| 1. |
- Liu, Z. Y., et al.
(författare)
-
Cooling rate effect on Young's modulus and hardness of a Zr-based metallic glass
- 2011
-
Ingår i: Journal of Alloys and Compounds. - : Elsevier BV. - 0925-8388. ; 509:7, s. 3269-3273
-
Tidskriftsartikel (refereegranskat)abstract
- It is known that cooling rate can affect the atomic structure and thus may possibly affect the mechanical properties of metallic glasses (MGs). In spite of the considerable efforts on the cooling rate, its effect on the mechanical properties is controversial at the present time. In this study, we present a micromechanical study of the cooling-rate effect on Young's moduli and hardness of the cast bulks and melt-spun ribbons for a Zr(55)Pd(10)Cu(20)Ni(5)Al(10) metallic glass. Using the classic nanoindentation method, the Young's moduli of the ribbon samples obtained at higher cooling rates were measured which appeared to be much lower than those of the bulk samples. However, through further experiments on slice samples cut from the as-cast bulks and finite-element (FE) analyses, we have clearly demonstrated that the measured difference in elastic moduli was mainly caused by the sample thickness effect in nanoindentation tests. To overcome such a confounding effect, microcompression experiments were performed on the as-cast and as-spun MG samples, respectively. Being consistent with the findings from nanoindentation, the microcompression results showed that the cooling rate, as ranging from similar to 10(2) to similar to 10(6) K/s, essentially has no influence on the Young's modulus and hardness of the metallic glasses. (C) 2010 Elsevier B.V. All rights reserved.
|
|
| 2. |
- Abazov, V. M., et al.
(författare)
-
Measurement of the t(t)over-bar production cross section in p(p)over-bar collisions at root s=1.96 TeV
- 2008
-
Ingår i: Physical Review Letters. - 0031-9007 .- 1079-7114. ; 100:19:100, s. 192004-
-
Tidskriftsartikel (refereegranskat)abstract
- We measure the t (t) over bar production cross section in p (p) over bar collisions at root s = 1.96 TeV in the lepton + jets channel. Two complementary methods discriminate between signal and background: b tagging and a kinematic likelihood discriminant. Based on 0.9 fb(-1) of data collected by the D0 detector at the Fermilab Tevatron Collider, we measure sigma(t (t) over bar) = 7.62 +/- 0.85 pb, assuming the current world average m(t) = 172.6 GeV. We compare our cross section measurement with theory predictions to determine a value for the top-quark mass of 170 +/- 7 GeV.
|
|
| 3. |
- Abazov, V. M., et al.
(författare)
-
Observation of the B-c meson in the exclusive decay B-c -> J/psi pi
- 2008
-
Ingår i: Physical Review Letters. - 0031-9007 .- 1079-7114. ; 101:1, s. 012001-:101, s. 012001-
-
Tidskriftsartikel (refereegranskat)abstract
- A fully reconstructed B-c -> J/psi pi signal is observed with the D0 detector at the Fermilab Tevatron p (p) over bar collider using 1.3 fb(-1) of integrated luminosity. The signal consists of 54 +/- 12 candidates with a significance that exceeds 5 standard deviations, and confirms earlier observations of this decay. The measured mass of the B-c meson is 6300 +/- 14(stat)+/- 5(syst) MeV/c(2).
|
|
| 4. |
- Abazov, V. M., et al.
(författare)
-
Search for W ' boson resonances decaying to a top quark and a bottom quark
- 2008
-
Ingår i: Physical Review Letters. - 0031-9007 .- 1079-7114. ; 100:21, s. 211803-:100, s. 211803-
-
Tidskriftsartikel (refereegranskat)abstract
- We search for the production of a heavy W ' gauge boson that decays to third generation quarks in 0: 9 fb(-1) of p (p) over bar collisions at root s = 1: 96 TeV, collected with the D0 detector at the Fermilab Tevatron collider. We find no significant excess in the final-state invariant mass distribution and set upper limits on the production cross section times branching fraction. For a left-handed W ' boson with SM couplings, we set a lower mass limit of 731 GeV. For right-handed W ' bosons, we set lower mass limits of 739 GeV if the W ' boson decays to both leptons and quarks and 768 GeV if the W ' boson decays only to quarks. We also set limits on the coupling of the W ' boson to fermions as a function of its mass.
|
|
| 5. |
- Abazov, V. M., et al.
(författare)
-
Search for W ' bosons decaying to an electron and a neutrino with the D0 detector
- 2008
-
Ingår i: Physical Review Letters. - 0031-9007 .- 1079-7114. ; 100:3, s. 031804-:100, s. 031804-
-
Tidskriftsartikel (refereegranskat)abstract
- This Letter describes the search for a new heavy charged gauge boson W-' decaying into an electron and a neutrino. The data were collected with the D0 detector at the Fermilab Tevatron p (p) over bar Collider at root s=1.96 TeV, and correspond to an integrated luminosity of about 1 fb(-1). Lacking any significant excess in the data in comparison with known processes, an upper limit is set on sigma(')(W)xB(W-'-> e nu), and a W-' boson with mass below 1.00 TeV can be excluded at the 95% C.L., assuming standard-model-like couplings to fermions. This result significantly improves upon previous limits and is the most stringent to date.
|
|
| 6. |
- Abazov, V. M., et al.
(författare)
-
Search for ZZ and z gamma* production in p(p)over-bar collisions at root s=1.96 TeV and limits on anomalous ZZZ and ZZ gamma* couplings
- 2008
-
Ingår i: Physical Review Letters. - 0031-9007 .- 1079-7114. ; 100:13, s. 131801-:100, s. 131801-
-
Tidskriftsartikel (refereegranskat)abstract
- We present a study of mu mu mu mu, eeee, and mu mu ee events using 1 fb(-1) of data collected with the D0 detector at the Fermilab Tevatron p (p) over bar Collider at root s = 1.96 TeV. Requiring the lepton pair masses to be greater than 30 GeV, we observe one event, consistent with the expected background of 0.13 +/- 0.03 events and with the predicted standard model ZZ and Z gamma(*) production of 1.71 +/- 0.15 events. We set an upper limit on the ZZ and Z gamma(*) cross section of 4.4 pb at the 95% C.L. We also derive limits on anomalous neutral trilinear ZZZ and ZZ gamma(*) gauge couplings. The one-parameter 95% C.L. coupling limits with a form-factor scale Lambda = 1.2 TeV are -0.28 < f(40)(Z)< 0.28, -0.31 < f(50)(Z)< 0.29, -0.26 < f(40)(gamma)< 0.26, and -0.30 < f(50)(gamma)< 0.28.
|
|
| 7. |
- Aad, G., et al.
(författare)
-
Commissioning of the ATLAS Muon Spectrometer with cosmic rays
- 2010
-
Ingår i: European Physical Journal C. Particles and Fields. - : Springer Science and Business Media LLC. - 1434-6044 .- 1434-6052. ; 70:3, s. 875-916
-
Tidskriftsartikel (refereegranskat)abstract
- The ATLAS detector at the Large Hadron Collider has collected several hundred million cosmic ray events during 2008 and 2009. These data were used to commission the Muon Spectrometer and to study the performance of the trigger and tracking chambers, their alignment, the detector control system, the data acquisition and the analysis programs. We present the performance in the relevant parameters that determine the quality of the muon measurement. We discuss the single element efficiency, resolution and noise rates, the calibration method of the detector response and of the alignment system, the track reconstruction efficiency and the momentum measurement. The results show that the detector is close to the design performance and that the Muon Spectrometer is ready to detect muons produced in high energy proton-proton collisions.
|
|
| 8. |
|
|
| 9. |
|
|
| 10. |
- Aad, G., et al.
(författare)
-
Readiness of the ATLAS Tile Calorimeter for LHC collisions
- 2010
-
Ingår i: European Physical Journal C. Particles and Fields. - : Springer Science and Business Media LLC. - 1434-6044 .- 1434-6052. ; 70:4, s. 1193-1236
-
Tidskriftsartikel (refereegranskat)abstract
- The Tile hadronic calorimeter of the ATLAS detector has undergone extensive testing in the experimental hall since its installation in late 2005. The readout, control and calibration systems have been fully operational since 2007 and the detector has successfully collected data from the LHC single beams in 2008 and first collisions in 2009. This paper gives an overview of the Tile Calorimeter performance as measured using random triggers, calibration data, data from cosmic ray muons and single beam data. The detector operation status, noise characteristics and performance of the calibration systems are presented, as well as the validation of the timing and energy calibration carried out with minimum ionising cosmic ray muons data. The calibration systems' precision is well below the design value of 1%. The determination of the global energy scale was performed with an uncertainty of 4%.
|
|
