SwePub
Sök i SwePub databas

  Utökad sökning

Träfflista för sökning "swepub ;pers:(Larsson Anders);conttype:(refereed);pers:(Hurtig Tomas);pers:(Appelgren Patrik);spr:eng;pers:(Skoglund Melker)"

Sökning: swepub > Larsson Anders > Refereegranskat > Hurtig Tomas > Appelgren Patrik > Engelska > Skoglund Melker

  • Resultat 1-4 av 4
Sortera/gruppera träfflistan
   
NumreringReferensOmslagsbildHitta
1.
  • Appelgren, Patrik, et al. (författare)
  • Experimental Study of Electromagnetic Effects on Solid Copper Jets
  • 2010
  • Ingår i: Journal of applied mechanics. - : ASME International. - 0021-8936 .- 1528-9036. ; 77:1, s. 011010-
  • Tidskriftsartikel (refereegranskat)abstract
    • In this paper we present a study of the interaction between all electric current pulse and a solid copper jet. Experiments were performed using a dedicated pulsed power supply delivering a current pulse of such amplitude, rise little, and duration that the jet is efficiently affected. The copper jet was created by using a shaped charge warhead. All electrode configuration consisting of two aluminum plates with a separation distance of 150 mm was used. The discharge current pulse and the voltages at the capacitors and at the electrodes were measured to obtain data oil energy deposition in and the resistance of the jet and electrode contact region. X-ray diagnostics were used to radiograph the jet, and by analyzing the radiograph, the degree of disruption of the electrified jet could be obtained. It was found that a current pulse with an amplitude of 200-250 kA and a rise time of 16 mu s could strongly enhance the natural fragmentation of the jet. In this case, the initial electric energy was 100 kJ and about 90% of the electric energy was deposited in the jet and electrodes. At the exit of the electrode region, the jet fragments formed rings with a radial velocity of up to 200 m/s, depending oil the initial electric energy in the pulsed power supply. [DOI: 10.1115/1.3172251]
  •  
2.
  • Appelgren, Patrik, et al. (författare)
  • Interaction between solid copper jets and powerful electrical current pulses
  • 2011
  • Ingår i: Journal of applied mechanics. - : ASME International. - 0021-8936 .- 1528-9036. ; 78:2
  • Tidskriftsartikel (refereegranskat)abstract
    • The interaction between a solid copper jet and an electric current pulse is studied. Copper jets that were created by a shaped-charge device were passed through an electrode configuration consisting of two aluminum plates with a separation distance of 150 mm. The electrodes were connected to a pulsed-power supply delivering a current pulse with amplitudes up to 250 kA. The current and voltages were measured, providing data on energy deposition in the jet and electrode contact region, and flash X-ray diagnostics were used to depict the jet during and after electrification. The shape of, and the velocity distributions along, the jet has been used to estimate the correlation between the jet mass flow through the electrodes and the electrical energy deposition. On average, 2.8 kJ/g was deposited in the jet and electrode region, which is sufficient to bring the jet up to the boiling point. A model based on the assumption of a homogenous current flow through the jet between the electrodes underestimates the energy deposition and the jet resistance by a factor 5 compared with the experiments, indicating a more complex current flow through the jet. The experimental results indicate the following mechanism for the enhancement of jet breakup. When electrified, the natural-formed necks in the jet are subjected to a higher current density compared with other parts of the jet. The higher current density results in a stronger heating and a stronger magnetic pinch force. Eventually, the jet material in the neck is evaporated and explodes electrically, resulting in a radial ejection of vaporized jet material.
  •  
3.
  • Appelgren, Patrik, et al. (författare)
  • Disruption mechanisms in electrified solid copper jets
  • 2011
  • Ingår i: Journal of applied mechanics. - : ASME International. - 0021-8936 .- 1528-9036. ; 78:2
  • Tidskriftsartikel (refereegranskat)abstract
    • Interaction between a solid copper jet and an electric current pulse is a complex process that has been experimentally studied by letting a jet created by a shaped charge device pass through an electrode configuration consisting of two aluminum plates with a separation distance of 150 mm. When the jet bridged the electrodes, which are connected to a charged pulsed power supply, current pulses with amplitude up to 250 kA were passed through the jet. By using flash X-ray diagnostics, the disruption of the electrified jets could be studied. In this paper, the disruption of the electrified jets is discussed and compared with disruption phenomena observed in electrically exploded metal rods in a static setup. Necks are naturally formed along a stretching jet, and in the experiments with current interaction these necks explode electrically. In the static experiments, the metal rods have small notches distributed along the rod to resemble the necks of the jet. When two neighboring necks or notches explode, the shock of the explosion compresses the intermediate jet or rod segment axially and the material is forced out radially. The disruption phenomena in the jet and rod experiments are similar with rapid expansion of the metal at explosion and at comparable velocities.
  •  
4.
  •  
Skapa referenser, mejla, bekava och länka
  • Resultat 1-4 av 4
Typ av publikation
tidskriftsartikel (3)
konferensbidrag (1)
Typ av innehåll
Författare/redaktör
Westerling, Lars (4)
Lundberg, Patrik (4)
visa fler...
Carlsson, Torgny E. (1)
Helte, Andreas (1)
visa färre...
Lärosäte
Kungliga Tekniska Högskolan (4)
Uppsala universitet (2)
Språk
Forskningsämne (UKÄ/SCB)
Teknik (3)

År

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

 
pil uppåt Stäng

Kopiera och spara länken för att återkomma till aktuell vy