Water-assisted extrusion and injection moulding of composites with surface-grafted cellulose nanocrystals – An upscaling study

• The large-scale surface modification of cellulose nanocrystals (CNC) was carried out to produce CNC-containing composites, in a scale of 3 kg, using industrial-scale melt processing techniques such as twin-screw extrusion and injection moulding. Two different polymer matrices, ethylene-acrylic acid copolymer (EAA) and low-density polyethylene (LDPE), were reinforced with 10 wt% unmodified cellulose nanocrystals (CNC) or surface-treated CNC, where a 2-hydroxyproyl-N-diallyl group had been grafted onto the sulphate half-ester groups on the CNC surfaces. This was achieved by mixing an aqueous CNC dispersion and the polymer pellets directly in the twin-screw extruder followed by a second dry compounding step prior to shaping by injection moulding. The injection-moulded materials were characterized with respect to their mechanical properties and thermal stability. The addition of 10 wt % CNC resulted in all cases in an increase in the yield strength and stiffness by 50–100%, most significantly for the EAA based composites. There were indications of the presence of a stable interphase and a percolating network in the EAA-based materials, according to dynamic-mechanical measurements. A reduction in thermal stability was observed for the melt-processed samples containing diallyl-modified CNC and discoloration in the EAA based samples.

Ämnesord

NATURVETENSKAP  -- Kemi -- Materialkemi (hsv//swe)

NATURAL SCIENCES  -- Chemical Sciences -- Materials Chemistry (hsv//eng)

TEKNIK OCH TEKNOLOGIER  -- Materialteknik -- Kompositmaterial och -teknik (hsv//swe)

ENGINEERING AND TECHNOLOGY  -- Materials Engineering -- Composite Science and Engineering (hsv//eng)

Nyckelord

Extrusion

Injection moulding

Cellulose nanocrystals

Mechanical properties

Publikations- och innehållstyp

art (ämneskategori)

ref (ämneskategori)