The effect of SLM parameters on geometrical characteristics of open porous NiTi scaffolds

• Selective Laser Melting (SLM) is a promising technique for the production of biometallic scaffolds for orthopaedic applications. To produce successful scaffolds, the laser parameters should be carefully selected in order to achieve open porosity especially when pores are <1000 μm. In this study, we investigate the effect of different laser parameters (capable to produce dense bulk NiTi samples) on production of scaffolds with open porosities of 1000 μm and varying strut thicknesses 100-300 μm. Two different sets of laser parameters were used: 40W laser power with 160 mm/s scanning velocity and 250W with 1000 mm/s, corresponding to low and high laser parameters respectively. Micro-CT scanning experiments were carried out to illustrate the limitations of laser parameters in production of open porous scaffolds. Volume fraction and closed porosity were assessed. It was found that a large CAD mismatch was observed in the building (XZ) direction and internal porosity appears within struts of the samples produced with high laser processing parameters. The residual particles on struts were also shown to increase as strut thickness increases.

Ämnesord

TEKNIK OCH TEKNOLOGIER  -- Materialteknik -- Bearbetnings-, yt- och fogningsteknik (hsv//swe)

ENGINEERING AND TECHNOLOGY  -- Materials Engineering -- Manufacturing, Surface and Joining Technology (hsv//eng)

Publikations- och innehållstyp

ref (ämneskategori)

kon (ämneskategori)