journal of Cleaner Production. - : Elsevier Ltd. - 0959-6526 .- 1879-1786. ; 329
-
Tidskriftsartikel (refereegranskat)abstract
- Per- and polyfluoroalkyl substances (PFASs) are used in durable water repellents (DWRs) on outdoor garments and manufacturers are currently phasing out hazardous PFASs. A critical question is: which alternatives should be chosen? The answer should depend on a holistic assessment, but the published inventory data and methodological guidance for assessing PFAS in products is slim and typically limited to hazard assessment. We aim to provide a holistic assessment of the potential environmental consequences of this phase out of DWRs, going beyond the more traditional hazard-focused substitution assessment to also include a broad life-cycle-based assessment of PFASs and their drop-in alternatives. In this study, potential environmental consequences of the phase out were evaluated by applying a life cycle assessment (LCA) to shell jackets with side-chain fluorinated polymer based (i.e., PFASs) or non-fluorinated alternative DWRs with the aim to support a substitution assessment. We demonstrated an innovative approach to impact assessment by inclusion of PFAS related fate and toxicity and invested effort towards contributing new primary inventory data by using a combination of industry dialogue and performance measurements from our larger project context. From a methodological point of view, this paper demonstrates the state-of-the-art in product LCA of persistent textile chemicals and identifies the current limits of this assessment approach. It also delivers new LCI data of use to other analysts. The LCA results in this paper suggest that jackets without PFASs are environmentally preferable. Potential problem shifting due to increased washing and reimpregnation of the jackets did not outweigh PFAS-related potential toxicity impacts as indicated by LCA results. Based on the results presented here, specific DWRs within the non-fluorinated DWR group could not be identified as preferable to others. This LCA does however provide a relevant starting point for more detailed studies on specific DWR systems and it supports moves to phase-out PFASs from non-essential DWR uses. © 2021 The Authors
|
|
| 6. |
- Janssen, Mathias, 1973, et al.
(författare)
-
Life cycle assessment of lignin-based carbon fibres
- 2019
-
Ingår i: 14th Conference on sustainable development of energy, water and environment systems.
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Lignin-based carbon fibres may replace both glass fibres and fossil-based carbon fibres. The objective of this study was to determine the environmental impact of the production of lignin-based carbon fibres using life cycle assessment. The life cycle assessment was done from cradle to gate and followed an attributional approach. The climate impact per kg of lignin- based carbon fibres produced was 1.50 kg CO2,eq. In comparison to glass fibres, the climate impact was reduced by 32% and the climate impact of fossil-based carbon fibres was an order of magnitude higher. A prospective analysis, in which the background energy system was cleaner, showed that the environmental impact of lignin-based carbon fibres will decrease and outperform the glass fibres and fossil-based carbon fibres from a climate impact point-of-view. The constructed LCA model can be applied in further studies of products that consist of or use lignin-based carbon fibres.
|
|
| 7. |
- Kurdve, Martin, 1971, et al.
(författare)
-
Cost and value drivers in circular material flow logistics
- 2018
-
Konferensbidrag (refereegranskat)abstract
- This case study paper presents system costs and effect on costs due to variation in manufacturing performance in recycling of manufacturing generated waste. One case concern metal, manufacturing waste and the other plastic assembly process waste. There exist potentials for improvements in logistics and operation planning which could be aided by sharing production performance information. There are also potentials to increase value of the recycling material.
|
|
| 8. |
- Martin, Michael, et al.
(författare)
-
Life cycle sustainability evaluations of bio-based value chains: Reviewing the indicators from a Swedish perspective
- 2018
-
Ingår i: Sustainability. - : MDPI AG. - 2071-1050. ; 10:2
-
Forskningsöversikt (refereegranskat)abstract
- Policymakers worldwide are promoting the use of bio-based products as part of sustainable development. Nonetheless, there are concerns that the bio-based economy may undermine the sustainability of the transition, e.g., from the overexploitation of biomass resources and indirect impacts of land use. Adequate assessment methods with a broad systems perspective are thus required in order to ensure a transition to a sustainable, bio-based economy. We review the scientifically published life cycle studies of bio-based products in order to investigate the extent to which they include important sustainability indicators. To define which indicators are important, we refer to established frameworks for sustainability assessment, and include an Open Space workshop with academics and industrial experts. The results suggest that there is a discrepancy between the indicators that we found to be important, and the indicators that are frequently included in the studies. This indicates a need for the development and dissemination of improved methods in order to model several important environmental impacts, such as: water depletion, indirect land use change, and impacts on ecosystem quality and biological diversity. The small number of published social life cycle assessments (SLCAs) and life cycle sustainability assessments (LCSAs) indicate that these are still immature tools; as such, there is a need for improved methods and more case studies.
|
|
| 9. |
- Mc Conville, Jennifer R, 1978, et al.
(författare)
-
Is the Swedish wastewater sector ready for a transition to source separation?
- 2017
-
Ingår i: Desalination and Water Treatment. - : Desalination Publications. - 1944-3994 .- 1944-3986. ; 91, s. 320-328
-
Tidskriftsartikel (refereegranskat)abstract
- Source separation of urine for recycling has been applied in small-scale and decentralized wastewater systems in Sweden for the past 25 years and for blackwater for pollution control even longer. The Swedish experience with source separating nutrient recycling systems is relatively well documented; however, few reports have specifically studied the potential for expansion of this practice. The aim of this study is to fill this knowledge gap by assessing the status of source-separating technologies in Sweden based on transition theory. This study uses a multi-level perspective to determine how ready the Swedish wastewater sector is for transitioning to alternative systems. Given the stability of the existing sewage wastewater regime, it seems unlikely that changes within the regime will lead to a quick and large-scale transition to source separation. Instead, the initiative must come from the niche itself, exploiting institutional cracks in the regime and opportunities from shifting trends in the landscape. If source separation is to be mainstreamed in Sweden, it will need to break into markets within the wastewater jurisdictions. In order to do so, further knowledge needs to be developed that will overcome glitches with immature technologies, uncertain legal conditions/status, investigate potential risks, and clearly define complementary system advantages. This may require the use of new perspectives that focus on holistic sustainable use of resources, including other nutrients than phosphorous, and taking into account global issues such as planetary boundaries and effects from climate change, such as water scarcity. This knowledge can then be used to establish guidelines, norms, and standards, as well as clarify the legislative structures that can support such a transition. There is also a strong need to improve knowledge dissemination regarding best-practices for implementing source-separation technologies and supporting organizational structures. Similarly, support for entrepreneurial activities within the niche needs to increase, not least through strengthening social networks and communication platforms.
|
|
| 10. |
- Mc Conville, Jennifer R, 1978, et al.
(författare)
-
Source separation : Challenges & opportunities for transition in the Swedish wastewater sector
- 2017
-
Ingår i: Resources, Conservation and Recycling. - : Elsevier BV. - 0921-3449 .- 1879-0658. ; 120, s. 144-156
-
Tidskriftsartikel (refereegranskat)abstract
- A paradigm shift to waste reuse has started in the wastewater sector with many experts calling for greater resource recovery, often facilitated by alternative solutions such as source separation. Source separation has been shown to be advantageous for improving treatment capacity, food security, and efficiency; yet these systems are still immature, considered risky by professionals and scarcely implemented. This study attempts to answer the question of why source separation is still marginalized by examining the Swedish experience with source separated wastewater from the perspective of Technology Innovation Systems (TIS) in order to identify obstacles and policy recommendations. Considering that source-separation is still in a development phase, the study found that source separation works moderately well within the on-site niche and that blackwater systems in general perform better than urine diversion. Knowledge development is found to be the weakest function. A major blocking mechanism is the weakness of interchange between knowledge development and entrepreneurial activity. Policy recommendations include: increased R&D; building networks and communication platforms; and establishing guidelines for technologies, legislation interpretation and organizational models.
|
|
