| 1. |
- Munthe, Christian, 1962
(författare)
-
Precaution and Ethics: Handling risks, uncertainties and knowledge gaps in the regulation of new biotechnologies
- 2017
-
Bok (övrigt vetenskapligt/konstnärligt)abstract
- This volume outlines and analyses ethical issues actualized by applying a precautionary approach to the regulation of new biotechnologies. It presents a novel way of categorizing and comparing biotechnologies from a precautionary standpoint. Based on this, it addresses underlying philosophical problems regarding the ethical assessment of decision-making under uncertainty and ignorance, and discusses how risks and possible benefits of such technologies should be balanced from an ethical standpoint. It argues on conceptual and ethical grounds for a technology neutral regulation as well as for a regulation that not only checks new technologies but also requires old, inferior ones to be phased out. It demonstrates how difficult ethical issues regarding the extent and ambition of precautionary policies need to be handled by such a regulation, and presents an overarching framework for doing so.
|
|
| 2. |
- Mayers, Joshua, 1988, et al.
(författare)
-
Integrating Microalgal Production with Industrial Outputs - Reducing Process Inputs and Quantifying the Benefits
- 2016
-
Ingår i: Industrial Biotechnology. - : Mary Ann Liebert Inc. - 1550-9087 .- 1931-8421. ; 12:4, s. 219-234
-
Tidskriftsartikel (refereegranskat)abstract
- The cultivation and processing of microalgal biomass is resource- and energy-intensive, negatively affecting the sustainability and profitability of producing bulk commodities, limiting this platform to the manufacture of relatively small quantities of high-value compounds. A biorefinery approach where all fractions of the biomass are valorized might improve the case for producing lower-value products. However, these systems are still likely to operate very close to thresholds of profitability and energy balance, with wide-ranging environmental and societal impacts. It thus remains critically important to reduce the use of costly and impactful inputs and energy-intensive processes involved in these scenarios. Integration with industrial infrastructure can provide a number of residual streams that can be readily used during microalgal cultivation and downstream processing. This review critically considers some of the main inputs required for microalgal biorefineries - such as nutrients, water, carbon dioxide, and heat - and appraises the benefits and possibilities for industrial integration on a more quantitative basis. Recent literature and demonstration studies will also be considered to best illustrate these benefits to both producers and industrial operators. Additionally, this review will highlight some inconsistencies in the data used in assessments of microalgal production scenarios, allowing more accurate evaluation of potential future biorefineries.
|
|
| 3. |
- Andersson, Viktor, 1983
(författare)
-
Excess heat utilisation in oil refineries - CCS and algae-based biofuels
- 2016
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The main objective of this thesis is to investigate two different concepts for CO2 mitigation, from a system perspective, in relation to the oil refining industry: CO2 capture and storage; and algae-based biofuels. For all these processes, process integration with an oil refinery is assumed. The oil refinery sector is a major emitter of CO2 and is responsible for 9% of the industrial emissions of CO2 worldwide. Oil refineries have large amounts of unused excess heat, which can be used to satisfy the heat demands of a CO2 capture plant, a land-based algal cultivation facility, or an algae-based biofuel process. The use of this excess heat significantly reduces the cost for CO2 capture, while an economic evaluation for algae-based biofuels has not been made.Since the amount of heat available from the oil refinery´s processes increase with decreasing temperature in the stripper reboiler, it was investigated how much heat was available at different temperatures. It was also investigated how the decreased temperature would affect the heat demand of CO2 capture processes that use MEA or ammonia as the absorbent. The findings show that it is possible to capture more CO2 using excess heat when the temperature in the stripper reboiler is decreased. For the MEA process, the lower limit of the temperature interval investigated showed the maximum CO2 capture rate, while the ammonia process benefitted from a lower temperature than the standard temperature but showed maximal CO2 capture rate above the lower limit. These results are valid only when using excess heat to satisfy the entire heat demand. At the case study refinery, the available excess heat could satisfy between 28% and 50% of the heat demand of the MEA process when treating the flue gases from all chimneys, depending on the temperature in the stripper reboiler. This utilisation of excess heat represents a way to reduce significantly the costs for CCS in an oil refinery. Land-based cultivation of algae proved to be unsuitable for the utilisation of excess heat. Since the cultivation pond is exposed to wind, rain, and cold, the heat demand fluctuates strongly over the year, making the pond an unstable recipient of the excess heat.Three types of biofuel processes based on microalgae and macroalgae were investigated with respect to integration with the oil refinery. For the algae-based biofuel processes, heat integration and material integration combined to increase the efficiency of the system. When two different build margin technologies (with different CO2 emission factors) are employed for electricity production, macroalgae-based biofuel production appears to be the more robust process from the perspective of CO2 due to the lower electricity demands of the algal cultivation and harvesting phases.
|
|
| 4. |
- Anasontzis, George E, 1980
(författare)
-
Biomass modifying enzymes: From discovery to application
- 2012
-
Ingår i: Oral presentation at the Chalmers Life Science AoA conference.
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- It has now been realized that the road towards the bio-based economy is a one-way street, leaving gradually the oil-based technology and driving slowly towards a more sustainable society. The current non-biodegradable hydrocarbon fuels and plastics will be replaced by new products which will derive from natural and renewable resources. The synthesis of such biofuels and biochemicals is still challenged by the difficulties to cost efficiently degrade lignocellulosic material to fermentable sugars or to isolate the intact polymers. Biomass degrading and modifying enzymes play an integral role both in the separation of the polymers from the wood network, as well as in their subsequent modification, prior to further product development.Our group interests focus on all levels of applied enzyme research of biomass acting enzymes: Discovery, assay development, production and application. Relevant examples will be provided: What is our strategy for discovering novel microorganisms and enzymes from the tropical forests and grasslands of Vietnam? How do we design novel real-world assays for enzyme activity determination? Which are the bottlenecks in the enzymatic cellulose hydrolysis? How enzymes can be used to produce high added value compounds from biomass?
|
|
| 5. |
-
Systems Perspectives on Biorefineries 2012
- 2012
-
Samlingsverk (redaktörskap) (refereegranskat)abstract
- Replacing fossil fuels with biomass for the production of energy carriers, materials and specialty chemicalsis a challenge that now confronts humanity. In which applications shall we use limited resourcesof biomass? How can biomass be refined into the products we want? What is an optimal design of abiorefinery? How is the most advantageous portfolio of policy instruments designed to realise the biorefineriesof the future?There is not one final answer to these questions. However, different systems studies can provide us withcomplementary pieces of the puzzle. These can be valuable by themselves, or be brought together into alarger and more complex picture. Systems perspectives on Biorefineries 2012 contains nine chapters thataddress different topics related to the immensely important issue of how the world’s biomass resourcescan, or should, be converted into the goods we need and desire. The book is far from complete, but it is acontribution and a start...
|
|
| 6. |
- Steinhagen, Sophie, et al.
(författare)
-
Harvest time can affect the optimal yield and quality of sea lettuce (Ulva fenestrata) in a sustainable sea-based cultivation : Seasonal Cultivation of Ulva fenestrata
- 2022
-
Ingår i: Frontiers in Marine Science. - : Frontiers Media SA. - 2296-7745. ; 9
-
Tidskriftsartikel (refereegranskat)abstract
- Seaweed biomass is a renewable resource with multiple applications. Sea-based cultivation of seaweeds can provide high biomass yields, low construction, operation, and maintenance costs and could offer an environmentally and economically sustainable alternative to land-based cultivations. The biochemical profile of sea-grown biomass depends on seasonal variation in environmental factors, and the optimization of harvest time is important for the quality of the produced biomass. To identify optimal harvest times of Swedish sea-based cultivated sea lettuce (Ulva fenestrata), this study monitored biomass yield, morphology, chemical composition, fertility, and biofouling at five different harvesting times in April - June 2020. The highest biomass yields (approx. 1.2 kg fw [m rope]-1) were observed in late spring (May). The number and size of holes in the thalli and the amount of fertile and fouled tissue increased with prolonged growth season, which together led to a significant decline in both biomass yield and quality during summer (June). Early spring (April) conditions were optimal for obtaining high fatty acid, protein, biochar, phenolic, and pigment contents in the biomass, whereas carbohydrate and ash content, as well as essential and non-essential elements, increased later in the growth season. Our study results show that the optimal harvest time of sea-based cultivated U. fenestrata depends on the downstream application of the biomass and must be carefully selected to balance yield, quality, and desired biochemical contents to maximize the output of future sea-based algal cultivations in the European Northern Hemisphere.
|
|
| 7. |
- Ask, Magnus, 1983
(författare)
-
Towards More Robust Saccharomyces cerevisiae Strains for Lignocellulosic Bioethanol Production: Lessons from process concepts and physiological investigations
- 2013
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Dwindling oil reserves and the negative impacts of fossil fuels on the environment call for more sustainable energy sources. First-generation bioethanol produced from sugar cane and corn has met some of these needs, but it competes with the food supply for raw materials. Lignocellulosic biomass is an abundant non-edible raw material that can be converted to ethanol using the yeast Saccharomyces cerevisiae. However, due to the inherent recalcitrance to degradation of lignocellulosic raw materials, harsh pretreatment methods must be used to liberate fermentable sugars, resulting in the release of compounds such as acetic acid, furan aldehydes and phenolics, that inhibit yeast metabolism. This thesis research aimed to identify bottlenecks in terms of inhibitory compounds related to ethanol production from two lignocellulosic raw materials, Arundo donax and spruce, and furthermore to harness the physiological responses to these inhibitors to engineer more robust yeast strains. A comparative study of separate hydrolysis and fermentation (SHF) and simultaneous saccharification and fermentation (SSF) revealed that acetic acid limits xylose utilization in pretreated Arundo donax, whereas the furan aldehydes furfural and 5-hydroxymethyl-2-furaldehyde (HMF) were hypothesized to be key inhibitors in pretreated spruce. The impacts of furfural and HMF on the redox and energy metabolism of S. cerevisiae were studied in detail in chemostat and batch cultivations. After adding the inhibitors to the feed medium of chemostat cultivations, the intracellular levels of NADH, NADPH, and ATP were found to decrease by 40, 75, and 19%, respectively, suggesting that furan aldehydes drain the cells of reducing power. A strong effect on redox metabolism was also observed after pulsing furfural and HMF in the xylose consumption phase in batch cultures. The drainage of reducing power was also observed in a genome-wide study of transcription that found that genes related to NADPH-requiring processes, such as nitrogen and sulphur assimilation, were significantly induced. The redox metabolism was engineered by overproducing the protective metabolite and antioxidant glutathione. Strains with an increased intracellular level of reduced glutathione were found to sustain ethanol production for longer duration in SSF of pretreated spruce, yielding 70% more ethanol than did the wild type strain.
|
|
| 8. |
- Ylitervo, Päivi
(författare)
-
Concepts for improving ethanol productivity from lignocellulosic materials : encapsulated yeast and membrane bioreactors
- 2014
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Lignocellulosic biomass is a potential feedstock for production of sugars, which can be fermented into ethanol. The work presented in this thesis proposes some solutions to overcome problems with suboptimal process performance due to elevated cultivation temperatures and inhibitors present during ethanol production from lignocellulosic materials. In particular, continuous processes operated at high dilution rates with high sugar utilisation are attractive for ethanol fermentation, as this can result in higher ethanol productivity. Both encapsulation and membrane bioreactors were studied and developed to achieve rapid fermentation at high yeast cell density. My studies showed that encapsulated yeast is more thermotolerant than suspended yeast. The encapsulated yeast could successfully ferment all glucose during five consecutive batches, 12 h each at 42 °C. In contrast, freely suspended yeast was inactivated already in the second or third batch. One problem with encapsulation is, however, the mechanical robustness of the capsule membrane. If the capsules are exposed to e.g. high shear forces, the capsule membrane may break. Therefore, a method was developed to produce more robust capsules by treating alginate-chitosan-alginate (ACA) capsules with 3-aminopropyltriethoxysilane (APTES) to get polysiloxane-ACA capsules. Of the ACA-capsules treated with 1.5% APTES, only 0–2% of the capsules broke, while 25% of the untreated capsules ruptured within 6 h in a shear test. In this thesis membrane bioreactors (MBR), using either a cross-flow or a submerged membrane, could successfully be applied to retain the yeast inside the reactor. The cross-flow membrane was operated at a dilution rate of 0.5 h-1 whereas the submerged membrane was tested at several dilution rates, from 0.2 up to 0.8 h-1. Cultivations at high cell densities demonstrated an efficient in situ detoxification of very high furfural levels of up to 17 g L-1 in the feed medium when using a MBR. The maximum yeast density achieved in the MBR was more than 200 g L-1. Additionally, ethanol fermentation of nondetoxified spruce hydrolysate was possible at a high feeding rate of 0.8 h-1 by applying a submerged membrane bioreactor, resulting in ethanol productivities of up to 8 g L-1 h-1. In conclusion, this study suggests methods for rapid continuous ethanol production even at stressful elevated cultivation temperatures or inhibitory conditions by using encapsulation or membrane bioreactors and high cell density cultivations.
|
|
| 9. |
- Amiandamhen, Stephen, 1983-, et al.
(författare)
-
Bioenergy production and utilization in different sectors in Sweden: A state of the art review
- 2020
-
Ingår i: BioResources. - : University of North Carolina Press. - 1930-2126 .- 1930-2126. ; 15:4, s. 9834-9857
-
Forskningsöversikt (refereegranskat)abstract
- In the continual desire to reduce the environmental footprints of human activities, research efforts to provide cleaner energy is increasingly becoming vital. The effect of climate change on present and future existence, sustainable processes, and utilizations of renewable resources have been active topics within international discourse. In order to reduce the greenhouse gases emissions from traditional materials and processes, there has been a shift to more environmental friendly alternatives. The conversion of biomass to bioenergy, including biofuels has been considered to contribute to the future of climate change mitigation, although there are concerns about carbon balance from forest utilization. Bioenergy accounts for more than one-third of all energy used in Sweden and biomass has provided about 60% of the fuel for district heating. Apart from heat and electricity supply, the transport sector, with about 30% of global energy use, has a significant role in a sustainable bioenergy system. This review presents the state of the art in the Swedish bioenergy sector based on literature and Swedish Energy Agency’s current statistics. The review also discusses the overall bioenergy production and utilization in different sectors in Sweden. The current potential, challenges, and environmental considerations of bioenergy production are also discussed.
|
|
| 10. |
- Wang, Shule, 1994-, et al.
(författare)
-
Effect of H2 as Pyrolytic Agent on the Product Distribution during Catalytic Fast Pyrolysis of Biomass Using Zeolites
- 2018
-
Ingår i: Energy & Fuels. - : American Chemical Society (ACS). - 0887-0624 .- 1520-5029. ; 32:8, s. 8530-8536
-
Tidskriftsartikel (refereegranskat)abstract
- Bio-oil generated from catalytic fast pyrolysis or hydrotreating processes represents one of the most promising alternatives to liquid fossil fuels. The use of H2 as carrier gas in the pyrolysis of biomass requires further research to study the catalytic fast pyrolysis reactions in the case of using reactive atmosphere. In this work, pyrolysis experiments with lignocellulosic biomass have been performed in a fixed bed reactor in H2 and N2 atmospheres with/without HZSM-5 additions to investigate the influence of the pyrolytic agents during fast pyrolysis of biomass and upgrading of pyrolytic vapors over a zeolitic catalyst. It was found that in a H2 atmosphere, H2 was consumed in both noncatalytic and catalytic pyrolysis processes, respectively. Higher yields of nonaqueous liquids and permanent gases are obtained in a H2 atmosphere compared to a N2 atmosphere. A catalytic pyrolysis process using HZSM-5 in a H2 atmosphere increased the production of polymer aromatic hydrocarbons and suppressed the production of monomer aromatic hydrocarbons compared to similar tests performed in a N2 atmosphere. The results show an overall increased activity of HZSM-5 in the reactive H2 atmosphere compared to a N2 atmosphere.
|
|
