| 1. |
- Chen, Zhe, et al.
(författare)
-
Nano-scale characterization of white layer in broached Inconel 718
- 2017
-
Ingår i: Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. - Amsterdam : Elsevier BV. - 0921-5093 .- 1873-4936. ; 684, s. 373-384
-
Tidskriftsartikel (refereegranskat)abstract
- The formation mechanism of white layers during broaching and their mechanical properties are not well investigated and understood to date. In the present study, multiple advanced characterization techniques with nano-scale resolution, including transmission electron microscopy (TEM), transmission Kikuchi diffraction (TKD), atom probe tomography (APT) as well as nano-indentation, have been used to systematically examine the microstructural evolution and corresponding mechanical properties of a surface white layer formed when broaching the nickel-based superalloy Inconel 718.TEM observations showed that the broached white layer consists of nano-sized grains, mostly in the range of 20–50 nm. The crystallographic texture detected by TKD further revealed that the refined microstructure is primarily caused by strong shear deformation. Co-located Al-rich and Nb-rich fine clusters have been identified by APT, which are most likely to be γ′ and γ′′ clusters in a form of co-precipitates, where the clusters showed elongated and aligned appearance associated with the severe shearing history. The microstructural characteristics and crystallography of the broached white layer suggest that it was essentially formed by adiabatic shear localization in which the dominant metallurgical process is rotational dynamic recrystallization based on mechanically-driven subgrain rotations. The grain refinement within the white layer led to an increase of the surface nano-hardness by 14% and a reduction in elastic modulus by nearly 10% compared to that of the bulk material. This is primarily due to the greatly increased volume fraction of grain boundaries, when the grain size was reduced down to the nanoscale.
|
|
| 2. |
- Ekener, Elisabeth, 1963-, et al.
(författare)
-
Developing Life Cycle Sustainability Assessment methodology by applying values-based sustainability weighting - Tested on biomass based and fossil transportation fuels
- 2018
-
Ingår i: Journal of Cleaner Production. - : Elsevier BV. - 0959-6526 .- 1879-1786. ; 181, s. 337-351
-
Tidskriftsartikel (refereegranskat)abstract
- The production and use of transportation fuels can lead to sustainability impacts. Assessing them simultaneously in a holistic way is a challenge. This paper examines methodology for assessing the sustainability performance of products in a more integrated way, including a broad range of social impacts. Life Cycle Sustainability Assessment (LCSA) methodology is applied for this assessment. LSCA often constitutes of the integration of results from social LCA (S-LCA), environmental life cycle assessment (E-LCA) and life cycle costing (LCC). In this study, an S-LCA from an earlier project is extended with a positive social aspect, as well as refined and detailed. E-LCA and LCC results are built from LCA database and literature. Multi Criteria Decision Analysis (MCDA) methodology is applied to integrate the results from the three different assessments into an LCSA. The weighting of key sustainability dimensions in the MCDA is performed in different ways, where the sustainability dimensions are prioritized differently priority based on the assumed values of different stakeholder profiles (Egalitarian, Hierarchist, and Individualist). The developed methodology is tested on selected biomass based and fossil transportation fuels - ethanol produced from Brazilian sugarcane and US corn/maize, and petrol produced from Russian and Nigerian crude oils, where it delineates differences in sustainability performance between products assessed. The outcome in terms of relative ranking of the transportation fuel chains based on sustain ability performance differs when applying different decision-maker profiles. This result highlights and supports views that there is no one single answer regarding which of the alternatives that is most sustainable. Rather, it depends strongly upon the worldview and values held by the decision maker. A key conclusion is that sustainability assessments should pay more attention to potential differences in underlying values held by key stakeholders in relevant societal contexts. The LCSA methodology still faces challenges regarding results integration but MCDA in combination with stakeholder profiles appears to be a useful approach to build on further.
|
|
| 3. |
- Punzi, Marisa, et al.
(författare)
-
Combined anaerobic-ozonation process for treatment of textile wastewater : Removal of acute toxicity and mutagenicity
- 2015
-
Ingår i: Journal of Hazardous Materials. - : Elsevier BV. - 0304-3894 .- 1873-3336. ; 292, s. 52-60
-
Tidskriftsartikel (refereegranskat)abstract
- A novel set up composed of an anaerobic biofilm reactor followed by ozonation was used for treatment of artificial and real textile effluents containing azo dyes. The biological treatment efficiently removed chemical oxygen demand and color. Ozonation further reduced the organic content of the effluents and was very important for the degradation of aromatic compounds, as shown by the reduction of UV absorbance. The acute toxicity toward Vibrio fischeri and the shrimp Artemia salina increased after the biological treatment. No toxicity was detected after ozonation with the exception of the synthetic effluent containing the highest concentration, 1. g/l, of the azo dye Remazol Red. Both untreated and biologically treated textile effluents were found to have mutagenic effects. The mutagenicity increased even further after 1. min of ozonation. No mutagenicity was however detected in the effluents subjected to longer exposure to ozone. The results of this study suggest that the use of ozonation as short post-treatment after a biological process can be beneficial for the degradation of recalcitrant compounds and the removal of toxicity of textile wastewater. However, monitoring of toxicity and especially mutagenicity is crucial and should always be used to assess the success of a treatment strategy. © 2015 Elsevier B.V.
|
|
| 4. |
- Zambrano, Jesús, et al.
(författare)
-
Optimal steady-state design of zone volumes of bioreactors with Monod growth kinetics
- 2015
-
Ingår i: Biochemical Engineering Journal. - : Elsevier BV. - 1369-703X .- 1873-295X. ; 100, s. 59-66
-
Tidskriftsartikel (refereegranskat)abstract
- This paper deals with steady-state analysis and design of bioreactors consisting of a number of completely stirred tank reactors (CSTRs) in series. The study is confined to one consumed (substrate) and one consuming constituent (biomass). The specific microbial growth rate is assumed to be described by Monod kinetics. The death of biomass is assumed to be negligible. Two optimal design problems for a large number of CSTRs in series are studied: to minimize the effluent substrate concentration for a given total volume, and to minimize the total volume for a given effluent substrate concentration. As an appealing alternative to solve these problems numerically, it is proposed to consider the asymptotic case where the number of CSTRs tends to infinity. This is shown to correspond to one CSTR in series with a plug flow reactor (PFR). A CSTR with a sufficient large volume is needed to avoid wash-out of the biomass. The main result is that both design problems for the CSTR + PFR configuration have the same solution with respect to the optimal volume of the CSTR, which is given as an explicit function of the incoming substrate concentration, the volumetric flow rate and the coefficients of the Monod growth rate function. Numerical results indicate that the plug flow approach may be used as a feasible design procedure even for a reasonably low number of CSTRs in series.
|
|
| 5. |
- Andersson, Erik, et al.
(författare)
-
Ambio fit for the 2020s
- 2022
-
Ingår i: Ambio. - : Springer Nature. - 0044-7447 .- 1654-7209. ; 51:5, s. 1091-1093
-
Tidskriftsartikel (refereegranskat)
|
|
| 6. |
- Olenius, Tinja, et al.
(författare)
-
Modeling of exhaust gas cleaning by acid pollutant conversion to aerosol particles
- 2021
-
Ingår i: Fuel. - : Elsevier BV. - 0016-2361 .- 1873-7153. ; 290
-
Tidskriftsartikel (refereegranskat)abstract
- Sulfur and nitrogen oxides (SOx and NOx) are harmful pollutants emitted into the atmosphere by industry and transport sectors. In addition to being hazardous gases, SOx and NOx form sulfuric and nitric acids which contribute to the formation of airborne particulate matter through nucleation and condensation, hence magnifying the environmental impact of these species. In this work, we build a modeling framework for utilizing this phenomenon for low-temperature exhaust gas cleaning. It has been reported that ammonia gas can be used to facilitate particle formation from the aforementioned acids, and thus remove these gaseous pollutants by converting them into ammonium sulfate and nitrate particles. Here we provide comprehensive modeling tools for applying this idea to exhaust gas cleaning by combining detailed models for nucleation, gas-particle mass exchange and particle population dynamics. We demonstrate how these models can be used to find advantageous operating conditions for a cleaning unit. In particular, the full model is computationally cheap and enables optimization of the particle formation efficiency and particle growth, hence ensuring sufficient conversion of gaseous pollutants into collectable particulate matter. This constitutes a ground for future engineering tools for designing next-generation sustainable exhaust gas cleaners.
|
|
| 7. |
- Larsson, Ann-Charlotte, et al.
(författare)
-
Targeting by Comparison with Laboratory Experiments the SCR Catalyst Deactivation Process by Potassium and Zinc Salts in a Large-Scale Biomass Combustion Boiler
- 2006
-
Ingår i: Energy & Fuels. - : American Chemical Society (ACS). - 0887-0624 .- 1520-5029. ; 20:4, s. 1398-1405
-
Tidskriftsartikel (refereegranskat)abstract
- The deactivation of a commercial selective catalytic reduction (SCR) catalyst of type V2O5−WO3/TiO2 has been studied in this work through comparisons of results from a full-scale biomass combustion plant with those from laboratory experiments. In the latter, the catalyst was exposed to KCl, K2SO4, and ZnCl2 by both wet impregnation with diluted salt solutions and deposition of generated submicrometer aerosol particles by means of an electrostatic field. The reactivity of freshly prepared and deactivated catalyst samples was examined in the SCR reaction, for which the influence of the different salts and the method of exposure were explored. Chemical and physical characterizations of the catalyst samples were carried out focusing on surface area, pore volume, pore size, chemical composition, and the penetration profiles of potassium and zinc. Particle-deposition deactivation as well as commercially exposed catalyst samples were shown to impact surface area and catalyst activity similarly and to have penetration profiles with pronounced peaks. Salt impregnation influenced pore sizes and catalyst activity more strongly and showed flat penetration profiles. Deposition of submicrometer-sized particles on the monolithic SCR catalyst has been shown to induce deactivation of the catalyst with characteristics resembling those obtained in a commercial biomass combustion plant; the laboratory process can be used to further assess the deactivation mechanism by biomass combustion.
|
|
| 8. |
- Langer, Sarka, 1960, et al.
(författare)
-
Impacts of fuel quality on indoor environment onboard a ship: From policy to practice
- 2020
-
Ingår i: Transportation Research Part D-Transport and Environment. - : Elsevier BV. - 1361-9209 .- 1879-2340. ; 83
-
Tidskriftsartikel (refereegranskat)abstract
- Environmental considerations, concerning the negative impacts of ship exhaust gases and particles on ambient air quality, are behind the requirements of cleaner marine fuels currently applied in designated emission control areas (ECAs). We investigated the impact of a ship operating on two types of fuel on the indoor air quality onboard. Gaseous and particulate air pollutants were measured in the engine room and the accommodation sections on-board an icebreaker operating first on Heavy Fuel Oil (HFO, 1%-S), and later Marine Diesel Oil (MDO, 0.1%-S). Statistically significant decrease of SO2, NOx, PM2.5 and particle number concentration were observed when the ship was operating on MDO. Due to the higher content of alkylated PAHs in MDO compared to HFO, the concentration of PAHs increased during operation on MDO. The particulate PAHs classified as carcinogens, were similar to or lower in the MDO campaign. Chemical analysis of PM2.5 revealed that the particles consisted mainly of organic carbon and sulfate, although the fraction of metals was quite large in particles from the engine room. Principal Component Analysis of all measured parameters showed a clear difference between HFO and MDO fuel on the indoor environmental quality on-board the ship. This empirical study poses a first example on how environmental policy-making impacts not only the primary target at a global level, but also brings unexpected localized benefits at workplace level. The study emphasizes the need of further investigations on the impact of new marine fuels and technologies on the indoor air environments on board.
|
|
| 9. |
- Fhager, Andreas, 1976, et al.
(författare)
-
Image Reconstruction in Microwave Tomography Using a Dielectric Debye Model
- 2012
-
Ingår i: IEEE Transactions on Biomedical Engineering. - 0018-9294 .- 1558-2531. ; 59:1, s. 156 - 166
-
Tidskriftsartikel (refereegranskat)abstract
- In this paper, quantitative dielectric image reconstruction based on broadband microwave measurements is investigated. A time-domain-based algorithm is derived where Debye model parameters are reconstructed in order to take into account the strong dispersive behavior found in biological tissue. The algorithm is tested with experimental and numerical data in order to verify the algorithm and to investigate improvements in the reconstructed image resulting from the improved description of the dielectric properties of the tissue when using broadband data. The comparison is made in relation to the more commonly used conductivity model. For the evaluation, two examples were considered, the first was a lossy saline solution and the second was less lossy tap water. Both liquids are strongly dispersive and used as a background medium in the imaging examples. The results show that the Debye model algorithm is of most importance in the tap water for a bandwidth of more than 1.5 GHz. Also the saline solution exhibits a dispersive behavior but since the losses restrict the useful bandwidth, the Debye model is of less significance even if somewhat larger and stronger artifacts can be seen in the conductivity model reconstructions.
|
|
| 10. |
- Kuktaite, Ramune, et al.
(författare)
-
Monitoring Nanostructure Dynamics and Polymerization in Glycerol Plasticized Wheat Gliadin and Glutenin Films : Relation to Mechanical Properties
- 2016
-
Ingår i: ACS Sustainable Chemistry and Engineering. - : American Chemical Society (ACS). - 2168-0485. ; 4:6, s. 2998-3007
-
Tidskriftsartikel (refereegranskat)abstract
- Gliadin and glutenin proteins with 10, 20, 30 and 40% of glycerol were compression molded into films (130 °C) and evaluated for protein polymerization, β-sheet structure and nano-structural morphology. Here, for the first time we show how different amounts of glycerol impact the nano-structure and functional properties of the gliadin and glutenin films. Most polymerized protein was found in the gliadin films with 20 and 30% glycerol, and in all the glutenin films (except 10%), by RP-HPLC. A β-sheet-rich protein structure was found to be high in the 10 and 20% glycerol gliadin films, and in the 20 and 30% glycerol glutenin films by FT-IR. Glycerol content of 20, 30 and 40% impacted the nano-structural morphology of the gliadin glycerol films observed by SAXS, and to a limited extent for 10 and 20% glycerol gliadin films revealed by WAXS. No ordered nano-structure was found for the glutenin glycerol films. The 20%, 30% and 40% glycerol films were the most tunable for specific mechanical properties. For the highest stiffness and strength, the 10% glycerol protein films were the best choice.
|
|
