High-resolution computed tomography in resin infused woven carbon fibre composites with voids

Tyck till om SwePub Sök här!

Sisodia, Sanjay M. (författare): Uppsala universitet,Tillämpad mekanik,GKN Aerosp, SE-46181 Trollhattan, Sweden.

Garcea, S. C. (författare): Univ Southampton, Fac Engn & Environm, Mat Res Grp, Southampton, Hants, England.

George, A. R. (författare): Brigham Young Univ, Mfg Engn Technol, Provo, UT 84602 USA.

Fullwood, D. T. (författare): Brigham Young Univ, Mfg Engn Technol, Provo, UT 84602 USA.

Spearing, S. M. (författare): Univ Southampton, Fac Engn & Environm, Mat Res Grp, Southampton, Hants, England.

(creator_code:org_t)

Elsevier BV, 2016
2016
Engelska.
Ingår i: Composites Science And Technology. - : Elsevier BV. - 0266-3538 .- 1879-1050. ; 131, s. 12-21

Relaterad länk:: https://eprints.soto...; visa fler...; https://urn.kb.se/re...; https://doi.org/10.1...; visa färre...

Abstract Ämnesord

Stäng

Tomographic imaging using both microfocus radiation and synchrotron radiation was performed to assess the void defects in resin transfer moulded woven carbon fibre composites. The focus of this study is on characterising the void homology (e.g. local void size and spatial distribution) in relation to weave orientation, infusion direction and potential effects on damage formation in tensile loading. As the orientation angle between the fibre direction of unidirectional layer in the laminate and the direction of the global resin flow increases, from parallel to perpendicular, larger voids and a greater volume fraction of voids were observed, which led to increased damage formation upon loading. Significant accumulation of voids around both the layer interfaces and yarn fibres were also observed. With regard to yarn design, it is recommended to balance the benefits (e.g. fabric handling, structural integrity of preform) and drawbacks (e.g. lower fibre content, more voids) of the supporting yarn. Also, sensible placement of resin inlets and outlets could reduce the amount of deleterious voids, i.e. by promoting resin flow along the fibre direction in the most defect-sensitive off-axis layers.

Av författaren/redakt...: Sisodia, Sanjay ...; Garcea, S. C.; George, A. R.; Fullwood, D. T.; Spearing, S. M.; Gamstedt, Kristo ...

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.