Sökning: id:"swepub:oai:DiVA.org:lnu-80374" >
Prediction of bendi...
Prediction of bending strength of thermally modified timber using high-resolution scanning of fibre direction
-
- van Blokland, Joran (författare)
- Linnéuniversitetet,Institutionen för skog och träteknik (SOT),GoFP
-
- Olsson, Anders, 1973- (författare)
- Linnéuniversitetet,Institutionen för byggteknik (BY)
-
- Oscarsson, Jan, 1958- (författare)
- Linnéuniversitetet,Institutionen för byggteknik (BY)
-
visa fler...
-
- Adamopoulos, Stergios (författare)
- Linnéuniversitetet,Institutionen för skog och träteknik (SOT),GoFP
-
visa färre...
-
(creator_code:org_t)
- 2019-02-07
- 2019
- Engelska.
-
Ingår i: European Journal of Wood and Wood Products. - : Springer. - 0018-3768 .- 1436-736X. ; 77:3, s. 327-340
- Relaterad länk:
-
https://doi.org/10.1...
-
visa fler...
-
https://lnu.diva-por... (primary) (Raw object)
-
https://link.springe...
-
https://urn.kb.se/re...
-
https://doi.org/10.1...
-
visa färre...
Abstract
Ämnesord
Stäng
- The market share of thermally modified wood (TMW) has increased in Europe during the past few years as an environmentally friendly and durable building product. However, TMW products of today are not permitted for use in structural applications, because the reduction in strength that is caused by thermal treatment cannot be accounted for. The purpose of this paper was to investigate the bending properties of thermally modified timber (TMT) of Norway spruce, and to explore possibilities to predict the bending properties of TMT. A sample of 100 boards from a 2X-log sawing pattern of 100 logs was thermally modified according to the ThermoWood® process, while the mirror 100 boards served as an unmodified control sample. Two non-destructive methods were employed: (1) a novel method based on scanning of fibre directions to obtain the lowest edgewise bending modulus of elasticity (MOE) along a board, and (2) a conventional excitation method to determine the first axial resonance frequency used to calculate the axial dynamic MOE. Finally, the boards were bent to failure according to European standard EN 408. Despite the fact that bending strength was reduced by 42% due to thermal treatment, the type and location of failure in TMT remained related to the presence of knots. Prediction of bending strength based on local fibre direction and axial dynamic MOE, gave coefficients of determination of 0.51 for the thermally modified boards and 0.69 for the control boards, whereas axial dynamic MOE alone gave 0.46 and 0.57, respectively. These results indicate that although Norway spruce TMT has lower bending strength compared to unmodified timber, predictions of the bending strength can be made with good accuracy.
Ämnesord
- TEKNIK OCH TEKNOLOGIER -- Samhällsbyggnadsteknik -- Husbyggnad (hsv//swe)
- ENGINEERING AND TECHNOLOGY -- Civil Engineering -- Building Technologies (hsv//eng)
- LANTBRUKSVETENSKAPER -- Lantbruksvetenskap, skogsbruk och fiske -- Trävetenskap (hsv//swe)
- AGRICULTURAL SCIENCES -- Agriculture, Forestry and Fisheries -- Wood Science (hsv//eng)
Nyckelord
- axial dynamic excitation
- fibre angle
- four-point bending
- grade determining properties
- machine strength grading
- ThermoWood®
- tracheid effect
- Forestry and Wood Technology
- Skog och träteknik
Publikations- och innehållstyp
- ref (ämneskategori)
- art (ämneskategori)
Hitta via bibliotek
Till lärosätets databas