| 1. |
- Laukkanen, P., et al.
(författare)
-
Anomalous bismuth-stabilized (2x1) reconstructions on GaAs(100) and InP(100) surfaces
- 2008
-
Ingår i: Physical Review Letters. - 0031-9007 .- 1079-7114. ; 100, s. 086101-
-
Tidskriftsartikel (refereegranskat)abstract
- First-principles phase diagrams of bismuth-stabilized GaAs- and InP(100) surfaces demonstrate for the first time the presence of anomalous (2 x 1) reconstructions, which disobey the common electron counting principle. Combining these theoretical results with our scanning-tunneling-microscopy and photoemission measurements, we identify novel (2 x 1) surface structures, which are composed of symmetric Bi-Bi and asymmetric mixed Bi-As and Bi-P dimers, and find that they are stabilized by stress relief and pseudogap formation.
|
|
| 2. |
- Punkkinen, M. P. J., et al.
(författare)
-
Bismuth-stabilized (2x1) and (2x4) reconstructions on GaAs(100) surfaces : Combined first-principles, photoemission, and scanning tunneling microscopy study
- 2008
-
Ingår i: Physical Review B. Condensed Matter and Materials Physics. - 1098-0121 .- 1550-235X. ; 78, s. 195304-
-
Tidskriftsartikel (refereegranskat)abstract
- Bismuth adsorbate-stabilized (2x1) and (2x4) reconstructions of the GaAs(100) surfaces have been studied by first-principles calculations, valence-band and core-level photoelectron spectroscopies, and scanning tunneling microscopy. It is demonstrated that large Bi atom size leads to the formation of the pseudogap at the Fermi energy and to the lower energy of an adsorbate-derived surface band, which contributes to the stabilization of the exceptional Bi/GaAs(100)(2x1) reconstruction. It is proposed that the Bi/GaAs(100)(2x4) reconstructions include asymmetric mixed Bi-As dimers, in addition to the Bi-Bi dimers. Based on the calculations, we solve the atomic origins of the surface core-level shifts (SCLSs) of the Bi 5d photoemission spectra from the Bi/GaAs(100)(2x4) surfaces. This allows for resolving the puzzle related to the identification of two SCLS components often found in the measurements of the Bi 5d and Sb 4d core-level emissions of the Bi/III-V and Sb/III-V(100)(2x4) surfaces. Finally, the reason for the absence of the common (2x4)-beta 2 structure and additional support for the stability of the (2x1) structure on the Bi/III-V(100) surfaces are discussed in terms of Bi atom size and subsurface stress.
|
|
| 3. |
- Kuzmin, M., et al.
(författare)
-
Atomic structure of Yb/Si(100)(2X6) : Interrelation between the silicon dimer arrangement and Si 2p photoemission line shape
- 2010
-
Ingår i: Physical Review B. Condensed Matter and Materials Physics. - 1098-0121 .- 1550-235X. ; 82:11, s. 113302-
-
Tidskriftsartikel (refereegranskat)abstract
- Combining photoelectron spectroscopy and density-functional theory calculations, we have studied the atomic geometry of Yb/Si(100)(2 X 6) reconstruction and the mechanisms responsible for its stabilization as well as the influence of this reconstruction on Si 2p core-level photoemission. The analysis of measured and calculated surface core-level shifts supports the recently proposed model of the Yb/Si(100)(2 X 6). It involves, in agreement with valence-band measurements, unbuckled (symmetrical) silicon dimers, leading to unusually narrowed Si 2p line shape as compared to those of related systems. The origin of the symmetrical dimers in the (2 X 6) structure is discussed in the context of previous results in literature.
|
|
| 4. |
- Kuzmin, M., et al.
(författare)
-
Surface core-level shifts on Ge(111)c(2 x 8) : Experiment and theory
- 2011
-
Ingår i: Physical Review B. Condensed Matter and Materials Physics. - 1098-0121 .- 1550-235X. ; 83:24, s. 245319-
-
Tidskriftsartikel (refereegranskat)abstract
- Combining high-resolution photoelectron spectroscopy and density functional theory (DFT) calculations, 3d photoemission line shape and surface core-level shifts have been reinvestigated on the Ge(111)c(2 x 8) surface. It is found that 3d spectra include, in addition to the bulk and three surface-shifted components reported in literature, a component that was not identified in earlier measurements with a lower resolution. The detailed interpretation of these spectra and their line shape is made on the basis of DFT calculations. It is shown that the lowest binding energy component is due to the rest atoms. The higher binding energy emission is caused by the adatoms and the third-layer atoms that are below the adatoms. Finally, the two other surface components originate from the first- and second-layer atoms. The screening effects in the Ge(111)c(2 x 8) are discussed.
|
|
| 5. |
- Airiskallio, E., et al.
(författare)
-
High temperature oxidation of Fe-Al and Fe-Cr-Al alloys : The role of Cr as a chemically active element
- 2010
-
Ingår i: Corrosion Science. - : Elsevier BV. - 0010-938X .- 1879-0496. ; 52:10, s. 3394-3404
-
Tidskriftsartikel (refereegranskat)abstract
- Good high-temperature corrosion resistance of Fe-Al alloys in oxidizing environments is due to the alpha-Al2O3 film which is formed on the surface provided temperature is above 900 degrees C and the Al-content of the alloy exceeds the critical value. Ab initio calculations combined with experiments on Fe-13Al, Fe-18Al, Fe-23Al and Fe-10Cr-10Al alloys show that the beneficial effect of Cr on the oxidation resistance is significantly related to bulk effects. The comparison of experimental and calculated results indicates a clear correlation between the Fe-Cr chemical potential difference and the formation of the protective oxide scales. (C) 2010 Elsevier Ltd. All rights reserved.
|
|
| 6. |
- Airiskallio, E., et al.
(författare)
-
Magnetic origin of the chemical balance in alloyed Fe-Cr stainless steels : First-principles and Ising model study
- 2014
-
Ingår i: Computational materials science. - : Elsevier BV. - 0927-0256 .- 1879-0801. ; 92, s. 135-140
-
Tidskriftsartikel (refereegranskat)abstract
- Iron-chromium is the base material for most of the stainless steel grades. Recently, new insights into the origins of fundamental physical and chemical characteristics of Fe-Cr based alloys have been achieved. Some of the new results are quite unexpected and call for further investigations. The present study focuses on the magnetic contribution in the atomic driving forces related to the chemical composition in Fe-Cr when alloyed with Al, Ti, V, Mn, Co, Ni, and Mo. Using the ab initio exact muffin-tin orbitals method combined with an Ising-type spin model, we demonstrate that the magnetic moment of the solute atoms with the induced changes in the magnetic moments of the host atoms form the main factor in determining the mixing energy and chemical potentials of low-Cr Fe-Cr based alloys. The results obtained in the present work are related to the designing and tuning of the microstructure and corrosion protection of low-Cr steels.
|
|
| 7. |
- Airiskallio, E., et al.
(författare)
-
Third element effect in the surface zone of Fe-Cr-Al alloys
- 2010
-
Ingår i: Physical Review B. Condensed Matter and Materials Physics. - 1098-0121 .- 1550-235X. ; 81:3
-
Tidskriftsartikel (refereegranskat)abstract
- The third element effect to improve the high temperature corrosion resistance of the low-Al Fe-Cr-Al alloys is suggested to involve a mechanism that boosts the recovering of the Al concentration to the required level in the Al-depleted zone beneath the oxide layer. We propose that the key factor in this mechanism is the coexistent Cr depletion that helps to maintain a sufficient Al content in the depleted zone. Several previous experiments related to our study support that conditions for such a mechanism to be functional prevail in real oxidation processes of Fe-Cr-Al alloys.
|
|
| 8. |
- Delczeg-Czirjak, Erna Krisztina, 1978-, et al.
(författare)
-
Ab initio study of the elastic anomalies in Pd-Ag alloys
- 2009
-
Ingår i: Physical Review B. Condensed Matter and Materials Physics. - 1098-0121 .- 1550-235X. ; 79
-
Tidskriftsartikel (refereegranskat)abstract
- Ab initio total-energy calculations, based on the exact muffin-tin orbital method, are used to determine the elastic properties of Pd1-xAgx random alloys in the face-centered-cubic crystallographic phase. The compositional disorder is treated within the coherent-potential approximation. The single crystal and polycrystalline elastic constants and the Debye temperature are calculated for the whole range of concentration, 0 <= x <= 1. It is shown that the variation in the elastic parameters of Pd-Ag alloys with chemical composition strongly deviates from a simple linear or parabolic trend. The complex electronic origin of these anomalies is demonstrated.
|
|
| 9. |
- Kokko, K., et al.
(författare)
-
Surface core-level shift of Pd at the AgcPd1-c(111) surface : Nonlinear subsurface effects
- 2007
-
Ingår i: Surface Science. - : Elsevier BV. - 0039-6028 .- 1879-2758. ; 601:23, s. 5419-5423
-
Tidskriftsartikel (refereegranskat)abstract
- The surface core-level binding-energy shift (SCLS) of Pd at the AgcPd1-c(111) surface is calculated as a function of bulk concentration of the alloy. The equilibrium volume and the surface concentration profile used in the calculations refer to the 0 K case. The SCLSs are evaluated within the Z + 1 approximation. The results are analysed using the mixing enthalpy of the alloy and the bulk and surface chemical potentials. A relation of the SCLS to the bulk concentration is considered. This relation is shown to be mediated by the surface concentration profile which induces the observed nonlinear behaviour. The results are interpreted using a simple model for the alloy electronic structure.
|
|
| 10. |
- Kuronen, A., et al.
(författare)
-
Segregation, precipitation, and alpha-alpha ' phase separation in Fe-Cr alloys
- 2015
-
Ingår i: Physical Review B. Condensed Matter and Materials Physics. - : American Physical Society. - 1098-0121 .- 1550-235X. ; 92:21
-
Tidskriftsartikel (refereegranskat)abstract
- Iron-chromium alloys, the base components of various stainless steel grades, have numerous technologically and scientifically interesting properties. However, these features are not yet sufficiently understood to allow their full exploitation in technological applications. In this work, we investigate segregation, precipitation, and phase separation in Fe-Cr systems analyzing the physical mechanisms behind the observed phenomena. To get a comprehensive picture of Fe-Cr alloys as a function of composition, temperature, and time the present investigation combines Monte Carlo simulations using semiempirical interatomic potential, first-principles total energy calculations, and experimental spectroscopy. In order to obtain a general picture of the relation of the atomic interactions and properties of Fe-Cr alloys in bulk, surface, and interface regions several complementary methods have to be used. Using the exact muffin-tin orbitals method with the coherent potential approximation (CPA-EMTO) the effective chemical potential as a function of Cr content (0-15 at. % Cr) is calculated for a surface, second atomic layer, and bulk. At similar to 10 at. % Cr in the alloy the reversal of the driving force of a Cr atom to occupy either bulk or surface sites is obtained. The Cr-containing surfaces are expected when the Cr content exceeds similar to 10 at. %. The second atomic layer forms about a 0.3 eV barrier for the migration of Cr atoms between the bulk and surface atomic layer. To get information on Fe-Cr in larger scales we use semiempirical methods. However, for Cr concentration regions less than 10 at. %, the ab initio (CPA-EMTO) result of the important role of the second atomic layer to the surface is not reproducible from the large-scale Monte Carlo molecular dynamics (MCMD) simulation. On the other hand, for the nominal concentration of Cr larger than 10 at. % the MCMD simulations show the precipitation of Cr into isolated pockets in bulk Fe-Cr and the existence of the upper limit of the solubility of Cr into Fe layers in Fe/Cr layer systems. For high Cr concentration alloys the performed spectroscopic measurements support the MCMD simulations. Hard x-ray photoelectron spectroscopy and Auger electron spectroscopy investigations were carried out to explore Cr segregation and precipitation in the Fe/Cr double layer and Fe0.95Cr0.05 and Fe0.85Cr0.15 alloys. Initial oxidation of Fe-Cr was investigated experimentally at 10(-8) Torr pressure of the spectrometers showing intense Cr2O3 signal. Cr segregation and the formation of Cr-rich precipitates were traced by analyzing the experimental atomic concentrations and chemical shifts with respect to annealing time, Cr content, and kinetic energy of the exited electron.
|
|
