Effect of pH on Kraft Lignin Depolymerisation in Subcritical Water

• Softwood kraft lignin was depolymerized using subcritical water (623 K and 25 MPa) in a continuous small pilot unit. ZrO2 and K2CO3 were used as catalysts, and phenol was used as capping agent to suppress repolymerization. The effect of pH was investigated by adding KOH in five steps to the feed. The yield of water-soluble organics increased with pH. The yield of bio-oil was also influenced by the pH and varied between 28 and 32 wt %. The char yield on the zirconia catalyst showed a minimum at pH 8.1. The yield of suspended solids was low at pH below 8.1 but increased at higher pH values. The oxygen content in the bio-oil was only 15 wt %, compared to about 26 wt % in the kraft lignin.

Ämnesord

TEKNIK OCH TEKNOLOGIER  -- Kemiteknik (hsv//swe)

ENGINEERING AND TECHNOLOGY  -- Chemical Engineering (hsv//eng)

Nyckelord

chemicals

hydrogen

supercritical water

Engineering

catalytic depolymerization

ethanol

pyrolysis

degradation

near-critical water

alkali lignin

Energy & Fuels

conversion

Publikations- och innehållstyp

art (ämneskategori)

ref (ämneskategori)