SwePub
Sök i LIBRIS databas

  Utökad sökning

id:"swepub:oai:DiVA.org:lnu-77974"
 

Sökning: id:"swepub:oai:DiVA.org:lnu-77974" > Bending properties ...

Bending properties and strain fields around knots in thermally modified timber

van Blokland, Joran (författare)
Linnéuniversitetet,Institutionen för skog och träteknik (SOT)
Adamopoulos, Stergios (författare)
Linnéuniversitetet,Institutionen för skog och träteknik (SOT),GoFP
Olsson, Anders, 1973- (författare)
Linnéuniversitetet,Institutionen för byggteknik (BY)
visa fler...
Oscarsson, Jan, 1958- (författare)
Linnéuniversitetet,Institutionen för byggteknik (BY)
visa färre...
 (creator_code:org_t)
2018
2018
Engelska.
  • Konferensbidrag (refereegranskat)
Abstract Ämnesord
Stäng  
  • Thirty-two (32) boards of Norway spruce with cross-sectional dimensions of 145×45 mm2 were first tested non-destructively in a four-point static bending test, were then thermally modified according to the ThermoWood® process, and were finally tested destructively in the mentioned test set up. For one of these boards, the 2D strain fields occurring due to pure bending were recorded, both before and after thermal modification, over the surface of a knotty part of the board using a non-contact optical deformation measurement system. The objectives were to get more insight into the static bending behaviour of thermally modified timber (TMT), specifically with regard to the local and global modulus of elasticity (MOE) and their respective relationship to bending strength, and the strain development around a cluster of knots. The bending strength was significantly reduced by thermal treatment, whereas the effect on the MOEs was limited. Linear regression analyses demonstrated that bending strength of TMT can be predicted by employing stiffness as indicating property. Strain field measurements showed that at the examined levels of loading the quantity and distribution of strains in a knotty area were not influenced by thermal modification. It was therefore suggested that the influence of thermal modification on global stiffness, as well as on local stiffness around knots, is limited.

Ämnesord

LANTBRUKSVETENSKAPER  -- Lantbruksvetenskap, skogsbruk och fiske -- Trävetenskap (hsv//swe)
AGRICULTURAL SCIENCES  -- Agriculture, Forestry and Fisheries -- Wood Science (hsv//eng)
TEKNIK OCH TEKNOLOGIER  -- Samhällsbyggnadsteknik -- Husbyggnad (hsv//swe)
ENGINEERING AND TECHNOLOGY  -- Civil Engineering -- Building Technologies (hsv//eng)

Nyckelord

four-point bending
modulus of elasticity
Norway spruce
strain measurement
strength prediction
ThermoWood®
Forestry and Wood Technology
Skog och träteknik

Publikations- och innehållstyp

ref (ämneskategori)
kon (ämneskategori)

Till lärosätets databas

Sök utanför SwePub

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

 
pil uppåt Stäng

Kopiera och spara länken för att återkomma till aktuell vy