Copper and Silver Metallization for High Temperature Applications

• High-temperature electrical- and morphological-stability of interconnect is critical for electronic systems based on wide band gap (WBG) semiconductors. In this context, the thermal stability of both Ag and Cu films with Ta and TaN films as diffusion barriers and/or surface-capping layers at high temperatures up to 800 oC is investigated in this thesis.The investigation of un-capped Ag films with either Ta or TaN diffusion barrier layers shows electrical stability upon annealing up to 600 °C. Degradation occurs above 600 °C mainly as a result of void formation and Ag agglomeration. Sandwiching Ag films between Ta and/or TaN layers is found to electrically and morphologically stabilize the Ag metallization up to 800 °C. The barrier layer plays a key role; the β-to-α phase transition in the underlying Ta barrier layer is identified as the major cause for the morphological instability of the film above 600 °C. This phase transition can be avoided using a stacked Ta/TaN barrier. Furthermore, no observable Ta diffusion in Ag films is found.Copper films with a Ta diffusion barrier show clearly different behaviors. In the Cu/Ta sample, Ta starts to diffuse up to the surface via fast-diffusing grain boundaries (GBs) after annealing at 500 °C. The activation energy for the GB diffusion is 1.0+0.3 eV. Un-capped Cu is electrically stable up to 800 °C. An appreciable increase in sheet resistance occurs above 600 °C for the asymmetric combinations Ta/Cu/TaN and TaN/Cu/Ta. This degradation is closely related to a substantial diffusion of Ta across the Cu film and on to the TaN layer, where Ta1+xN forms. The symmetrical combinations Ta/Cu/Ta and TaN/Cu/TaN show only small changes in sheet resistance even after annealing at 800 °C. No Ta diffusion can be found in the Ta/Cu/Ta and TaN/Cu/TaN stacks.Finally, the influence of barrier and cap, their interfaces to Cu and Ta diffusion and segregation in the Cu GBs on electromigration is studied. Our preliminary results with the TaN/Cu/Ta and TaN/Cu/TaN structures report a 2-fold higher activation energy and a 10-fold longer lifetime for the former, thus confirming an important role of the interface between Cu and the cap and/or barrier.

Ämnesord

TEKNIK OCH TEKNOLOGIER  -- Elektroteknik och elektronik -- Annan elektroteknik och elektronik (hsv//swe)

ENGINEERING AND TECHNOLOGY  -- Electrical Engineering, Electronic Engineering, Information Engineering -- Other Electrical Engineering, Electronic Engineering, Information Engineering (hsv//eng)

Nyckelord

Metallization

Copper

Silver

Tantalum

High tempreture

Diffussion

Electromigration

Stability

Publikations- och innehållstyp

vet (ämneskategori)

dok (ämneskategori)