| 1. |
- Dulio, Valeria, et al.
(författare)
-
The NORMAN Association and the European Partnership for Chemicals Risk Assessment (PARC) : let’s cooperate!
- 2020
-
Ingår i: Environmental Sciences Europe. - : Springer. - 2190-4707 .- 2190-4715. ; 32:1
-
Tidskriftsartikel (refereegranskat)abstract
- The Partnership for Chemicals Risk Assessment (PARC) is currently under development as a joint research and innovation programme to strengthen the scientific basis for chemical risk assessment in the EU. The plan is to bring chemical risk assessors and managers together with scientists to accelerate method development and the production of necessary data and knowledge, and to facilitate the transition to next-generation evidence-based risk assessment, a non-toxic environment and the European Green Deal. The NORMAN Network is an independent, well-established and competent network of more than 80 organisations in the field of emerging substances and has enormous potential to contribute to the implementation of the PARC partnership. NORMAN stands ready to provide expert advice to PARC, drawing on its long experience in the development, harmonisation and testing of advanced tools in relation to chemicals of emerging concern and in support of a European Early Warning System to unravel the risks of contaminants of emerging concern (CECs) and close the gap between research and innovation and regulatory processes. In this commentary we highlight the tools developed by NORMAN that we consider most relevant to supporting the PARC initiative: (i) joint data space and cutting-edge research tools for risk assessment of contaminants of emerging concern; (ii) collaborative European framework to improve data quality and comparability; (iii) advanced data analysis tools for a European early warning system and (iv) support to national and European chemical risk assessment thanks to harnessing, combining and sharing evidence and expertise on CECs. By combining the extensive knowledge and experience of the NORMAN network with the financial and policy-related strengths of the PARC initiative, a large step towards the goal of a non-toxic environment can be taken.
|
|
| 2. |
- Alijagic, Andi, 1992-, et al.
(författare)
-
A Novel Nanosafety Approach Using Cell Painting, Metabolomics, and Lipidomics Captures the Cellular and Molecular Phenotypes Induced by the Unintentionally Formed Metal-Based (Nano)Particles
- 2023
-
Ingår i: Cells. - : MDPI. - 2073-4409. ; 12:2
-
Tidskriftsartikel (refereegranskat)abstract
- Additive manufacturing (AM) or industrial 3D printing uses cutting-edge technologies and materials to produce a variety of complex products. However, the effects of the unintentionally emitted AM (nano)particles (AMPs) on human cells following inhalation, require further investigations. The physicochemical characterization of the AMPs, extracted from the filter of a Laser Powder Bed Fusion (L-PBF) 3D printer of iron-based materials, disclosed their complexity, in terms of size, shape, and chemistry. Cell Painting, a high-content screening (HCS) assay, was used to detect the subtle morphological changes elicited by the AMPs at the single cell resolution. The profiling of the cell morphological phenotypes, disclosed prominent concentration-dependent effects on the cytoskeleton, mitochondria, and the membranous structures of the cell. Furthermore, lipidomics confirmed that the AMPs induced the extensive membrane remodeling in the lung epithelial and macrophage co-culture cell model. To further elucidate the biological mechanisms of action, the targeted metabolomics unveiled several inflammation-related metabolites regulating the cell response to the AMP exposure. Overall, the AMP exposure led to the internalization, oxidative stress, cytoskeleton disruption, mitochondrial activation, membrane remodeling, and metabolic reprogramming of the lung epithelial cells and macrophages. We propose the approach of integrating Cell Painting with metabolomics and lipidomics, as an advanced nanosafety methodology, increasing the ability to capture the cellular and molecular phenotypes and the relevant biological mechanisms to the (nano)particle exposure.
|
|
| 3. |
- Olsman, Helena, et al.
(författare)
-
Ah receptor agonists in UV-exposed toluene solutions of decabromodiphenyl ether (decaBDE) and in soils contaminated with polybrominated diphenyl ethers (PBDEs)
- 2006
-
Ingår i: Environmental Science and Pollution Research. - : Springer Science and Business Media LLC. - 0944-1344 .- 1614-7499. ; 13:3, s. 161-169
-
Tidskriftsartikel (refereegranskat)abstract
- GOAL, SCOPE AND BACKGROUND: The use of polybrominated diphenyl ethers (PBDEs) as flame retardants increases the risk for emissions of other brominated compounds, such as polybrominated dibenzodioxins (PBDDs) and dibenzofurans (PBDFs). The large homology in structure of PBDD/Fs and mechanism of toxic action, i.e. the capacity to activate the Ah receptor (AhR) pathway, compared to their well-studied chlorinated analogues, justifies a raised concern to study the environmental levels and fate of these compounds. Decabromodiphenyl ether (decaBDE) is the most widely used PBDE today. Studies on photolytic debromination of decaBDE in organic solvents have shown debromination of decaBDE, as well as formation of PBDFs. However, little is known about the transformation mechanisms and there are only scarce data on photoproducts and PBDE transformation in environmentally relevant matrices. In this study, mechanism-specific dioxin bioassays were used to study photolytic formation of AhR agonists in toluene solutions of decaBDE. In addition, the influence of irradiation time and UV-light wavelength on the formation was studied. PBDE congener patterns and presence of PBDD/Fs were analysed. Further, AhR agonists were analysed in agricultural soils contaminated with PBDEs. Soils were also exposed to UV-light to study changes in AhR agonist levels. METHODS: Toluene solutions of decaBDE were irradiated using three different spectra of UV-light, simulating UV-A (320-400 nm), UV-AB (280-400 nm), and UV-ABC (250-400 nm). Additionally, decaBDE solutions were exposed to narrow wavelength intervals (10 nm bandwidth) with the central wavelengths 280, 290, 300, 310, 320, 330, 340, 350, 360 nm. AhR agonists in decaBDE solutions were analysed with two different bioassays, the chick embryo liver-cell assay for dioxins (Celcad) and the dioxin responsive, chemically activated luciferase expression assay (DR-Calux). Also, the decaBDE solutions were analysed with LRGC-LRMS to obtain PBDE congener patterns for breakdown of decaBDE, and with HRGC-HRMS, for presence of PBDD/Fs. Four soils were exposed to UV-AB light, under both dry and moist conditions. Levels of AhR agonists in soil extract fractions, before and after UV-exposure, were analysed with the DR-Calux. RESULTS AND DISCUSSION: Significant levels of photoproducts able to activate the AhR pathway, up to 31 ng bio-TEQ/ml, were formed in UV-exposed decaBDE solutions. The transformation yield of decaBDE into AhR agonists was estimated to be at the 0.1%-level, on a molar basis. The net formation was highly dependent on wavelength, with the sample irradiated at 330 nm showing the highest level of dioxin-like activity. No activity was detected in controls. PBDE analysis confirmed decaBDE degradation and a clear time-dependent pattern for debromination of PBDE congeners. AhR agonist effect in the recalcitrant fractions of the soils corresponded to the levels of chemically derived TEQs, based only on chlorinated dioxin-like compounds in an earlier study. It was concluded that no significant levels of other AhR agonists, e.g. PBDFs, were accumulated in the soil. UV-light caused changes in AhR-mediated activity in the more polar and less persistent fractions of the soils, but it is not known which compounds are responsible for this. RECOMMENDATIONS AND PERSPECTIVES: The laboratory experiments in this study show that high levels of AhR agonists can be formed as photoproducts of decaBDE and it is important to elucidate if and under which conditions this might occur in nature. However, soil analysis indicates that photoproducts of PBDE do not contribute to the accumulated levels of persistent dioxin-like compounds in agricultural soil. Still, more data is needed to fully estimate the environmental importance of PBDE photolysis and occurrence of its photoproducts in other environmental compartments. Analysis with dioxin bioassays enabled us to gather information about photoproducts formed from decaBDE even though the exact identities of these compounds were not known. CONCLUSION: Bioassays are valuable for studying environmental transformation processes like this, where chemical analysis and subsequent toxicological evaluation requires available standard compounds and information on toxicological potency. The use of bioassays allows a rapid evaluation of toxicological relevance.
|
|
| 4. |
- Huerta Buitrago, B., et al.
(författare)
-
Hazard assessment of sediments from a wetland system for treatment of landfill leachate using bioassays
- 2013
-
Ingår i: Ecotoxicology and Environmental Safety. - Maryland Heights, MO : Elsevier BV. - 0147-6513 .- 1090-2414. ; 97, s. 255-262
-
Tidskriftsartikel (refereegranskat)abstract
- Four bioassays were used in this study for the hazard assessment of sediments from sediment traps and several ponds in a treatment wetland for landfill leachate at Atleverket, Sweden. In the 6-day solid phase microbiotest with the sediment-dwelling crustacean Heterocypris incongruens both acute and chronic effects were observed with a gradual decrease and loss of toxicity with treatment in the wetland system. Some samples showed a low toxicity in porewater and only one sample was weakly toxic in the whole sediment test when assessed with Aliivibrio fischeri (Vibro fischeri). No genotoxicity was detected in the umu test. The toxicity response in the H4IIE- luc test evaluating the presence of dioxin-like compounds was considerably higher in the samples from the sediment traps. The hazard of the sediment therefore appears to be highest in the sediment traps and pond 1 with the methods employed. The result indicates that the wetland system has a design supporting the concentration and sequestration of toxic substances in the first part of the wetland. Based upon the results we suggest that hazard assessment of sediments from other treatment wetlands for landfill leachate should be conducted.
|
|
| 5. |
- Julander, Anneli, et al.
(författare)
-
Distribution of brominated flame retardants in different dust fractions in air from an electronics recycling facility
- 2005
-
Ingår i: Science of the Total Environment. - : Elsevier BV. - 0048-9697 .- 1879-1026. ; 350:1-3, s. 151-160
-
Tidskriftsartikel (refereegranskat)abstract
- Twelve air samples were collected from an electronic recycling facility in Sweden representing three different dust fractions; respirable, total and inhalable dust. Four samples were collected from each fraction. The highest concentration of polybrominated diphenyl ether (PBDE) #209 (ten bromine atoms) was found in the samples from the inhalable dust fraction (ID), which was 10 times higher than for the "total dust" fraction (TD). The concentration ranges were 157.6-208.6; 13.9-16.7; and 2.8-3.3 ng/m3 for inhalable, total and respirable fractions, respectively. The second most abundant PBDE congener was PBDE #183 (seven bromine atoms), followed by the second most abundant substance 1,2-bis(2,4,6-tribromophenoxy)ethane (BTBPE) in all samples. In addition, decabromodiphenyl ethane (DeBDethane) was tentatively identified in five of the samples. Because of the large differences in air concentrations between the three fractions in ID, TD and RD, it is suggested that the inhalable instead of "total dust" fraction should be used to assess air concentrations, in particular for the larger and higher brominated flame retardants (BFRs).
|
|
| 6. |
- Alijagic, Andi, 1992-, et al.
(författare)
-
Particle Safety Assessment in Additive Manufacturing : From Exposure Risks to Advanced Toxicology Testing.
- 2022
-
Ingår i: Frontiers in Toxicology. - : Frontiers Media S.A.. - 2673-3080. ; 4
-
Tidskriftsartikel (refereegranskat)abstract
- Additive manufacturing (AM) or industrial three-dimensional (3D) printing drives a new spectrum of design and production possibilities; pushing the boundaries both in the application by production of sophisticated products as well as the development of next-generation materials. AM technologies apply a diversity of feedstocks, including plastic, metallic, and ceramic particle powders with distinct size, shape, and surface chemistry. In addition, powders are often reused, which may change the particles' physicochemical properties and by that alter their toxic potential. The AM production technology commonly relies on a laser or electron beam to selectively melt or sinter particle powders. Large energy input on feedstock powders generates several byproducts, including varying amounts of virgin microparticles, nanoparticles, spatter, and volatile chemicals that are emitted in the working environment; throughout the production and processing phases. The micro and nanoscale size may enable particles to interact with and to cross biological barriers, which could, in turn, give rise to unexpected adverse outcomes, including inflammation, oxidative stress, activation of signaling pathways, genotoxicity, and carcinogenicity. Another important aspect of AM-associated risks is emission/leakage of mono- and oligomers due to polymer breakdown and high temperature transformation of chemicals from polymeric particles, both during production, use, and in vivo, including in target cells. These chemicals are potential inducers of direct toxicity, genotoxicity, and endocrine disruption. Nevertheless, understanding whether AM particle powders and their byproducts may exert adverse effects in humans is largely lacking and urges comprehensive safety assessment across the entire AM lifecycle-spanning from virgin and reused to airborne particles. Therefore, this review will detail: 1) brief overview of the AM feedstock powders, impact of reuse on particle physicochemical properties, main exposure pathways and protective measures in AM industry, 2) role of particle biological identity and key toxicological endpoints in the particle safety assessment, and 3) next-generation toxicology approaches in nanosafety for safety assessment in AM. Altogether, the proposed testing approach will enable a deeper understanding of existing and emerging particle and chemical safety challenges and provide a strategy for the development of cutting-edge methodologies for hazard identification and risk assessment in the AM industry.
|
|
| 7. |
- Bergknut, Magnus, et al.
(författare)
-
Identification of potentially toxic compounds in complex extracts of environmental samples using gas chromatography-mass spectrometry and multivariate data analysis
- 2007
-
Ingår i: Environmental Toxicology and Chemistry. - New York : Pergamon. - 0730-7268 .- 1552-8618. ; 26:2, s. 208-217
-
Tidskriftsartikel (refereegranskat)abstract
- In this study, we examined 31 samples of varying chemical composition, including samples of soils from gasworks, coke production sites, and sites where wood preservatives were heavily used; ash and soot from municipal solid waste incinerators; antiskid sand; and dust from areas with heavy road traffic. The samples were comprehensively chemically characterized, especially their polycyclic aromatic compound contents, using gas chromatography-time-of-flight mass spectrometry, whereas their biological effects were assessed using dehydrogenase activity, root growth (Hordeum vulgare), reproduction of springtails (Folsomia candida), algal growth (Desmodesmus subspicatus), germinability (Sinapis alba), Vibrio fischeri, DR-CALUX, and Ames Salmonella assays. The number of compounds detected in the samples ranged from 123 to 527. Using the multivariate regression technique of partial-least-squares projections to latent structures, it was possible to find individual compounds that exhibited strong correlations with the different biological responses. Some of the results, however, indicate that a broader chemical characterization may be needed to identify all the compounds that may cause the measured biological responses.
|
|
| 8. |
- Engwall, Magnus, et al.
(författare)
-
Bioanalys av organiska föroreningars biotillgänglighet : tillämpning i sanerade massor
- 2009
-
Rapport (populärvet., debatt m.m.)abstract
- Polycykliska aromatiska kolväten (PAHer) är relativt vanliga i förorenadeområden, särskilt på gamla gasverktomter, bensinstationer och tidigare impregneringsanläggningar.På grund av deras toxicitet så är sanering av PAH-förorenadeområden av hög prioritet. För att minska riskerna med PAH-förorenade jordar,både före och efter sanering, är det viktigt att åstadkomma en heltäckande riskbedömningoch säker klassning av dessa jordmassor. De generella riktvärden förPAH-förorenad mark som används idag är i regel baserade på kemisk analys av 16standard PAHer (PAH16), trots att det ofta förekommer 100-tals PAHer och PAHmetaboliteri jordarna.I detta projekt har vi genom att jämföra kemisk och biologisk analys (H4IIEluc)av ett flertal sanerade PAH-förorenade jordprover studerat om toxicitetenverkligen minskar i proportion till minskningen av PAHer i jordarna. H4IIE-luc ären mekanismspecifik bioanalys som detekterar alla ämnen som aktiverar Ahreceptorn,en av de två viktigaste mekanismerna bakom PAHers toxicitet. Jämförelsenav resultaten visade att den totala toxiciteten i de sanerade jordprovernainte gick att förklara med kemisk analys av PAH16 och att man därmed med dagensanalysmetodik riskerar att missa toxikologiskt relevanta PAHer och andra liknandeämnen. Vidare kemiska identifieringsstudier samt bioanalytiska studier krävs föratt ta reda på om dessa okända ämnen utgör en risk för människa eller miljö.Våra resultat visar på svagheten med kemisk analys av ett mindre antal ämnensom grundval för klassning av renade massor. Det är därför är rimligt att inkluderamekanismspecifika tester i riskbedömning och vid klassning av renade PAHförorenadejordar. Dels för att minimera riskerna som dessa jordar kan utgöra förmänniskor och miljö, dels för att man med en större säkerhet och i större utsträckningskall kunna återanvända sanerade jordmassor.
|
|
| 9. |
- Fallet, Manon, 1992-, et al.
(författare)
-
Present and future challenges for the investigation of transgenerational epigenetic inheritance
- 2023
-
Ingår i: Environment International. - : Elsevier. - 0160-4120 .- 1873-6750. ; 172
-
Forskningsöversikt (refereegranskat)abstract
- Epigenetic pathways are essential in different biological processes and in phenotype-environment interactions in response to different stressors and they can induce phenotypic plasticity. They encompass several processes that are mitotically and, in some cases, meiotically heritable, so they can be transferred to subsequent generations via the germline. Transgenerational Epigenetic Inheritance (TEI) describes the phenomenon that phenotypic traits, such as changes in fertility, metabolic function, or behavior, induced by environmental factors (e.g., parental care, pathogens, pollutants, climate change), can be transferred to offspring generations via epigenetic mecha-nisms. Investigations on TEI contribute to deciphering the role of epigenetic mechanisms in adaptation, adver-sity, and evolution. However, molecular mechanisms underlying the transmission of epigenetic changes between generations, and the downstream chain of events leading to persistent phenotypic changes, remain unclear. Therefore, inter-, (transmission of information between parental and offspring generation via direct exposure) and transgenerational (transmission of information through several generations with disappearance of the triggering factor) consequences of epigenetic modifications remain major issues in the field of modern biology.In this article, we review and describe the major gaps and issues still encountered in the TEI field: the general challenges faced in epigenetic research; deciphering the key epigenetic mechanisms in inheritance processes; identifying the relevant drivers for TEI and implement a collaborative and multi-disciplinary approach to study TEI. Finally, we provide suggestions on how to overcome these challenges and ultimately be able to identify the specific contribution of epigenetics in transgenerational inheritance and use the correct tools for environmental science investigation and biomarkers identification.
|
|
| 10. |
- Hollert, Henner, et al.
(författare)
-
Biological and Chemical Determination of Dioxin-like Compounds in Sediments by Means of a Sediment Triad Approach in the Catchment Area of the River Neckar
- 2002
-
Ingår i: Ecotoxicology. - 0963-9292 .- 1573-3017. ; 11:5, s. 323-36
-
Tidskriftsartikel (refereegranskat)abstract
- To evaluate the sediment quality of selected sites in the catchment area of the River Neckar, an integrative assessment approach was used to assess the ecological hazard potential of dioxin-like sediment compounds. The approach is based on 7-ethoxyresorufin-O -deethylase (EROD) induction in embryonic chicken liver culture and comprehensive chemical analyses of polycyclic aromatic hydrocarbons (priority PAHs according to the US Environmental Protection Agency). The majority of the sediment extracts exhibited high potencies as EROD-inducers. In one sediment sample, which was influenced by a sewage treatment plant, a very high concentration of 930 ng bioassay 2,3,7,8-tetrachlorodibenzo-p -dioxin (TCDD) equivalents (bio-TEQs )/g organic carbon could be determined. However, in none of the samples, more than 6% of the EROD-inducing potency could be explained by the PAHs analyzed chemically. Thus, non-analyzed compounds with EROD-inducing potency were present in the extracts. A fractionation of sediment samples according to pH allowed to localize the major part of EROD-inducing compounds in the neutral fractions. However, a significant portion of the EROD induction could also be explained by the acidic fractions. Following the concept of the Sediment Quality Triad according to Chapman, in situ alterations of macrozoobenthos were examined. A comparison of the results predicted by the EROD assay and chemical analyses with alterations in situ , as measured by means of the saprobic index and the ecotoxicological index according to Carmargo, revealed a high ecological relevance of the results of bioassays and chemical analyses for major sites.
|
|
