Sökning: id:"swepub:oai:research.chalmers.se:70d52208-79df-4a81-822a-637fb4e17085" >
High Strain Rate Su...
High Strain Rate Superplastic Flow and Fracture Characteristics of a Fine-Grained Eutectic High Entropy Alloy
-
- Reddy, S. R. (författare)
- Indian Institute of Technology
-
- Li, Xiaolong, 1991 (författare)
- Chalmers tekniska högskola,Chalmers University of Technology
-
- Guo, Sheng, 1981 (författare)
- Chalmers tekniska högskola,Chalmers University of Technology
-
visa fler...
-
- Bhattacharjee, Pinaki Prasad (författare)
- Indian Institute of Technology
-
- Chokshi, A. H. (författare)
- Indian Institute of Science
-
visa färre...
-
(creator_code:org_t)
- 2024
- 2024
- Engelska.
-
Ingår i: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. - 1073-5623. ; 55, s. 173-182
- Relaterad länk:
-
https://doi.org/10.1...
-
visa fler...
-
https://research.cha...
-
visa färre...
Abstract
Ämnesord
Stäng
- A fine-grained micro-duplex AlCoCrFeNi2.1 eutectic high entropy alloy exhibited high strain rate superplasticity with an elongation to failure of ~ 960 pct at 1173 K and a strain rate of 10-1 s-1. Optimum superplasticity was associated with a strain rate sensitivity of ~ 0.5, and there were transitions to non-superplastic flow with strain rate sensitivities of < 0.5 at both low and high strain rates. Superplasticity is attributed to grain boundary sliding with the observed retention of an equiaxed grain morphology, with some grain growth. Cavities with dimensions in the range of 1 to 5 μm were observed in specimens pulled to failure. Although analysis revealed that cavity nucleation is likely under the experimental conditions, cavity growth was slow because of control by a plasticity growth rate that was proportional to the cavity size. Graphical Abstract: [Figure not available: see fulltext.]
Ämnesord
- TEKNIK OCH TEKNOLOGIER -- Materialteknik -- Bearbetnings-, yt- och fogningsteknik (hsv//swe)
- ENGINEERING AND TECHNOLOGY -- Materials Engineering -- Manufacturing, Surface and Joining Technology (hsv//eng)
- TEKNIK OCH TEKNOLOGIER -- Materialteknik -- Metallurgi och metalliska material (hsv//swe)
- ENGINEERING AND TECHNOLOGY -- Materials Engineering -- Metallurgy and Metallic Materials (hsv//eng)
Publikations- och innehållstyp
- art (ämneskategori)
- ref (ämneskategori)
Hitta via bibliotek
Till lärosätets databas