SwePub
Sök i SwePub databas

  Utökad sökning

Träfflista för sökning "WFRF:(Fröling Morgan 1966 ) ;conttype:(scientificother)"

Sökning: WFRF:(Fröling Morgan 1966 ) > Övrigt vetenskapligt/konstnärligt

  • Resultat 1-10 av 70
Sortera/gruppera träfflistan
   
NumreringReferensOmslagsbildHitta
1.
  • Akambih Tajam, Joseph, et al. (författare)
  • SMALL SCALE IN-SITU BIOREMEDIATIONOF DIESEL CONTAMINATED SOIL –SCREENING LIFE CYCLE ASSESSMENT OF ENVIRONMENTAL PERFORMANCE
  • 2010
  • Ingår i: ECO-TECH´10, 22-24 November 2010, Kalmar, Sweden. ; , s. 827-835
  • Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
    • Spillage of diesel oil and other petroleum products is a commonly creating need for siteremediation of contaminated soils. In Sweden the most common remediation action isexcavation of the contaminated soil and off site biological treatment by composting.However, a number of small sites spread out in rural areas end up low on priority lists, andwill not be attended to within foreseeable future if ever. For such areas a low cost, easy toapply remediation techniques would be of interest. Enhanced bioremediation of dieselcontaminants in soil by whey addition has been demonstrated in lab scale. Whey is a byproductfrom cheese production. A first pilot remediation trial on an actual site in Gäddede,County of Jämtland, was started the summer of 2010. Using this site as a case study ascreening life cycle assessment model has been set up. The goal of the study was toinvestigate the environmental performance of the whey method, to benchmark the wheymethod toward the excavation and composting practice and to identify environmental hotspots in the whey treatment life cycle. The study aims at establishing if further work shouldbe put into developing the method, or if the environmental performance is such that the wheymethod should be abandoned. It should be noted that even with a slightly worseenvironmental performance compared to other remediation alternatives whey treatment couldstill be of interest, since the small scale sites in rural areas we talk about here otherwise mostoften would not be attended to.Results from the screening life cycle assessment indicate a rather good environmentalperformance of the whey method, partly depending on impact category considered. For thewhey method, impacts from farming activities in the milk production chain allocated to thewhey give significant contributions. Transportation gives important impacts from both thewhey method and the excavation and off site composting, thus logistics should always beconsidered and optimized. The whey on-site treatment could be an interesting alternative forbioremediation especially at sites that would not otherwise be treated, due to small size orremote location.
  •  
2.
  • Arvidsson, Rickard, 1984, et al. (författare)
  • Assessing the Environmental Impacts of Palm Oil
  • 2011
  • Ingår i: Palm Oil: Nutrition, Uses and Impacts. - : Nova Science Publishers, Inc.. - 9781612099217 ; , s. 159-186
  • Bokkapitel (övrigt vetenskapligt/konstnärligt)abstract
    • Palm oil is used for cooking in Southeast Asia and Africa and as a food additive in a number of processed foods world-wide. The production of palm oil is increasing, and it is of special interest from a nutritional point of view due to its high energy content and its significant content of micronutrients. In addition, palm oil is increasingly used to produce various biofuels. Due to large production volumes and diverse applications of palm oil, it is highly interesting and important to study the environmental impacts of its production. This chapter discusses how the environmental impacts of palm oil can be assessed, focusing on the life cycle environmental impacts of palm oil in comparison to similar products. A brief overview of life cycle assessment as a method is given, and results are presented together with suggestions for environmental improvements of palm oil cultivation and production. It is shown that the magnitude of the environmental impacts connected to palm oil in relation to other products is heavily affected by the choice of environmental indicators, which in LCA studies consist of both an environmental impact category and a so-called functional unit. Regarding impact categories, the global warming and acidification potentials of palm oil are lower than those of rapeseed oil per kg oil. The water footprint of palm oil and rapeseed oil are about the same on a mass basis, but for the two land use indicators soil erosion and heavy metal accumulation, rapeseed oil has a lower impact than palm oil. Specific interest is given to the life cycle energy use of palm oil in response to the unclear and diverse definitions of this impact category in different studies. It is concluded that there is a need to carefully define the energy use impact category when reporting on palm oil or similar products, and also to differentiate between different kinds of energy sources. If instead of mass the micronutrient content is applied as functional unit, palm oil still has lower global warming potential and acidification than rapeseed oil when compared on the basis of vitamin E content. However, if β-carotene content is used as functional unit, rapeseed oil is not relevant for comparison due to its negligible content of β-carotene. For that case, palm oil is therefore instead compared to tomatoes on a β-carotene basis, since tomatoes are rich in β-carotene. The tomatoes were shown to perform better then palm oil regarding global warming potential on a β-carotene basis. The effects of time and scale on the environmental impacts of palm oil, which includes changes in technical performance and electricity sources, are also discussed in this chapter. It is shown that combustion of the methane formed from the palm oil mill effluent can significantly reduce the global warming potential.
  •  
3.
  • Arvidsson, Rickard, 1984, et al. (författare)
  • How do we know the energy use when producing biomaterials or biofuels?
  • 2012
  • Ingår i: Proceedings of ECO-TECH 2012.
  • Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
    • How much fossil energy that is used in the production of biomaterials or biofuels (e.g. fuel used in harvesting) is a parameter of obvious interest when optimizing the production systems. To use more fossil fuels in the production of a biofuel than what will be available as the biofuel product is obviously a bad idea. With increasing interest in biomaterials and biofuels, a shift from a sole focus on fossil energy will be necessary. Optimized use of energy over the whole life cycle is one important parameter to ensure sustainability. However, to report and interpret values on life cycle energy use is not as straight forward as what might immediately be perceived. The impact category ‘energy use’ is frequently used but is generally not applied in a transparent and consistent way between different studies. Considering the increased focus on biofuels, it is important to inform companies and policy-makers about the energy use of biofuels in relevant and transparent ways with well-defined indicators. The present situation in how energy use indicators are applied was studied in a set of LCA studies of biofuels. It was found that the choice of indicator was seldom motivated or discussed in the examined reports and articles, and five inherently different energy use indicators were observed: (1) fossil energy, (2) secondary energy, (3) cumulative energy demand (primary energy), (4) net energy balance, and (5) total extracted energy. As a test, we applied these five energy use indicators to the same cradle-to-gate production system and they give considerably different output numbers of energy use. This in itself is not unexpected, but indicates the importance of clearly identifying, describing and motivating the choice of energy use indicator. Direct comparisons between different energy use results could lead to misinformed policy decisions.
  •  
4.
  • Arvidsson, Rickard, 1984, et al. (författare)
  • Life cycle assessment of Biodiesel - Hydrotreated oil from rape, oil palm or Jatropha
  • 2008
  • Ingår i: Annual Poster Exhibition at the Department of Chemical and Biological Engineering, Chalmers University of Technology, Mars 6th, 2008, Göteborg, Sweden.
  • Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
    • There is a need for fuels based on renewable resources that have acceptable emission profiles and that are functional for truck engines used in heavy vehicles. Volvo has participated in the CONCAWE/EUCAR/JRC WTW study, which analyzed a number of candidate fuels, several process routes to produce each fuel as well as different raw material choices. However, the CONCAWE study did not include any second generation hydrogenated vegetable oil type biodiesel. In the present study, Volvo and Chalmers investigate and benchmark hydrogenated vegetable oils. Different production routes from different proposed raw materials are investigated using life cycle assessment modeling. Raw materials considered are oil from rape seed (grown in Germany), palm oil (grown in Malaysia) and oil from the fruits of Jatropha curcas (grown in India). The raw material is converted into hydrogenated oil at a production site in northern Europe and used at the European market. Results regarding life cycle global warming potential and energy use are presented.
  •  
5.
  • Arvidsson, Rickard, 1984, et al. (författare)
  • Towards transparent and relevant use of energy use indicators in LCA studies of biofuels
  • 2012
  • Ingår i: 6th SETAC World Congress / SETAC Europe 22nd Annual Meeting in Berlin.
  • Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
    • The use of energy has led to resource crises during the history of mankind, such as the deforestation of the Mediterranean during antiquity, and of Great Britain before the 19th century, and the oil crisis in the 20th century and continuing. Considering this, the frequent use of the impact category ‘energy use’ in the environmental assessment tool life cycle assessment (LCA) is not surprising. However, in a previous study, some of the authors noted that the term ‘energy use’ was not applied in a transparent and consistent way in LCA studies of biofuels. In this work we investigate how energy use indicators are applied in a set of life cycle assessment (LCA) studies of biofuels. In the examined reports and articles, the choice of indicator was seldom motivated or discussed and we observed five inherently different energy use indicators: (1) fossil energy, (2) secondary energy, (3) cumulative energy demand, (4) net energy balance, and (5) total extracted energy. These five energy use indicators were applied to the same cradle-to-gate production system of palm oil methyl ester (PME), giving considerably different output results. This is in itself not unexpected, but indicates the importance of clearly identifying, describing and motivating the choice of energy use indicator. All five indicators can all be useful in specific situations, depending on the goal and scope of the individual study, but the choice of indicators need to be better reported and motivated than what is generally done today. Authors of LCA studies should first define the purpose of their energy use indicator (fossil scarcity, energy scarcity, energy efficiency, cost/benefit comparison) and may then make a motivated choice of the energy use indicator.
  •  
6.
  • Clancy, Gunilla, 1968, et al. (författare)
  • Actionable knowledge to develop more sustainable products
  • 2013
  • Ingår i: 6th International Conference on Life Cycle Management, Göteborg, 25-28 August.
  • Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
    • Companies need to develop more sustainable products to fit into more sustainable future markets, and there is need for ways to guide towards and compare sustainability already early in material or product development. How this can be handled has been studied through action research in a material development project aiming to develop wood-based materials to replace petroleum-based materials while ensuring a more sustainable product. A specific focus was put on creating actionable knowledge to facilitate innovation towards more sustainable products by translating and integrating significant product sustainability characteristics into each team member’s specific area of expertise and everyday work. The insights are now used in different other on-going projects in a textile industry setting and in relation to companies’ management systems.
  •  
7.
  •  
8.
  • Clancy, Gunilla, 1968, et al. (författare)
  • Approach to establish relevant sustainability assessment parameters in product development
  • 2011
  • Ingår i: Poster presentation at the Second Symposium on Industrial Ecology for Young Professionals, 11 June 2011, Berkeley, California.
  • Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
    • Since companies need to develop more sustainable products to stay in business in the long term, there is a demand for ways to assess and compare product sustainability already in product development. This is studied through action research performed within the “wood based diaper” material development project (WooDi) aiming to develop a wood based material to replace a petroleum based while ensuring a more sustainable product. Methods used so far evaluating environmental product development to a large extend is based on optimization of the present system (improving or replacing parts giving large impacts) or to some extent taking the future into account e.g. by consequential LCA studies. Such approaches will result in marginal improvements of the present situation, but don’t fully take advantage of truly innovative processes or the fact that a more sustainable future society might put very different demands on products compared to the strictest requirements of today. Based on what was found in relevant literature, most often lists of predetermined parameters are being used without critical reflection on their importance in light of the specific situation. There is a specific lack of parameters describing the sustainability impacts of a shift from fossil to biomass resources in a life cycle perspective, e.g. related to competition for resources. As a result, an approach for establishing relevant product sustainability parameters is presented, emphasising the need to bringing in the diverse knowledge and experiences of the product development team members as vital for a successful result. The parameters are intended to guide product development as well as to be a base for a sustainability comparison of a new product with a current product.
  •  
9.
  • Clancy, Gunilla, 1968, et al. (författare)
  • Approach to establish relevant sustainability assessment parameters in product development
  • 2011
  • Ingår i: Poster presentation at the 6th International Conference on Industrial Ecology 'Science, Systems and Sustainablity' 7-10 June 2011, Berkeley, California.
  • Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
    • Since companies need to develop more sustainable products to stay in business in the long term, there is a demand for ways to assess and compare product sustainability already in product development. This is attended to in the WooDi research project which aims at developing a wood based material to replace a petroleum based one in an incontinence diaper while ensuring a more sustainable product. Acknowledging the vast number of choices made in product development and their potentially large effect on the sustainability impact of the resulting product leads to the conclusion that assessment of product sustainability should be made throughout the process and be used to guide development. To gain a deeper understanding of the requirements and barriers in assessing product sustainability and guiding product development towards a more sustainable product, several workshops and seminars were carried out in the WooDi project, in parallel to literature surveys. Based on what was found in relevant literature, most often lists of predetermined parameters are being used without critical reflection on their importance in light of the specific situation. Additionally there is a lack of parameters describing the sustainability impacts of a shift from fossil to biomass resources in a life cycle perspective, e.g. related to competition for resources. As a result, an approach was developed for establishing relevant product sustainability parameters, where the parameters are intended to guide product development as well as to be a base for a sustainability comparison of a new product with a current product. It starts with defining what ‘sustainable product’ is in the specific case.This approach emphasises the need of bringing in the product development team members’ diverse knowledge and experiences as vital for a successful result. Practical experience of using the proposed framework throughout a project is still needed for evaluating it and identifying its limits.The presentation reports on the developed approach and on efforts to define what should be meant by ‘sustainable product’ in the specific case.
  •  
10.
  • Clancy, Gunilla, 1968, et al. (författare)
  • Comparing the sustainability of using a non-renewable oil based material in an absorbent hygiene product with that of using a renewable wood based material
  • 2009
  • Ingår i: Poster presentation at the Eforwood conference 'Shape your sustainability tools - and let your tools shape you', 23-24 September 2009, Uppsala, Sweden. ; , s. 2-3
  • Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
    • The WooDi project – the Wood based Diaper, is a research collaboration between industry and university. The goal of the project is to make a new diaper that is more sustainable than today’s product, by replacing non-renewable North Sea oil based materials in the diaper with a renewable material based on wood from the Nordic countries. This calls for a way to compare the sustainability associated with using the different raw materials.Comparisons of the implications of using crude oil and biomass resources have so far mainly been made for fuels used in transportation. The available literature assessing the use of fossil fuels versus bio-fuels focuses primarily on greenhouse gas emissions, often referred to as the carbon footprint [1]. It does not include, e.g., effects on ecosystem quality, employment, economy, etc. The increased use of bio-fuels for transportation is discussed in relation to food and feed grain prices, as well as negative environmental impacts arising from deforestation and land conversion, as food and fuel compete for scarce land resources [2, 3].Some life cycle impact assessment (LCIA) weighting methods include resource use, but are generally based on only one or a few parameters. One example is the monetary values used by the environmental priority strategies (EPS) method [4], which involves a weighting for renewable and non-renewable resources based on the cost of producing an equivalent from renewable resources.For forestry there are several voluntary sustainable forest management (SFM) systems, e.g., Forest Stewardship Council (FSC) certification and the Programme for the Endorsement of Forest Certification (PEFC) scheme. Requirements within such systems include a broader set of aspects than greenhouse gas emissions or available LCIA weighting methods. The SFM laboratory [5] suggests eight different sustainability criteria such as the maintenance of ecosystem health and vitality; cultural, social and spiritual needs and values and maintenance of the forests’ contribution to global carbon cycles. No comparable sustainable management criteria have been found for fossil oil extraction and use, other than an initiative with recommendations on how to include biodiversity into strategies for oil and gas development [6].Consequently, there exists no readily available method for comparing the sustainability of using North Sea oil and Nordic wood as raw materials. The methods mentioned above can be a starting point but need to be developed further. The method development work carried out in the WooDi project should also be useful for other sustainability assessments comparing forest and fossil resources.References1. Johnson, E. Biofuel vs petrofuel carbon footprints: it’s about the land, in SETAC Europe 14th LCA Case Study Symposium. 2007. Göteborg.2. Early, J. and A. McKeown, Smart Choices for Biofuels. 2009, Sierra Club, Worldwatch Institute, Washington.3. Banse, M., P. Nowicki, and H.v. Meijl, Why are current world food prices so high? 2008, LEI Wageningen UR, Wageningen, The Netherlands.4. Steen, B., A systematic approach to environmental priority strategies in product development (EPS). Version 2000 - General System Characteristics, 1999.5. Sustainable forest management - indicator knowledge base. [cited 6th April 2009]. Available from: www.sfmindicators.org.6. Integrating Biodiversity Conservation into Oil & Gas Development, 2003.Acknowledgements Financial support from Vinnova, SCA Hygiene Products AB and Södra Cell AB is greatly appreciated.
  •  
Skapa referenser, mejla, bekava och länka
  • Resultat 1-10 av 70
Typ av publikation
konferensbidrag (58)
rapport (4)
bokkapitel (4)
bok (1)
tidskriftsartikel (1)
doktorsavhandling (1)
visa fler...
licentiatavhandling (1)
visa färre...
Typ av innehåll
Författare/redaktör
Fröling, Morgan, 196 ... (69)
Svanström, Magdalena ... (32)
Clancy, Gunilla, 196 ... (14)
Grönlund, Erik (9)
Arvidsson, Rickard, ... (7)
Tester, Jefferson W. (6)
visa fler...
Fransson, Kristin, 1 ... (5)
Ramnäs, Olle Jerker, ... (4)
Molander, Sverker, 1 ... (3)
Dalenbäck, Jan-Olof, ... (3)
Fakhari Rad, Mohamma ... (3)
Jonsson, Anders (2)
Klintbom, Patrik (2)
Persson, Sara, 1984 (2)
Jozsa, Peter (2)
Westlund, Rolf (2)
van den Brink, Paul, ... (2)
Grönlund, Erik, 1964 ... (2)
Carlman, Inga (2)
Persson, Camilla, 19 ... (2)
Carlsson, Elisabeth, ... (2)
Tellström, Susanne, ... (2)
Lorentzen, Lena (1)
Fahlén, Per, 1947 (1)
van den Brink, Paul (1)
Luterbacher, Jeremy ... (1)
Peters, Gregory, 197 ... (1)
Ahlgren, Erik, 1962 (1)
Drakare, Stina (1)
Hedin, Daniel (1)
Akambih Tajam, Josep ... (1)
Alänge, Sverker, 195 ... (1)
Erlandsson, Martin (1)
Ståhl, Fredrik (1)
Werner, Sven, 1952- (1)
Molander, Sverker (1)
Bengtsson, Hans (1)
Danielski, Itai (1)
Lindblom, Erik (1)
Berg, Per Eo, 1949 (1)
Bialik, Marta Anna, ... (1)
Jönsson, Johan (1)
Werner, Sven (1)
Riise, Ellen (1)
Nyström, Ingrid (1)
Longueville, Anna (1)
Lindholm, Torbjörn, ... (1)
Peters, Gregory M., ... (1)
Riise, Ellen, 1960 (1)
Svensson, Michelle (1)
visa färre...
Lärosäte
Chalmers tekniska högskola (46)
Mittuniversitetet (32)
Örebro universitet (1)
Språk
Engelska (66)
Svenska (4)
Forskningsämne (UKÄ/SCB)
Teknik (54)
Naturvetenskap (39)
Samhällsvetenskap (4)
Lantbruksvetenskap (2)
Humaniora (1)

År

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

 
pil uppåt Stäng

Kopiera och spara länken för att återkomma till aktuell vy