| 1. |
- Garmabaki, Amir H. Soleimani, et al.
(författare)
-
A Survey on Underground Pipelines and Railway Infrastructure at Cross-Sections
- 2019
-
Ingår i: Proceedings of the 29th European Safety and Reliability Conference (ESREL 2019). - Singapore : Research Publishing Services. ; , s. 1094-1101
-
Konferensbidrag (refereegranskat)abstract
- Underground pipelines are an essential part of the transportation infrastructure. The structural deterioration of pipelines crossing railways and their subsequent failures are critical for society and industry resulting in direct and indirect costs for all the related stakeholders. Pipeline failures are complex processes, which are affected by many factors, both static (e.g., pipe material, size, age, and soil type) and dynamic (e.g., traffic load, pressure zone changes, and environmental impacts). These failures have serious impacts on public due to safety, disruption of traffic, inconvenience to society, environmental impacts and shortage of resources. Therefore, continuous and accurate condition assessment is critical for the effective management and maintenance of pipeline networks within transportation infrastructure. The aim of this study is to identify failure modes and consequences related to the crossing of pipelines in railway corridors. Expert opinion have been collected through two set of questionnaires which have been distributed to the 291 municipalities in the whole Sweden. The failure analysis revealed that pipe deformation has higher impact followed by pipe rupture at cross-section with railway infrastructure. For underground pipeline under railway infrastructure, aging and external load gets higher ranks among different potential failure causes to the pipeline.
|
|
| 2. |
- Silva, Ingrid, et al.
(författare)
-
Assessment of internal erosion in the glacial till core of a Swedish dam
- 2017
-
Konferensbidrag (refereegranskat)abstract
- Zoned embankment dams are a common type of dam in Sweden consisting of an impermeable central glacial till core flanked by zones of filter materials and rockfill shoulders. Dams with internal unstable core material allow fine particles to be transported by seepage, which may result in leakage paths and pore-pressure variations. These last two conditions are signs of initiated internal erosion. However, the effectiveness of the filter zone determines if the internal erosion will continue or not. This paper presents the assessment of internal erosion susceptibility of the glacial till core of a hydropower dam located in northern Sweden. The dam has experienced historical damages mainly in the form of sinkhole and leakage related to internal erosion. The study includes the analysis of the particle size distribution of samples obtained from boreholes, as well as a comparison of the geotechnical properties of the core with the Swedish dam safety guidelines available both during the dam construction in 1958 and today. The capability of the filter to stop the erosion process is not investigated.The results show that a well designed and constructed dams can be affected by local layers of internally unstable (suffusive) material susceptible to internal erosion.The capability of the filter to stop the erosion process is not investigated.The results show that a well-designed and constructed dams can be affected by local layers of internally unstable (suffusive) material susceptible to internal erosion.
|
|
| 3. |
- Al-Jabban, Wathiq, et al.
(författare)
-
Stabilization of Clayey Silt Soil Using Small Amounts of Petrit T
- 2017
-
Ingår i: Engineering. - : Scientific Research Publishing. - 1947-3931 .- 1947-394X. ; 9:6, s. 540-562
-
Tidskriftsartikel (refereegranskat)abstract
- Effects of using small amounts of a Petrit T, a by-product of manufacture sponge iron, to modify clayey silt soil were investigated in this study. Petrit T was added at 2%, 4% and 7% of soil dry weight. A series of unconfined compressive strength tests, consistency limits tests and pH tests were conducted at 7, 14, 28, 60 and 90 days of curing periods to evaluate the physical and mechanical properties of treated soil. Results indicated improving in the unconfined compressive strength, stiffness and workability of treated soil directly after treatment and over time. Increasing in soil density and decreasing in water content were observed, with increasing Petrit T content and curing time. The pH value was immediately increasing after treatment and then gradually decreased over time. Failure mode gradually changed from plastic to brittle behavior with increasing binder content and curing time. The outcomes of this research show a promising way of using a new by-product binder to stabilize soft soils in various engineering projects in order to reduce the costs which are associated with of excavation and transportation works.
|
|
| 4. |
- Chabuk, Ali, et al.
(författare)
-
Soil Characteristics in Selected Landfill Sites in the Babylon Governorate, Iraq
- 2017
-
Ingår i: Journal of Civil Engineering and Architecture. - : David Publishing Company. - 1934-7359 .- 1934-7367. ; 11:4, s. 348-363
-
Tidskriftsartikel (refereegranskat)abstract
- The Babylon Governorate is situated in the middle of Iraq. It covers an area of 5,315 km2 and has 2,092,998 inhabitants distributed throughout its five major cities (Qadhaa). Presently, there is no landfill site in the governorate that meets the environmental criteria for the disposal of municipal and industrial waste. Consequently, GIS (geographic information system) and methods of multi-criteria decision making were used here to select the best sites in each city in the Babylon Governorate that would fulfil the environmental requirements. Two sites were chosen in each city. As the groundwater is very shallow in this area, the design should ensure against groundwater pollution by leachate from these sites. To avoid this problem, soil investigation was conducted at these sites so that the most suitable landfill design could be accomplished. The results of soil investigation in these sites include the soil profile, groundwater depth, chemical properties, allowable bearing capacity, Atterberg limits test results and material characteristics of the soil strata. From the research, it is believed that the best design is one that puts the landfill above ground.
|
|
| 5. |
- Sissakian, Varoujan K., et al.
(författare)
-
Defects in Foundation Design Due to Miss-Interpretation of the Geological Data : A Case Study of Mosul Dam
- 2017
-
Ingår i: Engineering. - : Scientific Research Publishing. - 1947-3931 .- 1947-394X. ; 9:7, s. 683-702
-
Tidskriftsartikel (refereegranskat)abstract
- Existing engineering problems in Mosul Dam and their background are discussed in this paper. A thorough review of the available geological reports was made. These reports covered many decades of investigations from 1953 up to the investigations performed during the construction of the dam. A large volume of geological information was accumulated during these investigations, but it is unfortunate to see that some of the basic facts were not interpreted correctly. This applies to the incorrect correlation of the encountered beds in the exploration boreholes and miss-understanding of the actual stratigraphic succession at the dam site. This misinterpretation contributed to misleading results regarding the true karst zones and the type of rocks and their thicknesses in the foundation zone and surrounding area. As a result, the dam was placed on problematic foundations consisting of brecciated and highly kartsified gypsum/anhydrite rocks and/or conglomerates in which gypsum forms the main constituent as cementing materials. Karstified beds were not recognized in some depths and were described as normal marl and/or breccias. This also added to the use of improper method of foundation treatment by adopting a deep grout curtain as the main anti-seepage measure instead of using a more positive measure by constructing a diaphragm wall. The mentioned misinterpretations are discussed here in details together with their consequences, and a more accurate picture of the geology is presented.
|
|
| 6. |
- Al-Madhlom, Qais, et al.
(författare)
-
Potential use of UTES in Babylon Governorate, Iraq
- 2020
-
Ingår i: Groundwater for Sustainable Development. - : Elsevier. - 2352-801X. ; 10
-
Tidskriftsartikel (refereegranskat)abstract
- There is a global attention that the future energy systems will be based on renewable energy like solar and wind. The large-scale utilization of renewables in space heating and cooling requires large Thermal Energy Storage TES to overcome the varying supply and demand. The process of producing the best Underground Thermal Energy Storage UTES system pass through two steps: first, finding the best type of UTES system, second, finding the best locations to install UTES system. Both of these two steps depend extremely on the site specific parameters such that the depth to the groundwater, transmissivity, type of soil, the depth to the bedrock, and seepage velocity. The purpose of this paper is to explain some of the site specific parameters that the type of UTES-system depends on and explain the suitable type of UTES systems. This study considers Babylon province (Iraq) as study area. This province has electricity deficiency due to Heating Ventilating and Air Conditioning HVAC applications. The methodology of this study includes reviewing the literature that consider the study area, and using Arc Map/GIS to visualize some of the in-site parameters. The results indicate that the best type of UTES system for the considered region is either aquifer or pit type, due to the type of the soil and the depth to the crystalline bedrock. The hydraulic conductivity and the seepage velocity in the considered region are (0.0023–2.5) m/d and (1.3 × 10−6 – 3.45 × 10−3) m/d respectively. These conditions satisfy the standards which regard aquifer type.
|
|
| 7. |
- Al-Madhlom, Qais, et al.
(författare)
-
Site Selection Criteria of UTES Systems in Hot Climate
- 2019
-
Ingår i: Proceedings of the XVII ECSMGE-2019. - Iceland : The Icelandic Geotechnical Society (IGS). ; , s. 1-8
-
Konferensbidrag (refereegranskat)abstract
- Underground Thermal Energy Storage UTES systems are widely used around the world. The reason is that UTES is essential in utilizing Renewable Energy sources (RE). The efficiency of the energy system relies strongly on the efficiency of the storage system. Therefore, in the installation of a hyper-energy system, a lot of attention is to be paid in improving the storage system. In order to design an efficient storage system, firstly, standard criteria are to be investigated. These explain the process of making high efficiency storage system that must be specified. The criteria, mainly, depends on: best type and best location. These two variables are in high interference with each other. The bond between the two variables is represented by the geological, hydrological, meteorological, soil, hydrogeological properties/factors of the site. These factors are specified by geo-energy mapping. Despite the importance of this type of mapping, there is no specific criteria/formula that defines the choice. This paper aims to: give a brief literature review for UTES systems (types, classification, advantages/disadvantages for each type, and examples of an installed system). In addition, some factors within geo-energy mapping are highlighted and standard criteria to achieve good storage system are suggested. The suggested criterion comprises a process to transfer the quantity values to quality values according to the expert opinion. The suggested criteria are defined through the following stages: selecting the best type of UTES systems according to hydro-geological in site conditions; using the analytical hierarchy process to rank the best location to install the storage system and then using ArcMap (GIS-Software) to provide representative results as maps. Karbala Province (Iraq) is the study area used here
|
|
| 8. |
- Al-Madhlom, Qais, et al.
(författare)
-
Site Selection of Aquifer Thermal Energy Storage Systems in Shallow Groundwater Conditions
- 2019
-
Ingår i: Water. - Switzerland : MDPI. - 2073-4441. ; 11:7
-
Tidskriftsartikel (refereegranskat)abstract
- Underground thermal energy storage (UTES) systems are widely used around the world, due to their relations to heating ventilating and air conditioning (HVAC) applications [1]. To achieve the required objectives of these systems, the best design of these systems should be accessed first. The process of determining the best design for any UTES system has two stages, the type selection stage and the site selection stage. In the type selection stage, the best sort of UTES system is determined. There are six kinds of UTES systems, they are: boreholes, aquifer, bit, tank, tubes in clay, and cavern [2–5]. The selection of a particular type depends on three groups of parameters. They are: Site specific, design, and operation parameters (Figure 1). Apart from site specific parameters, the other two types can be changed through the life time of the system. The site specific parameters, e.g., geological, hydrogeological, and metrological, cannot be changed during the service period of the ystem. Therefore, the design of the best type should depend, at first consideration, on site specific parameters.
|
|
| 9. |
- Bernander, Stig, et al.
(författare)
-
Progressive Landslide Analysis in Canadian Glacial Silty Clay in Churchill River
- 2017
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- The poster presents the risks for a progressive landslide in a natural dam. The stability will be critical when the water level is raised after the building of a hydro power plant, Bernander (2016), Dury (2017). The analysis is based on a finite difference method developed by Stig Bernander (2011), Bernander et al.(2016) The following issues will be discussed: - Material properties- Risk for liquefaction- Three possible failure surfaces: one horizontal, one inclined and one curved- Failure riska for different material propeties- The need to check the real properties of the soil
|
|
| 10. |
- Dury, Robin, 1994-, et al.
(författare)
-
Progressive Landslide Analysis with Bernander Finite Difference Method
- 2017
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- The poster presents a new Spreadsheet developed by Robin Dury (2017) to simplify the use of the Finite Difference Method developed by Stig Bernander et al (2011, 2016).It includes:- Material Properties- Finite Difference Method- Progressive failure process with five phses- Discussion- References
|
|
