| 1. |
- Laukkanen, P., et al.
(författare)
-
Anomalous bismuth-stabilized (2x1) reconstructions on GaAs(100) and InP(100) surfaces
- 2008
-
Ingår i: Physical Review Letters. - 0031-9007 .- 1079-7114. ; 100, s. 086101-
-
Tidskriftsartikel (refereegranskat)abstract
- First-principles phase diagrams of bismuth-stabilized GaAs- and InP(100) surfaces demonstrate for the first time the presence of anomalous (2 x 1) reconstructions, which disobey the common electron counting principle. Combining these theoretical results with our scanning-tunneling-microscopy and photoemission measurements, we identify novel (2 x 1) surface structures, which are composed of symmetric Bi-Bi and asymmetric mixed Bi-As and Bi-P dimers, and find that they are stabilized by stress relief and pseudogap formation.
|
|
| 2. |
- Laukkanen, P., et al.
(författare)
-
Bismuth-stabilized c(2X6) reconstruction on a InSb(100) substrate : Violation of the electron counting model
- 2010
-
Ingår i: Physical Review B. Condensed Matter and Materials Physics. - 1098-0121 .- 1550-235X .- 2469-9950 .- 2469-9969. ; 81:3
-
Tidskriftsartikel (refereegranskat)abstract
- By means of scanning tunneling microscopy/spectroscopy (STM/STS), photoelectron spectroscopy, and first-principles calculations, we have studied the bismuth (Bi) adsorbate-stabilized InSb(100) substrate surface which shows a c(2X6) low-energy electron diffraction pattern [thus labeled Bi/InSb(100)c(2X6) surface] and which includes areas with metallic STS curves as well as areas with semiconducting STS curves. The first-principles phase diagram of the Bi/InSb(100) surface demonstrates the presence of the Bi-stabilized metallic c(2X6) reconstruction and semiconducting (4X3) reconstruction depending on the chemical potentials, in good agreement with STS results. The existence of the metallic c(2X6) phase, which does not obey the electron counting model, is attributed to the partial prohibition of the relaxation in the direction perpendicular to dimer rows in the competing reconstructions and the peculiar stability of the Bi-stabilized dimer rows. Based on (i) first-principles phase diagram, (ii) STS results, and (iii) comparison of the measured and calculated STM and photoemission data, we show that the measured Bi/InSb(100)c(2X6) surface includes metallic areas with the stable c(2X6) atomic structure and semiconducting areas with the stable (4X3) atomic structure.
|
|
| 3. |
- Laukkanen, P., et al.
(författare)
-
Core-level shifts of the c(8 x 2)-reconstructed InAs(100) and InSb(100) surfaces
- 2010
-
Ingår i: Journal of Electron Spectroscopy and Related Phenomena. - : Elsevier BV. - 0368-2048 .- 1873-2526. ; 177:1, s. 52-57
-
Tidskriftsartikel (refereegranskat)abstract
- We have studied In-stabilized c(8 2)-reconstructed InAs(1 0 0) and InSb(1 0 0) semiconductor surfaces, which play a key role in growing improved III-V interfaces for electronics devices, by core-level photoelectron spectroscopy and first-principles calculations. The calculated surface core-level shifts (SCLSs) for the zeta and zeta a models, which have been previously established to describe the atomic structures of the III-V(1 00)c(8 x 2) surfaces, yield hitherto not reported interpretation for the As 3d, In 4d, and Sb 4d core-level spectra of the III-V(1 00)c(8 x 2) surfaces, concerning the number and origins of SCLSs. The fitting analysis of the measured spectra with the calculated zeta and zeta a SCLS values shows that the InSb spectra are reproduced by the zeta SCLSs better than by the zeta a SCLSs. Interestingly, the zeta a fits agree better with the InAs spectra than the zeta fits do, indicating that the zeta a model describes the InAs surface better than the InSb surface. These results are in agreement with previous X-ray diffraction data. Furthermore, an introduction of the complete-screening model, which includes both the initial and final state effects, does not improve the fitting of the InSb spectra, proposing the suitability of the initial-state model for the SCLSs of the III-V(1 0 0)c(8 x 2) surfaces. The found SCLSs are discussed with the ab initio on-site charges.
|
|
| 4. |
- Punkkinen, M. P. J., et al.
(författare)
-
Bismuth-stabilized (2x1) and (2x4) reconstructions on GaAs(100) surfaces : Combined first-principles, photoemission, and scanning tunneling microscopy study
- 2008
-
Ingår i: Physical Review B. Condensed Matter and Materials Physics. - 1098-0121 .- 1550-235X. ; 78, s. 195304-
-
Tidskriftsartikel (refereegranskat)abstract
- Bismuth adsorbate-stabilized (2x1) and (2x4) reconstructions of the GaAs(100) surfaces have been studied by first-principles calculations, valence-band and core-level photoelectron spectroscopies, and scanning tunneling microscopy. It is demonstrated that large Bi atom size leads to the formation of the pseudogap at the Fermi energy and to the lower energy of an adsorbate-derived surface band, which contributes to the stabilization of the exceptional Bi/GaAs(100)(2x1) reconstruction. It is proposed that the Bi/GaAs(100)(2x4) reconstructions include asymmetric mixed Bi-As dimers, in addition to the Bi-Bi dimers. Based on the calculations, we solve the atomic origins of the surface core-level shifts (SCLSs) of the Bi 5d photoemission spectra from the Bi/GaAs(100)(2x4) surfaces. This allows for resolving the puzzle related to the identification of two SCLS components often found in the measurements of the Bi 5d and Sb 4d core-level emissions of the Bi/III-V and Sb/III-V(100)(2x4) surfaces. Finally, the reason for the absence of the common (2x4)-beta 2 structure and additional support for the stability of the (2x1) structure on the Bi/III-V(100) surfaces are discussed in terms of Bi atom size and subsurface stress.
|
|
| 5. |
- Lang, J. J. K., et al.
(författare)
-
Tin-stabilized (1 x 2) and (1 x 4) reconstructions on GaAs(100) and InAs(100) studied by scanning tunneling microscopy, photoelectron spectroscopy, and ab initio calculations
- 2011
-
Ingår i: Surface Science. - : Elsevier BV. - 0039-6028 .- 1879-2758. ; 605:9-10, s. 883-888
-
Tidskriftsartikel (refereegranskat)abstract
- Tin (Sn) induced (1 x 2) reconstructions on GaAs(100) and InAs(100) substrates have been studied by low energy electron diffraction (LEED), photoelectron spectroscopy, scanning tunneling microscopy/spectroscopy (STM/STS) and ab initio calculations. The comparison of measured and calculated STM images and surface core-level shifts shows that these surfaces can be well described with the energetically stable building blocks that consist of Sn-III dimers. Furthermore, a new Sn-induced (1 x 4) reconstruction was found. In this reconstruction the occupied dangling bonds are closer to each other than in the more symmetric (1 x 2) reconstruction, and it is shown that the (1 x 4) reconstruction is stabilized as the adatom size increases.
|
|
| 6. |
- Kuzmin, M., et al.
(författare)
-
Atomic structure of Yb/Si(100)(2X6) : Interrelation between the silicon dimer arrangement and Si 2p photoemission line shape
- 2010
-
Ingår i: Physical Review B. Condensed Matter and Materials Physics. - 1098-0121 .- 1550-235X. ; 82:11, s. 113302-
-
Tidskriftsartikel (refereegranskat)abstract
- Combining photoelectron spectroscopy and density-functional theory calculations, we have studied the atomic geometry of Yb/Si(100)(2 X 6) reconstruction and the mechanisms responsible for its stabilization as well as the influence of this reconstruction on Si 2p core-level photoemission. The analysis of measured and calculated surface core-level shifts supports the recently proposed model of the Yb/Si(100)(2 X 6). It involves, in agreement with valence-band measurements, unbuckled (symmetrical) silicon dimers, leading to unusually narrowed Si 2p line shape as compared to those of related systems. The origin of the symmetrical dimers in the (2 X 6) structure is discussed in the context of previous results in literature.
|
|
| 7. |
- Kuzmin, M., et al.
(författare)
-
Surface core-level shifts on Ge(111)c(2 x 8) : Experiment and theory
- 2011
-
Ingår i: Physical Review B. Condensed Matter and Materials Physics. - 1098-0121 .- 1550-235X. ; 83:24, s. 245319-
-
Tidskriftsartikel (refereegranskat)abstract
- Combining high-resolution photoelectron spectroscopy and density functional theory (DFT) calculations, 3d photoemission line shape and surface core-level shifts have been reinvestigated on the Ge(111)c(2 x 8) surface. It is found that 3d spectra include, in addition to the bulk and three surface-shifted components reported in literature, a component that was not identified in earlier measurements with a lower resolution. The detailed interpretation of these spectra and their line shape is made on the basis of DFT calculations. It is shown that the lowest binding energy component is due to the rest atoms. The higher binding energy emission is caused by the adatoms and the third-layer atoms that are below the adatoms. Finally, the two other surface components originate from the first- and second-layer atoms. The screening effects in the Ge(111)c(2 x 8) are discussed.
|
|
| 8. |
- Laukkanen, P., et al.
(författare)
-
Formation and destabilization of Ga interstitials in GaAsN : Experiment and theory
- 2012
-
Ingår i: Physical Review B. Condensed Matter and Materials Physics. - 1098-0121 .- 1550-235X. ; 86:19, s. 195205-
-
Tidskriftsartikel (refereegranskat)abstract
- Using first-principles total energy calculations we have found complex defects induced by N incorporation in GaAsN. The formation energy of the Ga interstitial atom is very significantly decreased due to local effects within the defect complex. The stability of the Ga interstitials is further increased at surfaces. The present results suggest that the energetically favorable Ga interstitial atoms are much more abundant in GaAsN than the previously considered N defects, which have relatively large formation energies. Our synchrotron radiation core-level photoemission measurements support the computational results. The formation of harmful Ga interstitials should be reduced by incorporating large group IV B atoms in GaAsN.
|
|
| 9. |
- Punkkinen, Marko Patrick John, et al.
(författare)
-
Oxidized In-containing III-V(100) surfaces : Formation of crystalline oxide films and semiconductor-oxide interfaces
- 2011
-
Ingår i: Physical Review B. Condensed Matter and Materials Physics. - 1098-0121 .- 1550-235X. ; 83:19, s. 195329-
-
Tidskriftsartikel (refereegranskat)abstract
- Previously found oxidized III-V semiconductor surfaces have been generally structurally disordered and useless for applications. We disclose a family of well-ordered oxidized InAs, InGaAs, InP, and InSb surfaces found by experiments. The found epitaxial oxide-III-V interface is insulating and free of defects related to the harmful Fermi-level pinning, which opens up new possibilities to develop long-sought III-V metal-oxide-semiconductor transistors. Calculations reveal that the early stages in the oxidation process include only O-III bonds due to the geometry of the III-V(100)c(8 x 2) substrate, which is responsible for the formation of the ordered interface. The found surfaces provide a different platform to study the oxidation and properties of oxides, e. g., the origins of the photoemission shifts and electronic structures, using surface science methods.
|
|
| 10. |
- Kokko, K., et al.
(författare)
-
Surface core-level shift of Pd at the AgcPd1-c(111) surface : Nonlinear subsurface effects
- 2007
-
Ingår i: Surface Science. - : Elsevier BV. - 0039-6028 .- 1879-2758. ; 601:23, s. 5419-5423
-
Tidskriftsartikel (refereegranskat)abstract
- The surface core-level binding-energy shift (SCLS) of Pd at the AgcPd1-c(111) surface is calculated as a function of bulk concentration of the alloy. The equilibrium volume and the surface concentration profile used in the calculations refer to the 0 K case. The SCLSs are evaluated within the Z + 1 approximation. The results are analysed using the mixing enthalpy of the alloy and the bulk and surface chemical potentials. A relation of the SCLS to the bulk concentration is considered. This relation is shown to be mediated by the surface concentration profile which induces the observed nonlinear behaviour. The results are interpreted using a simple model for the alloy electronic structure.
|
|
