| 1. |
- Sepehri, Sobhan, 1986, et al.
(författare)
-
Volume-amplified magnetic bioassay integrated with microfluidic sample handling and high-Tc SQUID magnetic readout
- 2018
-
Ingår i: APL Bioengineering. - : AIP Publishing. - 2473-2877. ; 2:1
-
Tidskriftsartikel (refereegranskat)abstract
- A bioassay based on a high-Tc superconducting quantum interference device (SQUID) reading out functionalized magnetic nanoparticles (fMNPs) in a prototype microfluidic platform is presented. The target molecule recognition is based on volume amplification using padlock-probe-ligation followed by rolling circle amplification (RCA). The MNPs are functionalized with single-stranded oligonucleotides, which give a specific binding of the MNPs to the large RCA coil product, resulting in a large change in the amplitude of the imaginary part of the ac magnetic susceptibility. The RCA products from amplification of synthetic Vibrio cholera target DNA were investigated using our SQUID ac susceptibility system in microfluidic channel with an equivalent sample volume of 3 μl. From extrapolation of the linear dependence of the SQUID signal versus concentration of the RCA coils, it is found that the projected limit of detection for our system is about 1.0 e5 RCA coils (0.2e−18 mol), which is equivalent to 66 fM in the 3 μl sample volume. This ultra-high magnetic sensitivity and integration with microfluidic sample handling are critical steps towards magnetic bioassays for rapid detection of DNA and RNA targets at the point of care.
|
|
| 2. |
- Zambrano, Jesús, et al.
(författare)
-
Optimal steady-state design of zone volumes of bioreactors with Monod growth kinetics
- 2015
-
Ingår i: Biochemical Engineering Journal. - : Elsevier BV. - 1369-703X .- 1873-295X. ; 100, s. 59-66
-
Tidskriftsartikel (refereegranskat)abstract
- This paper deals with steady-state analysis and design of bioreactors consisting of a number of completely stirred tank reactors (CSTRs) in series. The study is confined to one consumed (substrate) and one consuming constituent (biomass). The specific microbial growth rate is assumed to be described by Monod kinetics. The death of biomass is assumed to be negligible. Two optimal design problems for a large number of CSTRs in series are studied: to minimize the effluent substrate concentration for a given total volume, and to minimize the total volume for a given effluent substrate concentration. As an appealing alternative to solve these problems numerically, it is proposed to consider the asymptotic case where the number of CSTRs tends to infinity. This is shown to correspond to one CSTR in series with a plug flow reactor (PFR). A CSTR with a sufficient large volume is needed to avoid wash-out of the biomass. The main result is that both design problems for the CSTR + PFR configuration have the same solution with respect to the optimal volume of the CSTR, which is given as an explicit function of the incoming substrate concentration, the volumetric flow rate and the coefficients of the Monod growth rate function. Numerical results indicate that the plug flow approach may be used as a feasible design procedure even for a reasonably low number of CSTRs in series.
|
|
| 3. |
|
|
| 4. |
- Öhman, Sebastian, 1991-, et al.
(författare)
-
Selective kinetic growth and role of local coordination in forming Al2TiO5-based coatings at lower temperatures
- 2021
-
Ingår i: Materials Advances. - : Royal Society of Chemistry. - 2633-5409. ; 2:17, s. 5737-5751
-
Tidskriftsartikel (refereegranskat)abstract
- Negative thermal expansion is an elusive property found among certain materials, whose potential applications have remained limited due to the many challenges faced in their synthesis. Herein, we report the successful formation of aluminium titanate-based coatings (Al2TiO5), a material renowned for its low-to-negative thermal expansion, by the co-deposition of aluminium-isopropoxide and titanium-isopropoxide in a hot-wall chemical vapour deposition instrument. While coatings grown at 450 °C were amorphous as-deposited, a short-range order into the Al2TiO5-phase was found and analysed by using Raman spectroscopy. Upon subsequent annealing at 700 °C for 3 hours, crystalline coatings were achieved without forming any binary phases. The selective synthesis of the Al2TiO5 phase is ascribed to the precursors’ inherent chemical similarities, resulting in a kinetic targeting of this phase and a short-range homogeneity, entailing its preferred crystallisation. The role of local coordination is expressed by demonstrating the formation of intergrowth phases ascribed to lower coordinating interstices in the compound. Both the formation and crystallisation temperatures reported herein, as well as the timescales needed for the synthesises, are considerably lower than any conventional adopted solid-state techniques used so far to attain the Al2TiO5 phase.
|
|
| 5. |
- Hägglund, Carl, 1975, et al.
(författare)
-
Plasmonic Near-Field Absorbers for Ultrathin Solar Cells
- 2012
-
Ingår i: Journal of Physical Chemistry Letters. - : American Chemical Society (ACS). - 1948-7185. ; 3:10, s. 1275-1285
-
Forskningsöversikt (refereegranskat)abstract
- If the active layer of efficient solar cells could be made 100 times thinner than in today's thin film devices, their economic competitiveness would greatly benefit. However, conventional solar cell materials do not have the optical capability to allow for such thickness reductions without a substantial loss of light absorption. To address this challenge, the use of plasmon resonances in metal nanostructures to trap light and create charge carriers in a nearby semiconductor material is an interesting opportunity. In this Perspective, recent progress with regards to ultrathin (similar to 10 nm) plasmonic nanocomposites is reviewed. Their optimal internal geometry for plasmon near-field induced absorption is discussed, and a zero thickness effective medium representation is used to optimize stacks including an Al back reflector for photovoltaics. This shows that high conversion efficiencies (>20%) are possible even when taking surface scattering effects and thin passivating layers inserted between the metal and semiconductor into account.
|
|
| 6. |
- Jeong, Seung Hee, 1978-
(författare)
-
Soft Intelligence : Liquids Matter in Compliant Microsystems
- 2016
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Soft matter, here, liquids and polymers, have adaptability to a surrounding geometry. They intrinsically have advantageous characteristics from a mechanical perspective, such as flowing and wetting on surrounding surfaces, giving compliant, conformal and deformable behavior. From the behavior of soft matter for heterogeneous surfaces, compliant structures can be engineered as embedded liquid microstructures or patterned liquid microsystems for emerging compliant microsystems.Recently, skin electronics and soft robotics have been initiated as potential applications that can provide soft interfaces and interactions for a human-machine interface. To meet the design parameters, developing soft material engineering aimed at tuning material properties and smart processing techniques proper to them are to be highly encouraged. As promising candidates, Ga-based liquid alloys and silicone-based elastomers have been widely applied to proof-of-concept compliant structures.In this thesis, the liquid alloy was employed as a soft and stretchable electrical and thermal conductor (resistor), interconnect and filler in an elastomer structure. Printing-based liquid alloy patterning techniques have been developed with a batch-type, parallel processing scheme. As a simple solution, tape transfer masking was combined with a liquid alloy spraying technique, which provides robust processability. Silicone elastomers could be tunable for multi-functional building blocks by liquid or liquid-like soft solid inclusions. The liquid alloy and a polymer additive were introduced to the silicone elastomer by a simple mixing process. Heterogeneous material microstructures in elastomer networks successfully changed mechanical, thermal and surface properties.To realize a compliant microsystem, these ideas have in practice been useful in designing and fabricating soft and stretchable systems. Many different designs of the microsystems have been fabricated with the developed techniques and materials, and successfully evaluated under dynamic conditions. The compliant microsystems work as basic components to build up a whole system with soft materials and a processing technology for our emerging society.
|
|
| 7. |
- Pérez-Penichet, Carlos, et al.
(författare)
-
Poster abstract : Augmenting WSNs with interoperable 802.15.4 sensor tags
- 2017
-
Ingår i: SenSys 2017 - Proceedings of the 15th ACM Conference on Embedded Networked Sensor Systems. - New York, NY, USA : Association for Computing Machinery, Inc. - 9781450354592
-
Konferensbidrag (refereegranskat)abstract
- The sensing capabilities of most sensor networks are fixed at the time of deployment. Adding new sensing capabilities to such networks is a costly and cumbersome process. We present Passive Sensor Tags, battery-free sensing devices that could be used to extend the sensing capabilities of an existing network. Sensor tags feature our new 802.15.4 receiver design which is suitable for micro-power operation, making battery-free tags possible. Because our tags can both transmit and receive 802.15.4 frames there is no need for any modification to the deployed hardware. We present preliminary measurements of transmission and reception range.
|
|
| 8. |
- Halvarsson, Björn, et al.
(författare)
-
A New Input/Output Pairing Strategy based on Linear Quadratic Gaussian Control
- 2009
-
Ingår i: Proc. 7th IEEE International Conference on Control and Automation, Dec. 9-11, Christchurch, New Zealand. - Piscataway, NJ : IEEE. - 9781424447060 ; , s. 978-982
-
Konferensbidrag (refereegranskat)abstract
- In this paper a new input/output pairing strategy based on linear quadratic Gaussian control (LQG) is suggested. The strategy is used to compare the expected performance of decentralized control structures in some illustrative examples. The pairing suggestions are compared with the recommendations previously obtained using other interaction measures such as the Relative Gain Array (RGA). The new strategy gives suitable pairing recommendations and is easy to interpret.
|
|
| 9. |
- Samuelsson, Oscar, et al.
(författare)
-
Fault signatures and bias progression in dissolved oxygen sensors
- 2018
-
Ingår i: Water Science and Technology. - : IWA Publishing. - 0273-1223 .- 1996-9732. ; 78:5, s. 1034-1044
-
Tidskriftsartikel (refereegranskat)abstract
- Biofilm fouling is known to impact the data quality of sensors, but little is known about the exact effects. We studied the effects of artificial and real biofilm fouling on dissolved oxygen (DO) sensors in full-scale water resource recovery facilities, and how this can automatically be detected. Biofilm fouling resulted in different drift direction and bias magnitudes for optical (OPT) and electrochemical (MEC) DO sensors. The OPT-sensor was more affected by biofilm fouling compared to the MEC-sensor, especially during summer conditions. A bias of 1 mg/L was detected by analysing the impulse response (IR) of the automatic air cleaning system in the DO sensor. The IR is an effect of a temporal increase in DO concentration during the automatic air cleaning. The IRs received distinct pattern changes that were matched with faults including: biofilm fouling, disturbances in the air supply to the cleaning system, and damaged sensor membrane, which can be used for fault diagnosis. The results highlight the importance of a condition-based sensor maintenance schedule in contrast to fixed cleaning intervals. Further, the results stress the importance of understanding and detecting bias due to biofilm fouling, in order to maintain a robust and resource-efficient process control.
|
|
| 10. |
- Wen, Rui-Tao
(författare)
-
Electrochromism in Metal Oxide Thin Films : Towards long-term durability and materials rejuvenation
- 2015
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Electrochromic thin films can effectively regulate the visible and infrared light passing through a window, demonstrating great potential to save energy and offer a comfortable indoor environment in buildings. However, long-term durability is a big issue and the physics behind this is far from clear. This dissertation work concerns two important parts of an electrochromic window: the anodic and cathodic layers. In particular, work focusing on the anodic side develop a new Ni oxide based layers and uncover degradation dynamics in Ni oxide thin films; and work focusing on the cathodic side addresses materials rejuvenation with the aim to eliminate degradation.In the first part of this dissertation work, iridium oxide is found to be compatible with acids, bases and Li+-containing electrolytes, and an anodic layer with very superior long-term durability was developed by incorporating of small amount (7.6 at. %) of Ir into Ni oxide. This film demonstrated sustained cycle-dependent growth of charge density and electrochromic modulation even after 10,000 CV cycles. The (111) and (100) crystal facets in Ni oxide are found to possess different abilities to absorb cation and/or anion, which yields different degrees of coloration and this is very significant for the electrochromic properties. The degradation of charge capacity in Ni oxide has an inevitable rapid decay in the first hundreds of cycles, subsequently combined with a more gradual decay, which is independent of applied potential and film composition. The consistent phenomenon can be very well modeled by power-law or stretched exponential decay; however the two models are indistinguishable in the current stage. Interestingly, in both models, the power-law exponent is 0.2 ≤ p ≤ 0.8, with most of the values around 0.5, in line with normal or anomalous diffusion models.The second part of dissertation work deals with cathodic WO3 and TiO2. WO3 suffers from ion trapping induced degradation of charge capacity and optical modulation upon electrochemical cycling. This speculation is strongly supported by direct evidence from Time-of-Flight Elastic Recoil Detection Analysis (ToF-ERDA). Most importantly, this ion trapping induced degradation can be eliminated by a galvanostatic de-trapping process. Significant ion-trapping takes place when x exceeds ~0.65 in LixWO3. The trapped ions are stable in the host structure, meaning that the ions cannot de-trap without external stimuli. The similar work done on TiO2 significantly complements and extends the work on the recuperation of WO3; the difference is that the trapped ions in host TiO2 seem to be less stable compared with the trapped ions in WO3. Overall, this dissertation presents a refined conceptual framework for developing superior electrochromic windows in energy efficient buildings.
|
|
