| 1. |
|
|
| 2. |
|
|
| 3. |
|
|
| 4. |
- Abadei, S., et al.
(författare)
-
Low-frequency and microwave performances of laser-ablated epitaxial Na0.5K0.5NbO3 films on high-resistivity SiO2/Si substrates
- 2002
-
Ingår i: Journal of Applied Physics. - 0021-8979. ; 91:4, s. 2267-2276
-
Tidskriftsartikel (refereegranskat)abstract
- The dielectric properties of laser-ablated 0.5-mum-thick c-axis epitaxial Na0.5K0.5NbO3 (NKN) films on high-resistivity (>7.7 kOmega cm) silicon SiO2/Si substrates are studied experimentally in the temperature interval of 30-320 K and at frequencies of 1.0 MHz-40 GHz. The films are grown by laser ablation from a stoichiometric target. For the measurements, planar 0.5-mum-thick gold electrodes (interdigital and straight slot) are photolithography defined on the top surface of NKN films. The slot width between the electrodes is 2.0 or 4.0 mum. At low frequencies (f<1.0 GHz), the structure performance is that of a typical metal-dielectric-semiconductor type, where two of this type of capacitor are connected back to back. At these frequencies, the large change in the capacitance (more than 10 times at 1.0 MHz), due to the applied dc field, is mainly due to the changes in depletion layer thickness at the surface of silicon. The associated losses are also large, tan delta>1. At microwave frequencies (f>10 GHz), the voltage dependence of the capacitance is given by the NKN film. More than a 13% capacitance change at 40 V dc bias and a Q factor of more than 15 are observed at 40 GHz, which make the structure useful for applications in electrically tunable millimeter-wave devices.
|
|
| 5. |
- Aberg, V., et al.
(författare)
-
Synthesis and absolute configuration of methyl(-)-(3R)-8-(4-bromophenyl)-7-(naphthalen-1-yl-methyl)-5-oxo-2,3-dihydro-5H-thiazolo 3,2-a pyridine-3-carboxylate
- 2002
-
Ingår i: Acta Crystallographica Section E : Structure Reports Online. - 1600-5368. ; 58, s. o812-o814
-
Tidskriftsartikel (refereegranskat)abstract
- The title molecule, C26H20BrNO3S, contains a ring-fused 2-pyridinone framework substituted with a 4-bromo-phenyl-, a naphthalen-1-ylmethyl and a methoxycarbonyl substituent. The main goal of this work was to confirm the stereochemistry for the methoxycarbonyl substituent, which proved to be 3R. Moreover, the 4-bromophenyl substituent was shown to be rotated out of the plane of the 2-pyridinone ring, with a torsion angle of 61.2 (5)degrees. To allow the best packing arrangement, the naphthalen-1-ylmethyl substituent is positioned to mediate an intermolecular pi-pi interaction.
|
|
| 6. |
- Abrahamsson, Henrik, 1972-, et al.
(författare)
-
TCP over High Speed Variable Capacity Links: : A Simulation Study for Bandwidth Allocation
- 2002
-
Ingår i: Protocols for High Speed Networks Workshop.
-
Konferensbidrag (refereegranskat)abstract
- New optical network technologies provide opportunities for fast, controllable bandwidth management. These technologies can now explicitly provide resources to data paths, creating demand driven bandwidth reservation across networks where an applications bandwidth needs can be meet almost exactly. Dynamic synchronous Transfer Mode (DTM) is a gigabit network technology that provides channels with dynamically adjustable capacity. TCP is a reliable end-to-end transport protocol that adapts its rate to the available capacity. Both TCP and the DTM bandwidth can react to changes in the network load, creating a complex system with inter-dependent feedback mechanisms. The contribution of this work is an assessment of a bandwidth allocation scheme for TCP flows on variable capacity technologies. We have created a simulation environment using ns-2 and our results indicate that the allocation of bandwidth maximises TCP throughput for most flows, thus saving valuable capacity when compared to a scheme such as link over-provisioning. We highlight one situation where the allocation scheme might have some deficiencies against the static reservation of resources, and describe its causes. This type of situation warrants further investigation to understand how the algorithm can be modified to achieve performance similar to that of the fixed bandwidth case.
|
|
| 7. |
- Ackerberg, Björn
(författare)
-
Application of some statistical methods for evaluation of groundwater observations
- 2002
-
Licentiatavhandling (övrigt vetenskapligt)abstract
- With the objective of reviewing different statisticalmethods for evaluation of groundwater data and the design of agroundwater observation network, a comprehensive literaturesurvey was performed. The literature survey focuses on spatialstatistics (geostatistics) but also includes methods toevaluate time-series of groundwater data and the determinationof the sampling frequency. A method is developed which providesa means of quantifying the accuracy of an existing groundwatermonitoring network with regards to spatial interpolation andthe locations of the corresponding observation points. Thespatial interpolation method of ordinary kriging was used. Aresult from ordinary kriging was estimated (interpolated)levels at unmeasured points, but also a kriging variance. Thekriging variance can be interpreted as a measure of theestimation accuracy and used as a criterion for network design.Design of a monitoring network for groundwater levels in anarea includes the selection of: - the number of observationpoints and - the spatial locations of observation points.The method was applied to design a monitoring network inan area in a glaciofluvial deposit, the Nybro esker, which isthe main aquifer for the water supply of the Kalmar-Nybroregion in the southeast of Sweden. This thesis shows that it ispossible to quantify the accuracy of an existing observationnetwork using the average kriging variance as a measure ofaccuracy. It is also possible to describe how this krigingvariance changes (increases) when the observation network isreduced. By using this variance is it possible to rank thedifferent points in the network as to their relativeimportance. It is thus possible to identify the points, whichare to be removed when the observation network is reduced, onepoint at a time. This study shows that a monitoring network inthe study area could be reduced by 35% while the increase inaverage estimation (kriging) variance is only about 10%.Although the method is applied to groundwater levels in aglaciofluvial deposit, it is applicable also to other variablesthat can be considered regionalized and to other geologicalenvironments.
|
|
| 8. |
- Ackermann, Thomas, et al.
(författare)
-
An overview of wind energy-status 2002
- 2002
-
Ingår i: Renewable & sustainable energy reviews. - 1364-0321. ; 6:1-2, s. 67-128
-
Forskningsöversikt (övrigt vetenskapligt)
|
|
| 9. |
- Adachi, N., et al.
(författare)
-
Magnetic properties of single crystal film Bi3Fe5O12 prepared onto Sm3(Sc, Ga)5O12(111)
- 2002
-
Ingår i: Journal of Magnetism and Magnetic Materials. - 0304-8853. ; 242:Part 2, s. 775-777
-
Tidskriftsartikel (refereegranskat)abstract
- Magnetic properties of single crystal Bi3Fe5O12 has been investigated in the temperature range between 2 and 670K. The Sm3(Sc,Ga)5O12 wafer has been used for substrates. Due to the small contribution of the substrate's magnetization, the film's magnetization can be clearly estimated to be 2040G (0K) and the Curie temperature has been estimated to be around 650K.
|
|
| 10. |
- Adiseno, et al.
(författare)
-
A wide-band RF front-end for multiband multistandard high-linearity low-IF wireless receivers
- 2002
-
Ingår i: IEEE Journal of Solid-State Circuits. - 0018-9200. ; 37:9, s. 1162-1168
-
Tidskriftsartikel (refereegranskat)abstract
- A wide-band radio-frequency (RF) front-end is designed with a balanced combined low-noise amplifier and a switching mixer (a low-noise converter) in RF Si-bipolar process with an f(T) of 25 GHz. The circuit achieves 20-dB conversion gain, higher than -4.5-dBm RF-to-IF IIP3 (+15.5-dBm OIP3) and less than 3.8-dB double-side-band noise figure in 900-MHz (e.g., GSM) and 1.9-GHz (e.g., WCDMA) frequency bands. The -1-dB compression point is -20 dBm at 13-mA dc current consumption from a single 5-V supply. The local-oscillator leakage to the input is less than -56 dBm in the 900-MHz band and less than -63 dBm in the 1.9-GHz band. The -3-dB bandwidth of the amplifier is larger than 3 GHz and a wide-band matching at the input with - 10 to -41-dB S-11 is achieved in the frequency bands of interest by applying a dual-loop wide-band active feedback. The die area is 0.69 x 0.9 mm(2). The circuit is suitable for area-efficient multiband multistandard low-IF receivers.
|
|
