| 1. |
- Desivyana, Nindya, 1997, et al.
(författare)
-
Challenges in the adoption of sustainable criteria in the Swedish property development industry
- 2023
-
Ingår i: Procedia Computer Science. - : Elsevier BV. - 1877-0509. ; 219, s. 1752-1759
-
Konferensbidrag (refereegranskat)abstract
- The construction industry is facing an increased focus on sustainability and climate neutrality, causing property developers to implement new requirements into the procurement documents, which are also driven by the national agenda. This study explores the current state of sustainability practice among Swedish property developers and identifies the main obstacles to expand further the implementation of the sustainability criteria. How the property developers define and implement sustainability requirements has been assessed through qualitative semi-structured interviews, focusing on sustainability certification systems, Life Cycle Assessment (LCA), and social sustainability. The results show usage of sustainability certification systems for marketing purposes and high awareness and practice of LCA, even though the accuracy of LCA was questioned. This study also identified guideline gaps for circular economy and social sustainability measurements, which could relate to low initiatives from the certification systems.
|
|
| 2. |
- Femenias, Paula, 1966, et al.
(författare)
-
Från omfattande till varsam renovering
- 2019
-
Ingår i: Hållbar renovering ur ett helhetsperspektiv: En antologi från forskningsmiljön SIRen. - 9789188722652 ; , s. 47-54
-
Bokkapitel (övrigt vetenskapligt/konstnärligt)
|
|
| 3. |
|
|
| 4. |
- Rempling, Rasmus, 1976, et al.
(författare)
-
Utmattning
- 2021
-
Ingår i: Betonghandbok material - Hårdnad betong, fysikaliska egenskaper och beständighet. - 9789179170882 ; , s. 485-510
-
Bokkapitel (övrigt vetenskapligt/konstnärligt)
|
|
| 5. |
- Mathern, Alexandre, 1986
(författare)
-
Addressing the complexity of sustainability-driven structural design: Computational design, optimization, and decision making
- 2021
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Being one of the sectors with the largest environmental burden and high socio-economic impacts sets high requirements on the construction industry. At the same time, this provides the sector with great opportunities to contribute to the globally pursued sustainability transition. To cope with the increasing need for infrastructure and, at the same time, limit their sustainability impacts, changes and innovation in the construction sector are required. The greatest possibility to limit the sustainability impact of construction works is at the early design phase of construction projects, as many of the choices influencing sustainability are made at that point. Traditionally, an early choice of a preferred design is often made based on limited knowledge and past experience, considering only a handful of options. This preferred design is then taken on to the successive stages in the stepwise design process, leading to suboptimization. Alternatively, many different design choices could be considered and evaluated in a more holistic approach in order to find the most sustainable design for a particular application. However, finding design solutions that offer the best sustainability performance and fulfil all structural, performance and buildability requirements, require methods that allow considering different design options, analysing them, and assessing their sustainability. The aim of this thesis is to explore and develop methods enabling structural engineers to take sustainability objectives into account in the design of structures. Throughout this thesis, a number of methods have been explored to take sustainability aspects into account in the structural design process. As a first step, highly parameterized computer codes for sustainability-driven design have been developed. These codes interoperate with FE analysis software to automatically model and analyse design concepts over the whole design space and verify compliance with structural design standards. The codes were complemented with a harmonized method for life cycle sustainability performance assessment, in line with the state-of-the-art standards. Here, sustainability criteria were defined covering environmental, social, economic, buildability and structural performance for multi-criteria assessment of design concepts. To identify the most sustainable designs within the set, multi-objective optimization algorithms were used. Algorithms that address the high expense of constraint function evaluations of structural design problems were developed and integrated in the parameterized computer codes for sustainability-driven design. To ensure the applicability and validity of these methods, case studies based on real-world projects and common structural engineering problems were used in this thesis. Case studies for bridges and wind turbine foundations as well as a benchmark case of a reinforced concrete beam were investigated. The case studies highlight the potential of the methods explored to support the design of more sustainable structures, as well as the applicability of the methods in structural engineering practice. It is concluded that it is possible and beneficial to combine computational design, life cycle sustainability assessment, and multi-objective design optimization as a basis for decision making in the design phase of civil engineering projects. A wide adoption of such a sustainability-driven design optimization approach in structural engineering practice can directly improve the sustainability of the construction sector.
|
|
| 6. |
- Mathern, Alexandre, 1986, et al.
(författare)
-
Concrete Support Structures for Offshore Wind Turbines: Current Status, Challenges, and Future Trends
- 2021
-
Ingår i: Energies. - : MDPI AG. - 1996-1073 .- 1996-1073. ; 14:7
-
Forskningsöversikt (refereegranskat)abstract
- Today’s offshore wind turbine support structures market is largely dominated by steel structures, since steel monopiles account for the vast majority of installations in the last decade and new types of multi-leg steel structures have been developed in recent years. However, as wind turbines become bigger, and potential sites for offshore wind farms are located in ever deeper waters and ever further from the shore, the conditions for the design, transport, and installation of support structures are changing. In light of these facts, this paper identifies and categorizes the challenges and future trends related to the use of concrete for support structures of future offshore wind projects. To do so, recent advances and technologies still under development for both bottom-fixed and floating concrete support structures have been reviewed. It was found that these new developments meet the challenges associated with the use of concrete support structures, as they will allow the production costs to be lowered and transport and installation to be facilitated. New technologies for concrete support structures used at medium and great water depths are also being developed and are expected to become more common in future offshore wind installations. Therefore, the new developments identified in this paper show the likelihood of an increase in the use of concrete support structures in future offshore wind farms. These developments also indicate that the complexity of future support structures will increase due to the development of hybrid structures combining steel and concrete. These evolutions call for new knowledge and technical know-how in order to allow reliable structures to be built and risk-free offshore installation to be executed.
|
|
| 7. |
- Rempling, Rasmus, 1976, et al.
(författare)
-
Performance requirements for Swedish transport infrastructure - A pre-study of challenges and possibilities
- 2022
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- In recent years, significant worldwide research has been conducted regarding the performance assessment of bridges and the concept of performance indicator has been introduced However, there are still significant discrepancies in how these indicators are obtained and used. Simultaneously, it is desirable to achieve processes and methods that are direct, i.e. that measured values are directly compared with projected values over time. This project concerns methods for verification of technical performance requirements. The feasibility study brought together interdisciplinary researchers, consultants, and entrepreneurs to gather knowledge, anchor the research agenda, and implement performance requirements. The project concludes that there is a need for a “Holistic multi-parameter verification/validation system” that relies on the knowledge gained in structural health monitoring research.
|
|
| 8. |
- Säwén, Toivo, 1993
(författare)
-
Early Stage Architectural Design Practice Perspectives on Life Cycle Building Performance Assessment
- 2023
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Architectural practitioners can avoid negative social and environmental impacts of new construction by making decisions supported by impact quantification during design processes. However, most software tools developed for such quantification see little use in practice, especially in early design stages when decisions have the greatest influence. To identify ways for software developers to overcome this situation, a thorough literature meta-review of previously performed tool reviews was combined with interviews applying a practice lens. The first key finding is that a possible explanation for the low tool uptake in practice could be a missing practice perspective in previous tool development efforts. In a literature meta-review of publications on life cycle building performance tools identifying previously applied perspectives, most previous tool reviews were found to support tool development and selection, while disregarding how tools can be integrated in existing practices and design processes. As a proposed solution, a framework for defining software requirements using a practice perspective was developed. The second key finding is that a practice perspective could be applied during software development by implementing qualitative methodologies. Nine architectural practitioners in Sweden, Norway and France were interviewed using the interview to the double, a projective technique in which the interviewee is asked to describe their next workday in detail so that their tasks can be assumed by an imagined body double. The design activities described by the respondents were sequenced into user narratives which could serve as starting points for participatory software development processes within the architectural practice. The outcomes - a proposed framework for practice-centric software requirements, and a proposed methodology for collecting these requirements using a practice lens - indicate a research direction toward software development efforts which aligns with design process, architectural practice, and tool user needs. In the next stage of the research this direction will be pursued through application of the developed methodologies in participatory development case studies in early-stage architectural design practice.
|
|
| 9. |
- Adam, Abderisak, 1988, et al.
(författare)
-
How task heterogeneity and frequency relates to knowledge codification: Evaluating the Shared Construction Guidelines (SCG) of 24 Swedish Public Client Organizations
- 2017
-
Ingår i: 9th Nordic Conference on Construction Economics and Organization. ; , s. 1-9
-
Konferensbidrag (refereegranskat)abstract
- Over a sustained period of time, organizational theorists have argued that public sector organizationsare more inefficient than their private counterparts. Recent studies have explained these inefficienciesas the result of having to do with capabilities rather than resources thereby calling for an improvementof the capabilities of public organizations. A key mechanism for achieving such improvements is thearticulation and codification of knowledge. This study examines an attempt at codifying knowledge inthe form of a set of shared construction guidelines (SCG) employed by 24 large public clientorganizations in the Municipality of Gothenburg, Sweden. Specifically, these guidelines are viewedwith respect to the framework of Zollo and Winter (2002) in terms of how organizations with high taskheterogeneity and low task frequency can more effectively develop dynamic capabilities through thedeliberate learning mechanism of knowledge codification. Preliminary results indicate that taskfrequency and organizational size are stronger indicators than heterogeneity in deciding whether apublic client organization utilizes knowledge codification systems such as the SCG.
|
|
| 10. |
- Adam, Abderisak, 1988
(författare)
-
Managing construction challenges: Viability of a dynamic capabilities approach for the public client
- 2016
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Construction clients in the public sector face a large number of challenges in designing, procuring and managing construction projects in a manner that is conducive to the organization’s overall goals. In particular, clients have faced challenges in delivering projects that satisfied the projects’ goals with respect to cost overruns, delays and sustainable construction. The role of the client in managing these challenges has more recently been emphasized with a growing number of studies and governmental reports calling for the development of the client’s capabilities.This thesis examines the capabilities of the construction client through a dynamic capabilities framework, particularly with respect to the activities of sensing, seizing and transforming. Furthermore, the thesis explores whether the concept of dynamic capabilities is a viable approach for understanding how to manage the clients’ capabilities in a way that ensures that construction-related challenges are addressed. The thesis is based primarily on a case study of a large public construction client located in Sweden.Findings are presented in three appended papers. The thesis concludes with a discussion on the viability of using a dynamic capabilities framework in the specific case described in this thesis. It is argued that the concept of dynamic capabilities is inadequate for capturing the specific context in which public client organizations operate. Suggestions for alternative approaches to understanding the management and development of capabilities are then discussed.
|
|
