| 1. |
|
|
| 2. |
|
|
| 3. |
|
|
| 4. |
- Hatem, Mohammed, et al.
(författare)
-
Design of concrete mixes by systematic steps and ANN
- 2012
-
Ingår i: Journal of Advanced Science and Engineering Research. - 2231-8844. ; 2:4, s. 232-251
-
Tidskriftsartikel (refereegranskat)abstract
- The current research caters for the possibility of arriving at a system for designing concrete mixeseasily using available materials locally by specified wide ranges of pre-requisites of three mainprescribed properties to cover a good variety of practical mixes, which are water, water-cement ratioand total aggregate-cement ratio. Using these three properties, a tri-linear form was constructed bygraphical technique manner based on absolute volume approach. This approach defines as asummation of absolute volume for each of these three materials individually water, cement andaggregate should be equal to the absolute volume of whole concrete mixture based on thesealtogether. A quad-form area which includes a wide range of mixes can be formed from thisrepresentation. This area should achieve all the prescribed properties aforementioned. Artificial neuralnetwork concept used in this study also to build easily and quickly system which can be translatedinto Excel sheet. This system predict proportions of concrete mixture and the compressive strengthusing the results designed by the quad-form area method in addition to the data from literature around500 mixes based on local materials used in Iraq. Six input parameters (water to cement ratio, theslump, % of fine to total aggregate content, maximum aggregate size, fineness modulus of fineaggregate and the compressive strength) were used in this system to get the outputs. In addition, nineinput parameters ((water, cement, sand and gravel contents) and the properties of the mix (Finenessmodulus, W/C ratio, the slump, % of fine to total aggregate and the M.A.S)) were used as basis ofcompressive strength model. The algorithm of this system aimed to reduce the high number of trailmixes error as well as saving the labors, cost and time. Results indicated that the concrete mix designand the compressive strength model can be predicted accurately by using graphical perspective andthe ANN approach.
|
|
| 5. |
- Hatem, Mohammed, et al.
(författare)
-
Performance of Cement-poor Concrete with Different Superplasticizers
- 2014
-
Ingår i: International Journal of Research and Reviews in Applied Sciences. - 2076-734X .- 2076-7366. ; 18:2, s. 163-172
-
Tidskriftsartikel (refereegranskat)abstract
- Concrete can be used for casting plugs in deep boreholes where fracture zones are intersected. They will be exposed to flowing groundwater and be in contact with very tight seals of smectite clay installed where the surrounding rock is tight. The cast concrete must be able to carry the clay segments placed over it after a few days. Its bearing capacity does not have to be very high after that since the clay soon adheres to the rock and carries itself. The concrete must be poor in cement for minimizing the risk of creation of voids caused by dissolution of the cement and it should have “inert” aggregate of quartz-rich material. Inorganic superplasticizers instead of conventional organic ones should be used for eliminating the risk of degradation and loss by formation of colloids that can carry radionuclides to the biosphere from holes bored in repository rock. The two concrete types discussed in the present study had Portland and Merit 5000 low pH cement as binders and crushed quartzite as aggregate. Talc mineral powder and ordinary organic Glenium 51 were used as superplasticizers for comparing their impact on the physical properties. The matrix of the cement-poor talc concrete gave ductile behaviour during initial hardening. The very dense matrix of either of the concretes would not lead to compression of the system even after complete loss of cement, which will happen over a longer period of time. The overall conclusion was that talc as superplasticizer and conditioner of the concrete can make the concrete sufficiently fluid for constructing seals at depth in boreholes, and react with cement to provide high strength with some delay. pH is much lower in Merit than in Portland concrete, which causes less impact on the clay seals. Portland concrete has five times higher strength than Merit concrete after a week but three times lower strength after 28 days.
|
|
| 6. |
- Hatem, Mohammed, et al.
(författare)
-
Proportioning of cement-based grout for sealing fractured rock-use of packing models
- 2013
-
Ingår i: Engineering. - : Scientific Research Publishing, Inc.. - 1947-3931 .- 1947-394X. ; 5:10, s. 765-774
-
Tidskriftsartikel (refereegranskat)abstract
- Fractured, very permeable rock hosting repositories for radioactive waste will require grouting. New grout types of possible use where long-term performance is needed should have a small amount of cement for minimizing the increase in porosity that will follow from the ultimate dissolution and erosion of this component. They have to be low-viscous and gain strength early after injection and packing theory can assist designers in selecting suitable proportions of various grout components. Optimum particle packing means that the porosity is at minimum and that the amount of cement paste needed to fill the voids between aggregate particles is very small. Low porosity and microstructural stability must be guaranteed for long periods of time. Organic additives for reaching high fluidity cannot be used since they can give off colloids that carry released radionuclides and talc can be an alternative superplasticizer. Low-pH cement reacts with talc to give high strength with time while Portland cement gives early but limited strengthening. The clay mineral palygorskite can be used for early gelation because of its thixotropic properties. Once forced into the rock fractures or channels in soil it stiffens and serves as a filter that prevents fine particles to migrate through it be lost. However, its hydrophilic potential is too high to give the grout a high density and high strength. According to the experiments carried out most of the investigated grouts are injectable in fractures with apertures down to 100 μm.
|
|
| 7. |
- Hatem, Mohammed, et al.
(författare)
-
Rheological properties of low pH cement-palygorskite injection grout
- 2013
-
Ingår i: Journal of Advanced Science and Engineering Research. - 2231-8844. ; 3:3, s. 167-192
-
Tidskriftsartikel (refereegranskat)abstract
- The rheological properties of cementitious materials containing fine particles, such as mineral admixture were investigated using a Viso Star-L rheometer with cylindrical spindles. Selected features of the behavior of these materials are evaluated from a rheological perspective through literatures results for the past 30 years. One of the important factors that governs the ability of grout to penetrate fractures, channels and porous material is the rheology. The mineral admixture was clay palygorskite which can be used for early gelation because of its thixotropic properties as well as the powder quartz used as aggregate. The cementitious materials were designed and three recipes (MPG1, MPG2 and MPG3) were examined in this research by changing the mix proportions of the mineral admixture palygorskite and water content. For ensuring the accuracy of rheological measurement for the candidate’s grouts, necessary verification was been evaluated such as, influence of mixing time, stability and “time effect” to the accuracy of viscosity measurement, and yield stress as well as the physical properties at 3, 7 and 28 days. The results showed that grouts recipes with quartzite aggregate of different granulometry, are chemically compatible and fulfill the requirement of containing no organic matter. Candidate’s grouts found to satisfy the stable sedimentation criteria with sedimentation rates less than 5% after 2 hours. Furthermore, it was found that the grout recipe 3 followed by 1 showed lower yield stress and plastic viscosity which are (0.1 Pa and 0.269 Pas) and (0.288 Pa and 0.531 Pas) respectively.
|
|
| 8. |
- Al-Gburi, Majid, et al.
(författare)
-
Effect of casting sequences on the restraint in slab-on-ground
- 2014
-
Konferensbidrag (refereegranskat)abstract
- One of the widespread issues in concrete structures is cracks occurring at early age. Cracks that appear in the young concrete may cause early start of corrosion of rebars or early penetration of harmful liquids or gases into the concrete body. These situations could result in reduced service life and in significantly increased maintenance cost of structures. Therefore it is important for construction companies to avoid these cracks. Restraint represents one of the main sources of thermal and shrinkage stresses at early age concrete. The casting sequence is affected by the restraint from adjacent structures. The present study discusses the influence of five casting sequences for the typical structure slab-on-ground. The aim is to map restraints for a number of possible casting sequences, and to identify the sequence with the lowest restraint. The study covers both continuous and jumped casting sequences, which include one, two and three contact edges. The result shows that the best casting sequence is the continuous technique with one contact edge.
|
|
| 9. |
- Al-Gburi, Majid, et al.
(författare)
-
Effect of the boundary conditions on the crack distribution in early age concrete
- 2014
-
Ingår i: Nordic Concrete Research. - 0800-6377. ; 50, s. 347-351
-
Tidskriftsartikel (refereegranskat)abstract
- Restrained movement in early age concrete may cause cracking. The boundary conditions – restraint – influence the possible crack distribution. This study aims at highlighting the effect of such restraint on the crack distribution. This is done by using the “Cracking Model for Concrete” in ABAQUS/Explicit simulating the non-linear behaviour under and after cracking. In the study the typical case wall-on-slab was in focus using a structure previously been tested in laboratory with both fixed and free bottom slab. The result of the modelling shows fairly good agreement with the cracks observed in the tests.
|
|
| 10. |
- Al-Gburi, Majid, et al.
(författare)
-
Prediction of Restraint in Second Cast Sections of Concrete Culverts using Artificial Neural Networks
- 2018
-
Ingår i: European Journal of Environmental and Civil Engineering. - : Taylor & Francis. - 1964-8189 .- 2116-7214. ; 22:2, s. 226-245
-
Tidskriftsartikel (refereegranskat)abstract
- Estimation of restraint is very important for accurately predicting the risk of early thermal and shrinkage cracking in concrete structures. The stress in young concrete is affected by changes in its dimensions during hydration and the restraint imposed by adjoining structures. In concrete culverts, the restraints from existing structures acting upon the first and second casting sections to be cast are different, causing them to exhibit different early cracking behaviour. This work presents a new method for predicting restraint in complex concrete structures using artificial neural networks (ANNs). Finite element calculations were performed to predict restraint in 108 slabs, 324 walls and 972 roofs from second sections of concrete culverts, and the results obtained were used to train and validate ANN models. The ANN models were then used to study the effects of varying selected parameters (the thickness and width of the roof and slab, the thickness and height of the walls, and the length of the culvert section) on the predicted restraint. Mathematical expressions for predicting restraint values in slabs, walls and roofs were derived based on the ANN models’ output and implemented in an Excel spreadsheet that provides a simple way of predicting restraint in practical applications. Restraint values predicted in this way agree well with the results of finite-element calculations
|
|
