| 1. |
|
|
| 2. |
- Brinck, Tore, et al.
(författare)
-
Green Energetic Materials, Chapter 2: "Theoretical Design of Green Energetic Materials: Predicting Stability, Detection, Synthesis and Performance"
- 2014
-
Ingår i: Green Energetic Materials. - 9781119941293 ; , s. 15-44
-
Bokkapitel (övrigt vetenskapligt/konstnärligt)abstract
- Since the end of the 20th century it has been increasingly realised that the use, or production, of many energetic materials leads to the release of substances which are harmful to both humans and the environment. To address this, the principles of green chemistry can be applied to the design of new products and their manufacturing processes, to create green energetic materials that are virtually free of environmental hazards and toxicity issues during manufacturing, storage, use and disposal. Active research is underway to develop new ingredients and formulations, green synthetic methods and non-polluting manufacturing processes.Green Energetic Materials provides a detailed account of the most recent research and developments in the field, including green pyrotechnics, explosives and propellants. From theoretical modelling and design of new materials, to the development of sustainable manufacturing processes, this book addresses materials already on the production line, as well as considering future developments in this evolving field.Topics covered include:Theoretical design of green energetic materialsDevelopment of green pyrotechnicsGreen primary and secondary explosivesOxidisers and binder materials for green propellantsEnvironmentally sustainable manufacturing technologies for energetic materialsElectrochemical methods for synthesis of energetic materials and waste remediationGreen Energetic Materials is a valuable resource for academic, industrial and governmental researchers working on the development of energetic materials, for both military and civilian applications.
|
|
| 3. |
- Brinck, T, et al.
(författare)
-
Green Energetic Materials, Chapter 7: "Green propellants Based on Dinitramide Salts: Mastering Stability and Chemical Compatibility Issues"
- 2014
-
Ingår i: Green Energetic Materials, kapitel 7. - 9781119941293 ; , s. 179-204
-
Bokkapitel (övrigt vetenskapligt/konstnärligt)abstract
- Since the end of the 20th century it has been increasingly realised that the use, or production, of many energetic materials leads to the release of substances which are harmful to both humans and the environment. To address this, the principles of green chemistry can be applied to the design of new products and their manufacturing processes, to create green energetic materials that are virtually free of environmental hazards and toxicity issues during manufacturing, storage, use and disposal. Active research is underway to develop new ingredients and formulations, green synthetic methods and non-polluting manufacturing processes.Green Energetic Materials provides a detailed account of the most recent research and developments in the field, including green pyrotechnics, explosives and propellants. From theoretical modelling and design of new materials, to the development of sustainable manufacturing processes, this book addresses materials already on the production line, as well as considering future developments in this evolving field.Topics covered include:Theoretical design of green energetic materialsDevelopment of green pyrotechnicsGreen primary and secondary explosivesOxidisers and binder materials for green propellantsEnvironmentally sustainable manufacturing technologies for energetic materialsElectrochemical methods for synthesis of energetic materials and waste remediationGreen Energetic Materials is a valuable resource for academic, industrial and governmental researchers working on the development of energetic materials, for both military and civilian applications.
|
|
| 4. |
- Moth-Poulsen, Kasper, 1978
(författare)
-
Molecular Systems for Solar Thermal Energy Storage and Conversion
- 2013
-
Ingår i: Organic Synthesis and Molecular Engineering. - Hoboken, NJ, USA : John Wiley & Sons, Inc.. ; , s. 179-196
-
Bokkapitel (övrigt vetenskapligt/konstnärligt)abstract
- Using a synthetic approach to organic materials chemistry, this book sets forth tested and proven methods and practices that make it possible to engineer organic molecules offering special properties and functions. Throughout the book, plenty of real-world examples demonstrate the countless possibilities of creating one-of-a-kind molecules and supramolecular systems to support a broad range of applications. The book explores applications in both materials and bioorganic chemistry, including molecular electronics, energy storage, sensors, nanomedicine, and enzyme engineering.Organic Synthesis and Molecular Engineering consists of fourteen chapters, each one contributed by one or more leading international experts in the field. The contributions are based on a thorough review and analysis of the current literature as well as the authors' firsthand experience in the lab engineering new organic molecules. Designed as a practical lab reference, the book offers:Tested and proven synthetic approaches to organic materials chemistryMethods and practices to successfully engineer functionality into organic moleculesExplanations of the principles and concepts underlying self-assembly and supramolecular chemistryGuidance in selecting appropriate structural units used in the design and synthesis of functional molecules and materialsCoverage of the full range of applications in materials and bioorganic chemistryA full chapter on graphene, a new topic generating intense researchOrganic Synthesis and Molecular Engineering begins with core concepts, molecular building blocks, and synthetic tools. Next, it explores molecular electronics, supramolecular chemistry and self-assembly, graphene, and photoresponsive materials engineering. In short, it offers everything researchers need to fully grasp the underlying theory and then build new molecules and supramolecular systems.
|
|
| 5. |
- Rahm, Martin, et al.
(författare)
-
The Molecular Surface Structure of Ammonium and Potassium Dinitramide : A Vibrational Sum Frequency Spectroscopy and Quantum Chemical Study
- 2011
-
Ingår i: The Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 115:21, s. 10588-10596
-
Tidskriftsartikel (refereegranskat)abstract
- Vibrational sum frequency spectroscopy (VSFS) and quantum chemical modeling have been employed to investigate the molecular surface structure of ammonium and potassium dinitramide (ADN and KDN) crystals. Identification of key vibrational modes was made possible by performing density functional theory calculations of molecular clusters. The surface of KDN was found to be partly covered with a thin layer of the decomposition product KNO3, which due to its low thickness was not detectable by infrared and Raman spectroscopy. In contrast, ADN exhibited an extremely inhomogeneous surface, on which polarized dinitramide anions were present, possibly together with a thin layer of NH4NO3. The intertwined use of theoretical and experimental tools proved indispensable in the analysis of these complex surfaces. The experimental verification of polarized and destabilized dinitramide anions stresses the importance of designing surface-active polymer support, stabilizers, and/or coating agents, in order to enable environmentally friendly ADN-based solid-rocket propulsion.
|
|
| 6. |
- Börjesson, Karl, 1982, et al.
(författare)
-
Conjugated anthracene dendrimers with monomer-like fluorescence
- 2014
-
Ingår i: RSC Advances. - : Royal Society of Chemistry (RSC). - 2046-2069. ; 4:38, s. 19846-19850
-
Tidskriftsartikel (refereegranskat)abstract
- Two generations of highly emissive conjugated anthracene dendrimers containing up to 9 anthracene units are presented. In these dendrimers, anthracene-like absorption and emission properties are preserved due to the relatively weak electronic coupling between the anthracene units, while evidence of fast crosstalk within the molecular framework is still observed.
|
|
| 7. |
- Kosaraju, Sravya, 1983
(författare)
-
A review of the importance of recycling lithium-ion batteries for lithium, in view of impending electric vehicle industry
- 2012
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- Automobile electrification is one the technological developments, that will commence an earth friendly transport system, by mitigating emissions and hopefully lead to a less fossil fuel dependent society. With commercial success attained by models like Nissan’s leaf and Chevy’s Volt, the consumer market looks promising to assimilate vehicle electrification. At present these technologies include HEVs (hybrid electric vehicles), PHEVs (plug-in hybrid electric vehicles), EVs (complete electric vehicles).A closer look at these technologies will lead us to one of the crucial components of electric vehicles, the “batteries”. This component decides one of the key performance factors which is the energy storage and usage, which means it is the basis for public acceptability.The lithium-ion battery chemistries are chosen to fulfill this requirement. Although lithium constitutes of a small fraction of the complete battery weight, still its contin-ued availability in future is debated among many resource analysts.
|
|
| 8. |
- Tehrani, Ali, 1976, et al.
(författare)
-
Solubilization of hydrophobic dyes in surfactant solutions
- 2013
-
Ingår i: Materials. - : MDPI AG. - 1996-1944. ; 6:2, s. 580-608
-
Forskningsöversikt (refereegranskat)abstract
- In this paper, the use of surfactants for solubilization of hydrophobic organic dyes (mainly solvent and disperse dyes) has been reviewed. The effect of parameters such as the chemical structures of the surfactant and the dye, addition of salt and of polyelectrolytes, pH, and temperature on dye solubilization has been discussed. Surfactant self-assemble into micelles in aqueous solution and below the concentration where this occurs-the critical micelle concentration (CMC)-there is no solubilization. Above the CMC, the amount of solubilized dye increases linearly with the increase in surfactant concentration. It is demonstrated that different surfactants work best for different dyes. In general, nonionic surfactants have higher solubilization power than anionic and cationic surfactants. It is likely that the reason for the good performance of nonionic surfactants is that they allow dyes to be accommodated not only in the inner, hydrocarbon part of the micelle but also in the headgroup shell. It is demonstrated that the location of a dye in a surfactant micelle can be assessed from the absorption spectrum of the dye-containing micellar solution.
|
|
| 9. |
- Busch, Michael, 1983, et al.
(författare)
-
Water Oxidation on MnOx and IrOx: Why Similar Performance?
- 2013
-
Ingår i: Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 117:1, s. 288-292
-
Tidskriftsartikel (refereegranskat)abstract
- The critical steps in water oxidation at a binuclear Mn(II–IV) oxide site are revisited. Ideal stabilities of intermediates are confirmed by comparing to results for a binuclear Ir(III–V) system. The latter in turn is known to be an excellent water oxidation catalyst. The inefficiency of the binuclear Mn(II–IV) site is owing to the high activation energy for the chemical step whereby MnIV═O double bonds on adjacent sites are broken prior to forming the MnIII—O—O—MnIII peroxy moiety. A rationale for Mn(II–IV)—Mn(III–V) mixed oxidation state for water oxidation catalysis, analogous to mixed transition metal oxide systems, is offered. Possible virtues of the kinetic stability of the binuclear MnIV═O moiety are discussed, utilizing its oxidizing power by sidestepping oxygen evolution.
|
|
| 10. |
- Pogorilyi, Roman, et al.
(författare)
-
New product from old reaction : uniform magnetite nanoparticles from iron-mediated synthesis of alkali iodides and their protection from leaching in acidic media
- 2014
-
Ingår i: RSC Advances. - : Royal Society of Chemistry (RSC). - 2046-2069. ; 4:43, s. 22606-22612
-
Tidskriftsartikel (refereegranskat)abstract
- Iron-mediated synthesis of alkali metal iodides was quite unexpectedly demonstrated to be able to serve as a cost-efficient and reliable source of spherical single crystalline near-stoichiometric magnetite (Fe3O4) nanoparticles as revealed by TEM and XRD studies and also by XANES spectroscopic quantification of the Fe2+-content. Using the particles as nuclei for the Stoeber synthesis of silica nanoparticles, core-shell magnetic material has been produced. The nature of the magnetic component was probed by XANES spectroscopy. The size of the particles is dependent on the synthesis conditions and Si : Fe ratio but can be kept below 100 nm. It is the Si : Fe ratio that determines the stability of the particles in acidic medium. The latter was investigated spectrophotometrically as leaching of Fe3+-cations. Considerable stability was observed at Si : Fe > 10, while at Si : Fe >= 20 no measurable leaching could be observed in over 10 days. Magnetic nanoparticles with improved stability in acidic medium provide an attractive basis for creation of adsorbent materials for applications in harsh media.
|
|
