| 1. |
- Hagman, Anton, 1984-
(författare)
-
Influence of inhomogeneities on the tensile and compressive mechanical properties of paperboard
- 2016
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The in-plane properties of paperboard have always been of interest to paper scientists. Tensile properties are crucial when the board is fed through converting machines at high speeds. Compressive properties are essential in the later use. Inhomogeneities affect both the compressive and tensile properties. For the tensile properties, it is the inherent heterogeneity of the paperboard that might cause problems for the board-maker. Varying material properties, through the thickness of the paperboard, are on the other hand used to achieve high bending stiffness with low fiber usage. It is of interest to know how this practice affects the local compressive properties. Papers A and B aims to address this, while C, D and E focus on in-plane heterogeneities. Paper A investigates the mechanism that causes failure in the short span compression test (SCT). It was concluded that the main mechanism for failure in SCT is delamination due to shear damage. In paper B the effect of the through-thickness profiles on the local compression strength was examined. It was concluded that the local compression is governed by in-plane stiffness and through thickness delamination. The latter was in turn dependent on the local shear strength and in-plane stiffness gradients. In paper C the tensile test is investigated with focus on sample size and strain distributions. The strain behavior was dependent on the length to width ratio of the sample and was caused by activation of local zones with high strainability. Paper D focuses on the strain zones seen in C. The thermal response in paper was studied. It was observed that an inhomogeneous deformation pattern arose in the paper samples during tensile testing. It was concluded that the heat patterns observed coincided with the deformation patterns. It could be shown that the formation was the cause of the inhomogeneous deformation. In final paper, E, the virtual field method was applied on data from C.
|
|
