| 1. |
|
|
| 2. |
- Okda, Sherif, et al.
(författare)
-
Testing of the Aerodynamic Characteristics of an Inflatable Airfoil Section
- 2020
-
Ingår i: Journal of Aerospace Engineering. - 1943-5525 .- 0893-1321. ; 33:5
-
Tidskriftsartikel (refereegranskat)abstract
- Inflatable structures are characterized by being light and easy to manufacture and deploy. Hence, they find many applications in aerospace and aeronautical engineering. In this paper, an inflatable segment with a The National Advisory Committee for Aeronautics (NACA) 0021 airfoil cross-section is designed, fabricated, and tested. The geometrical accuracy of the manufactured inflatable segment is measured using laser scanning. Measurements show that the average normalized error of the chord length and thickness are 2.97% and 0.554%, respectively. The aerodynamic behavior of the inflatable segment is then tested in a wind tunnel at different wind speeds and angles of attack. Lift forces are measured using a six-component balance, while the drag forces are calculated from the wake measurements. The lift and drag coefficients of the inflatable section are compared to those of a standard NACA 0021 airfoil. Finally, flow visualization is examined at different angles of attack using two methods: smoke and tufts. Both methods show that flow separation starts at 15° and full stall occurs at 25°. Results indicate that inflatables can find more applications in the design and construction of aerodynamic structures, such as wings.
|
|
| 3. |
-
INNOTRACK: Concluding technical report
- 2010
-
Samlingsverk (redaktörskap) (refereegranskat)abstract
- The track structure, rails, switches and crossings account for more than 50% of maintenance and renewal costs for the rail industry. To improve the competitiveness of rail transportation, the cost-efficiency of these areas needs to be addressed.This the background to INNOTRACK, an integrated research project funded by the European Commission’s 6th research framework pro- gramme. Running from September 2006 to December 2009, INN- OTRACK has developed a multitude of innovative solutions in the areas of track substructure, rails & welds, and switches & crossings. The solutions have been assessed from technical, logistics and life cycle cost point of views.This Concluding Technical Report of INNOTRACK includes an overview of the project. It further details implementable results, and clusters them into ”highlight” areas. In addition, the book acts as a ”key” to the vast amount of information from INNOTRACK: All sections refer to project reports where more information can be found.
|
|
| 4. |
- Stylidis, Kostas, 1978, et al.
(författare)
-
Perceived quality framework in product generation engineering: an automotive industry example
- 2019
-
Ingår i: Design Science. - : Cambridge University Press (CUP). - 2053-4701 .- 2053-4701. ; 5
-
Tidskriftsartikel (refereegranskat)abstract
- Perceived quality refers to customers’ cognitive and emotional responses to a particular design, often also associated with craftsmanship and customer satisfaction. Previous research defined a taxonomy of perceived quality and provided understanding about how engineering design decisions impact customer satisfaction. Furthermore, development of new products is frequently based on carrying over attributes of existing products, either from the same producer or from competitors. Previous research offered a new product development methodology combining variations of subsystems to carry over from existing products. This brief presents how these two lines of research combined to design the central console of the Porsche Panamera automobile and discusses the opportunities and challenges posed in the practical implementation of this research.
|
|
| 5. |
- Stylidis, Kostas, 1978, et al.
(författare)
-
Perceived quality of products: a framework and attributes ranking method
- 2020
-
Ingår i: Journal of Engineering Design. - : Informa UK Limited. - 1466-1837 .- 0954-4828. ; 31:1, s. 37-67
-
Tidskriftsartikel (refereegranskat)abstract
- Perceived quality is one of the most critical aspects of product development that defines the successful design. This paper presents a new approach to perceived quality assessment by examining its elements, decomposed into a structure with the bottom-up sensory approach from the level of basic (‘ground’) attributes, covering almost every aspect of quality perception from the engineering viewpoint. The paper proposes a novel method for perceived quality attributes relative importance ranking, resulting in the balanced perceived quality of the final product within the given conditions. The proposed method helps to reach the equilibrium of the product’s quality equation from the perspective of design effort, time, and costs estimations. The authors introduce the Perceived Quality Framework (PQF), which is the taxonomy system for perceived quality attributes and the core of the attributes importance ranking (PQAIR) method. The research outcomes are based on findings of the qualitative exploratory study, including European and North American premium and luxury automotive manufacturers. An empirical structural validity test was performed to assess the usability and rigour of the proposed method. The results indicate that perceived quality evaluation can be significantly improved during all stages of product development.
|
|
| 6. |
- Stylidis, Konstantinos, 1978, et al.
(författare)
-
Towards Overcoming the Boundaries between Manufacturing and Perceived Quality: An Example of Automotive Industry
- 2017
-
Ingår i: Procedia CIRP. - : Elsevier BV. - 2212-8271. ; 63, s. 733-738
-
Konferensbidrag (refereegranskat)abstract
- Automotive manufacturing enterprises face many challenges today. Remaining as one of the biggest among them is delivering value to the customers through product quality. Moreover, good manufacturing or technical quality does not always result in high perceived quality from a customer perspective. At the same time, perceived quality is a property that has to be incorporated into the product during the whole product lifecycle, from design to production. Throughout the production stage, every manufacturing operation contributes to the building of final product's perceived quality. Thus, there is a need to control manufacturing operations related to this matter. This paper addresses the connection of the perceived quality framework, which defines dimensions of the perceived quality, to a manufacturing model that represents the manufacturing variation and propagation during different assembly operations. The aim of the study is to overcome boundaries between manufacturing and perceived quality. An industrial example, within the automotive premium sector, has been used to draw this connection illustrating the case of welded assemblies.
|
|
| 7. |
- Brahma, Arindam, 1987, et al.
(författare)
-
A study on the mechanisms of change propagation in mechanical design
- 2021
-
Ingår i: Journal of Mechanical Design - Transactions of the ASME. - : ASME International. - 1050-0472. ; 143:12
-
Tidskriftsartikel (refereegranskat)abstract
- Design changes and change propagation have been recognized as ubiquitous in the engineering design process. But why are some design changes propagated while others are absorbed? This paper reports on a study to investigate the specific properties of a mechanical design that influence whether a change is either propagated or absorbed. Student participants in the study were asked to complete a well-defined mechanical design task and then to introduce several design changes. Analysis of the recorded design processes reveals new insight into the mechanisms of change propagation in terms of properties of the design. The insights suggest avenues for future research to make designs more tolerant to potential future change and to develop improved methods to predict change propagation.
|
|
| 8. |
- Högman, Ulf, 1961, et al.
(författare)
-
Requirements on New Technology and the Technology Implementation Process
- 2010
-
Ingår i: 8th International NordDesign Conference, NordDesign 2010; Goteborg; Sweden; 25 August 2010 through 27 August 2010. ; 2, s. 289-300
-
Konferensbidrag (refereegranskat)abstract
- In literature, many authors have pointed to the importance of technology and technology development for company competitiveness. In this study we aim to study the technology in more detail and attempt to develop an understanding on the requirements and needs on “technology” from the perspective of product development. The research question which we aim to answer in this study is:“What are the requirements on maturity of technology when this technology is about to enter into the product development process?“A qualitative research strategy, based on three study cases involving 17 interviewees, has been chosen. All three cases come from one single company, Volvo Aero Corporation (VAC) in Sweden, in the context of the aero engine industry. The study contributes with a broad mapping of requirements and how they relate to different categories of technologies, showing big differences both regarding content and timing. It is concluded that attention should be payed both to how the organization builds new capabilities and to the capabilities of the technology itself. A surprisingly complicated picture on the requirements relating to the implementation of new technologies has emerged in the study. This contributes to the understanding regarding the difficulties of developing new technology and integrating it into an application.
|
|
| 9. |
- Bayani, Mohsen, 1981
(författare)
-
Squeak and Rattle Prediction for Robust Product Development in the automotive industry
- 2021
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Squeak and rattle are nonstationary, irregular, and impulsive sounds that are audible inside the car cabin. For decades, customer complaints about squeak and rattle have been, and still are, among the top quality issues in the automotive industry. These annoying sounds are perceived as quality defect indications and burden warranty costs to the car manufacturers. Today, the quality improvements regarding the persistent type of sounds in the car, as well as the increasing popularity of electric engines, as green and quiet propulsion solutions, stress the necessity for attenuating annoying sounds like squeak and rattle more than in the past. The economical and robust solutions to this problem are to be sought in the pre-design-freeze phases of the product development and by employing design-concept-related practices. To achieve this goal, prediction and evaluation tools and methods are required to deal with the squeak and rattle quality issues upfront in the product development process. The available tools and methods for the prediction of squeak and rattle sounds in the pre-design-freeze phases of a car development process are not yet sufficiently mature. The complexity of the squeak and rattle events, the existing knowledge gap about the mechanisms behind the squeak and rattle sounds, the lack of accurate simulation and post-processing methods, as well as the computational cost of complex simulations are some of the significant hurdles in this immaturity. This research addresses this problem by identifying a framework for the prediction of squeak and rattle sounds based on a cause-and-effect diagram. The main domains and the elements and the sub-contributors to the problem in each domain within this framework are determined through literature studies, field explorations and descriptive studies conducted on the subject. Further, improvement suggestions for the squeak and rattle evaluation and prediction methods are proposed through prescriptive studies. The applications of some of the proposed methods in the automotive industry are demonstrated and examined in industrial problems. The outcome of this study enhances the understanding of some of the parameters engaged in the squeak and rattle generation. Simulation methods are proposed to actively involve the contributing factors studied in this work for squeak and rattle risk evaluation. To enhance the efficiency and accuracy of the risk evaluation process, methods were investigated and proposed for the system excitation efficiency, modelling accuracy and efficiency and quantification of the response in the time and frequency domains. The demonstrated simulation methods besides the improved understanding of the mechanisms behind the phenomenon can facilitate a more accurate and robust prediction of squeak and rattle risk during the pre-design-freeze stages of the car development.
|
|
| 10. |
- Bayani, Mohsen, 1981, et al.
(författare)
-
Squeak and rattle prevention by geometric variation management using a two-stage evolutionary optimisation approach
- 2020
-
Ingår i: ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE).
-
Konferensbidrag (refereegranskat)abstract
- Squeak and rattle are annoying sounds that often are regarded as the indicators for defects and quality issues by the automotive customers. Among the major causes for the generation of squeak and rattle sounds, geometric variation or tolerance stack-up is a key contributor. In the assembly process, the dimensional variation in critical interfaces for generating squeak and rattle events can be magnified due to tolerance stackup. One provision to manage the tolerance stack-up in these critical interfaces is to optimise the location of connectors between parts in an assembly. Hence, the focus of this work is to prevent squeak and rattle by introducing a geometric variation management approach to be used in the design phase in the automotive industry. The objective is to identify connection configurations that result in minimum variation and deviation in selected measure points from the critical interfaces for squeak and rattle. In this study, a two-stage evolutionary optimisation scheme, based on the genetic algorithm employing the elitism pool, is introduced to fine-tune the connectors’ configuration in an assembly. The objective function was defined as the variation and the deviation in the normal direction and the squeak plane. In the first stage, the location of one-dimensional connectors was found by minimising the objective function in the rattle direction. In the second stage, the best combination of some of the connectors from the first stage was found to define planar fasteners to optimise the objective function both in the rattle direction and the squeak plane. It was shown that by using the proposed two-stage optimisation scheme, the variation and deviation results in critical interfaces for squeak and rattle improved compared to the baseline results.
|
|
