Control of HCCI During Engine Transients by aid of Variable Valve Timings Through the use of Model Based Non-Linear Compensation

• One of the main challenges with the Homogeneous Charge Compression Ignition, HCCI, combustion system is to control the Start Of Combustion, SOC, for varying load and external conditions. A method to achieve this on a cycle-by-cycle basis is to vary the valve timing based on a feedback signal from the SOC of previous cycles. The control can be achieved with two basic valve-timing strategies named the Overlap- and the IVC-method. The Overlap-method works by trapping of residuals while the IVC-method affects the effective compression ratio. In an earlier paper it has been shown that if the two methods are incorporated into one controller, SOC can be controlled in a relatively large operating window although the transient performance was not sufficient. The reason is that the simple PI-controller cannot be made fast enough to cope with the transients without magnifying the cycle-to-cycle variations of the combustion into instability. In this work a model based control system that features a non-linear compensation, based on the inverse of the non-linear function from valve timings to ignition delay, is suggested and evaluated. The results show good transient performance. Control performance from engine tests is reported. A combined engine and control simulation system is used for the development of the control strategies. The simulations are accomplished with a commercial cycle simulation code linked with a commercial control simulation code. The simulations are iteratively verified against engine test data. Engine tests are conducted on a single cylinder engine equipped with a hydraulic valve system.

Nyckelord

TECHNOLOGY

TEKNIKVETENSKAP

Publikations- och innehållstyp

ref (ämneskategori)

art (ämneskategori)