| 1. |
- Zhang, L., et al.
(author)
-
Study on the adhesion strength of new nano-structured polymer-metal composite for thermal interface material (Nano-TIM) under different pressures
- 2011
-
In: Proceedings - 12th International Conference on Electronic Packaging Technology and High Density Packaging, ICEPT-HDP 2011, Shanghai, 8-11 August 2011. - 9781457717680 ; , s. 426-429
-
Conference paper (peer-reviewed)abstract
- With the continual increase in cooling demand for microprocessors, the microelectronics industry has been increasingly focused on the development of thermal solutions. Thermal Interface Material (TIM) plays a key role in reducing the thermal resistance of packaging and the thermal resistance between the electronic device and the external cooling components. Nano-TIM, a new type of thermal interface material, was developed to improve the heat dissipation of electronic devices. This paper describes work undertaken to research the reliability of Nano-TIM. Pull tests were used to investigate the shear strength of samples with Nano-TIM of different thicknesses coalesced between two PCBs with Sn coating made under different pressure. Scanning Electron Microscopy (SEM) analysis techniques were used to determine the morphology of the shear fracture section after pull tests and observe the structure of the cross section of Nano-TIM coalesced between two PCBs with Sn coating.
|
|
| 2. |
- Carlberg, Björn, 1983, et al.
(author)
-
Surface-Confined Synthesis of Silver Nanoparticle Composite Coating on Electrospun Polyimide Nanofibers
- 2011
-
In: Small. - : Wiley. - 1613-6810 .- 1613-6829. ; 7:21, s. 3057-3066
-
Journal article (peer-reviewed)abstract
- A methodology for fabricating hierarchical nanostructures by surface-confined synthesis of silver nanoparticles on electrospun polyimide nanofibers is reported. Through surface-confined imide cleavage at the dianhydride domain via immersion in an aqueous KOH solution, potassium polyamate coatings of accurately defined thickness are formed (at a rate of 25 nm h(-1)). By utilizing the ion-exchange capability of the polyamate resin, silver ions are introduced through immersion in an aqueous AgNO(3) solution. Subsequent reduction of the metal ion species leads to the formation of nanoparticles at the fiber surface. Two modes of reduction, chemical and thermal, are investigated in the report, each leading to distinct morphologies of the nanoparticle coatings. Via thermal reduction, a composite surface layer consisting of monodisperse silver nanoparticles (average diameter 5.2 nm) embedded in a re-imidized polyimide matrix is achieved. In the case of chemical reduction, the reduction process occurs preferentially at the surface of the fiber, leading to the formation of silver nanoparticles anchored at the surface, though not embedded, in a polyamic acid matrix. By regulating the modification depth, control of the particle density on the fiber surface is established. In both reduction approaches, the polyimide nanofiber core exhibits maintained integrity.
|
|
