SwePub
Tyck till om SwePub Sök här!
Sök i SwePub databas

  Utökad sökning

AND är defaultoperator och kan utelämnas

Träfflista för sökning "AMNE:(ENGINEERING AND TECHNOLOGY) AMNE:(Industrial Biotechnology) AMNE:(Medical Biotechnology) "

Sökning: AMNE:(ENGINEERING AND TECHNOLOGY) AMNE:(Industrial Biotechnology) AMNE:(Medical Biotechnology)

  • Resultat 1-10 av 557
Sortera/gruppera träfflistan
   
NumreringReferensOmslagsbildHitta
1.
  • Sepehri, Sobhan, 1986, et al. (författare)
  • Volume-amplified magnetic bioassay integrated with microfluidic sample handling and high-Tc SQUID magnetic readout
  • 2018
  • Ingår i: APL Bioengineering. - : AIP Publishing. - 2473-2877. ; 2:1
  • Tidskriftsartikel (refereegranskat)abstract
    • A bioassay based on a high-Tc superconducting quantum interference device (SQUID) reading out functionalized magnetic nanoparticles (fMNPs) in a prototype microfluidic platform is presented. The target molecule recognition is based on volume amplification using padlock-probe-ligation followed by rolling circle amplification (RCA). The MNPs are functionalized with single-stranded oligonucleotides, which give a specific binding of the MNPs to the large RCA coil product, resulting in a large change in the amplitude of the imaginary part of the ac magnetic susceptibility. The RCA products from amplification of synthetic Vibrio cholera target DNA were investigated using our SQUID ac susceptibility system in microfluidic channel with an equivalent sample volume of 3 μl. From extrapolation of the linear dependence of the SQUID signal versus concentration of the RCA coils, it is found that the projected limit of detection for our system is about 1.0 e5 RCA coils (0.2e−18 mol), which is equivalent to 66 fM in the 3 μl sample volume. This ultra-high magnetic sensitivity and integration with microfluidic sample handling are critical steps towards magnetic bioassays for rapid detection of DNA and RNA targets at the point of care.
  •  
2.
  • Munthe, Christian, 1962 (författare)
  • The Price of Precaution and the Ethics of Risk
  • 2011
  • Bok (övrigt vetenskapligt/konstnärligt)abstract
    • Since a couple of decades, the notion of a precautionary principle plays a central and increasingly influential role in international as well as national policy and regulation regarding the environment and the use of technology. Urging society to take action in the face of potential risks of human activities in these areas, the recent focus on climate change has further sharpened the importance of this idea. However, the idea of a precautionary principle has also been problematised and criticised by scientists, scholars and policy activists, and been accused of almost every intellectual sin imaginable: unclarity, impracticality, arbitrariness and moral as well as political unsoundness. In that light, the very idea of precaution as an ideal for policy making rather comes out as a dead end. On the basis of these contrasting starting points, Christian Munthe undertakes an innovative, in-depth philosophical analysis of what the idea of a precautionary principle is and should be about. A novel theory of the ethics of imposing risks is developed and used as a foundation for defending the idea of precaution in environmental and technological policy making against its critics, while at the same time avoiding a number of identified flaws. The theory is shown to have far-reaching consequences for areas such as bio-, information- and nuclear technology, and global environmental policy in areas such as climate change. The author argues that, while the price we pay for precaution must not be too high, we have to be prepared to pay it in order to act ethically defensible. A number of practical suggestions for precautionary regulation and policy making are made on the basis of this, and some challenges to basic ethical theory as well as consumerist societies, the global political order and liberal democracy are identified
  •  
3.
  • Rems, Lea, et al. (författare)
  • Cell electrofusion using nanosecond electric pulses
  • 2013
  • Ingår i: Scientific Reports. - : Macmillan Publishers Ltd.. - 2045-2322. ; 3
  • Tidskriftsartikel (refereegranskat)abstract
    • Electrofusion is an efficient method for fusing cells using short-duration high-voltage electric pulses. However, electrofusion yields are very low when fusion partner cells differ considerably in their size, since the extent of electroporation (consequently membrane fusogenic state) with conventionally used microsecond pulses depends proportionally on the cell radius. We here propose a new and innovative approach to fuse cells with shorter, nanosecond (ns) pulses. Using numerical calculations we demonstrate that ns pulses can induce selective electroporation of the contact areas between cells (i.e. the target areas), regardless of the cell size. We then confirm experimentally on B16-F1 and CHO cell lines that electrofusion of cells with either equal or different size by using ns pulses is indeed feasible. Based on our results we expect that ns pulses can improve fusion yields in electrofusion of cells with different size, such as myeloma cells and B lymphocytes in hybridoma technology.
  •  
4.
  •  
5.
  •  
6.
  • Apelgren, Peter, et al. (författare)
  • Chondrocytes and stem cells in 3D-bioprinted structures create human cartilage in vivo.
  • 2017
  • Ingår i: PloS one. - : Public Library of Science (PLoS). - 1932-6203. ; 12:12
  • Tidskriftsartikel (refereegranskat)abstract
    • Cartilage repair and replacement is a major challenge in plastic reconstructive surgery. The development of a process capable of creating a patient-specific cartilage framework would be a major breakthrough. Here, we described methods for creating human cartilage in vivo and quantitatively assessing the proliferative capacity and cartilage-formation ability in mono- and co-cultures of human chondrocytes and human mesenchymal stem cells in a three-dimensional (3D)-bioprinted hydrogel scaffold. The 3D-bioprinted constructs (5 × 5 × 1.2 mm) were produced using nanofibrillated cellulose and alginate in combination with human chondrocytes and human mesenchymal stem cells using a 3D-extrusion bioprinter. Immediately following bioprinting, the constructs were implanted subcutaneously on the back of 48 nude mice and explanted after 30 and 60 days, respectively, for morphological and immunohistochemical examination. During explantation, the constructs were easy to handle, and the majority had retained their macroscopic grid appearance. Constructs consisting of human nasal chondrocytes showed good proliferation ability, with 17.2% of the surface areas covered with proliferating chondrocytes after 60 days. In constructs comprising a mixture of chondrocytes and stem cells, an additional proliferative effect was observed involving chondrocyte production of glycosaminoglycans and type 2 collagen. This clinically highly relevant study revealed 3D bioprinting as a promising technology for the creation of human cartilage.
  •  
7.
  • Martinez Avila, Hector, 1985 (författare)
  • Biofabrication, Biomechanics and Biocompatibility of Nanocellulose-based Scaffolds for Auricular Cartilage Regeneration
  • 2015
  • Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
    • In about 2:10,000 births the external part of the ear, the auricle, is severely malformed or absent. Furthermore, tumors and trauma can cause defects to the auricle. For patients with dysplasia of the auricle, and especially for children, an inconspicuous outer appearance with life-like auricles is important for their psychological and emotional well being as well as their psycho-social development. Auricular reconstruction remains a great challenge due to the complexity of surgical reconstruction using rib cartilage. Despite the advances in stem cell technology and biomaterials, auricular cartilage tissue engineering (TE) is still in an early stage of development due to critical requirements demanding appropriate mechanical properties and shape stability of the tissue-engineered construct. This thesis has focused on developing patient-specific tissue-engineered auricles for one-step surgery using a novel biomaterial, bacterial nanocellulose (BNC), seeded with human nasoseptal chondrocytes (hNC) and bone marrow mononuclear cells (MNC).Biomechanical properties of human auricle cartilage were measured and used as a benchmark for tuning BNC properties. In order to meet the biomechanical requirements, a scaffold with bilayer architecture composed of a dense BNC support layer and a macroporous structure was designed. Firstly, the biocompatibility of the dense BNC layer was investigated, demonstrating a minimal foreign body response according to standards set forth in ISO 10993. Secondly, different methods to create macroporous BNC scaffolds were studied and the redifferentiation capacity of hNCs was evaluated in vitro; revealing that macroporous BNC scaffolds support cell ingrowth, proliferation and neocartilage formation. The bilayer BNC scaffold was biofabricated and tested for endotoxins and cytotoxicity before evaluating in long-term 3D culture, and subsequently in vivo for eight weeks—in an immunocompromised animal model. The results demonstrated that the non-pyrogenic and non- cytotoxic bilayer BNC scaffold offers a good mechanical stability and maintains a structural integrity, while providing a porous 3D environment that is suitable for hNCs and MNCs to produce neocartilage, in vitro and in vivo. Furthermore, patient-specific auricular BNC scaffolds with bilayer architecture were biofabricated and seeded with autologous rabbit auricular chondrocytes (rAC) for implantation in an immunocompetent rabbit model for six weeks. The results demonstrated the shape stability of the rAC-seeded scaffolds and neocartilage depositions in the immunocompetent autologous grafts. 3D bioprinting was also evaluated for biofabrication of patient-specific, chondrocyte-laden auricular constructs using a bioink composed of nanofibrillated cellulose and alginate. Bioprinted auricular constructs showed an excellent shape and size stability after in vitro culture. Moreover, this bioink supports redifferentiation of hNCs while offering excellent printability, making this a promising approach for auricular cartilage TE. Furthermore, the use of bioreactors is essential for the development of tissue-engineered cartilage in vitro. Thus, a compression bioreactor was utilized to apply dynamic mechanical stimulation to cell-seeded constructs as a means to enhance production of extracellular matrix in vitro.In this work, a potential clinical therapy for auricular reconstruction using tissue-engineered auricles is demonstrated; where BNC is proposed as a promising non-degradable biomaterial with good chemical and mechanical stability for auricular cartilage TE. Although the primary focus of this thesis is on auricular reconstruction, the methods developed are also applicable in the regeneration of other cartilage tissues such as those found in the nose, trachea, spine and articular joints.
  •  
8.
  •  
9.
  • Cutas, Daniela, 1978, et al. (författare)
  • Legal imperialism in the regulation of stem cell research and therapy: the problem of extraterritorial jurisdiction
  • 2010
  • Ingår i: Capps BJ & Campbell AV (eds.). CONTESTED CELLS: Global Perspectives on the Stem Cell Debate. - London : Imperial College Press. - 9781848164376 ; , s. 95-119
  • Bokkapitel (övrigt vetenskapligt/konstnärligt)abstract
    • Countries worldwide have very different national regulations on human embryonic stem (ES) cell research, informed by a range of ethical values. Some countries find reason to extend the applicability of their regulations on such research to its citizens when they visit other countries. Extraterritorial jurisdiction has recently been identified as a potential challenge towards global regulation of ES cell research. This chapter explores the implications and impact of extraterritorial jurisdiction and global regulation of ES cell research on researchers, clinicians and national health systems, and how this may affect patients. The authors argue that it would make ethical sense for ES cell restrictive countries to extend its regulations on ES cell research beyond its borders, because, if these countries really consider embryo destruction to be objectionable on the basis on the status of the embryo, then they ought to count it morally on par with murder (and thus have a moral imperative to protect embryos from the actions of its own citizens). However, doing so could lead to a legal situation that would result in substantial harm to central values in areas besides research, such as health care, the job market, basic freedom of movement, and strategic international finance and politics. Thus, it seems that restrictive extraterritorial jurisdiction in respect to ES cell research would be deeply problematic, given that the ethical permissibility of ES cell research is characterised by deep and wide disagreement.
  •  
10.
  • Iseri, Emre (författare)
  • Microfluidic Compartmentalization for Smart Materials, Medical Diagnostics and Cell Therapy
  • 2022
  • Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
    • The organisation of fluids in small compartments is ubiquitous in nature, such as in the cellular composition of all life. This work explores several engineering avenues where microscale fluid compartmentalization can bring novel material properties or novel functionality in life sciences or medicine. Here, we introduce four unique compartmentalization methods: 1) 3D fluid self-organisation in microscaffolds (FLUID3EAMS), 2) 2D microcapillary arrays on a dipstick (Digital Dipstick), 3) a sliding microfluidic platform with cross-flow (Slip-X-Chip), and 4) compartmentalization by cutting of soft solid matter (Solidify & Cut). These methods were used in a wide range of applications. Within the area of smart materials, we applied FLUID3EAMS to synthesize materials with temperature-tuneable permeability and surface energy and to establish, in a well-controlled fashion, tissue-like materials in the form of 3D droplet interface bilayer networks. Solidify & Cut was used to form soft composites with a new type of magnetic behaviour, rotation-induced ferromagnetism, that allows easy reprogramming of the magnetization of magnetopolymers. Within the area of medical diagnostics, we applied Digital Dipstick to perform rapid digital bacterial culture in a dipstick format and obtained clinically relevant diagnostic results on samples from patients with a urinary tract infection. Furthermore, Slip-X-Chip enables particle concentration and washing as new functions in sliding microfluidic platforms, which significantly expands their potential application area. Finally, within the area of cell therapy, we explored the microencapsulation of high concentrations of therapeutic cells and presented a novel technique to fabricate core-shell microcapsules by exploiting the superior material properties of spider silk membranes. 
  •  
Skapa referenser, mejla, bekava och länka
  • Resultat 1-10 av 557
Typ av publikation
tidskriftsartikel (405)
konferensbidrag (52)
doktorsavhandling (29)
forskningsöversikt (23)
annan publikation (18)
bokkapitel (16)
visa fler...
licentiatavhandling (7)
bok (4)
konstnärligt arbete (2)
rapport (2)
recension (1)
visa färre...
Typ av innehåll
refereegranskat (454)
övrigt vetenskapligt/konstnärligt (103)
Författare/redaktör
Bjursten, Lars Magnu ... (23)
Nielsen, Jens B, 196 ... (17)
Munthe, Christian, 1 ... (16)
Gatenholm, Paul, 195 ... (14)
Uhlén, Mathias (14)
Falsen, Enevold, 193 ... (13)
visa fler...
Holst, Olle (12)
Tolmachev, Vladimir (11)
Olsson, Lisbeth, 196 ... (10)
Ask, Per (10)
Tenje, Maria (9)
Ohlin, Mats (9)
Nilsson, Peter (8)
Taherzadeh Esfahani, ... (8)
Pontén, Fredrik (7)
Nordberg Karlsson, E ... (7)
Lundeberg, Joakim (7)
Rova, Ulrika (7)
Palmquist, Anders, 1 ... (7)
Andersson, Martin, 1 ... (7)
Tengvall, Pentti (6)
Börjesson, Per Ola (6)
Enoksson, Peter, 195 ... (6)
Kölby, Lars, 1963 (6)
Holmer, Nils-Gunnar (6)
Taherzadeh, Mohammad ... (5)
Altai, Mohamed (5)
Orlova, Anna (5)
Jirström, Karin (5)
Sjöblom, Magnus (5)
Brumer, Harry (5)
Strid Orrhult, Linne ... (4)
Undeland, Ingrid, 19 ... (4)
Oroujeni, Maryam, Ph ... (4)
Orlova, Anna, 1960- (4)
Eriksson Karlström, ... (4)
Mitran, Bogdan (4)
Millati, Ria, 1972 (4)
Omar, Omar (4)
Lundberg, Emma (4)
Laurell, Thomas (4)
Bülow, Leif (4)
Thomsen, Peter, 1953 (4)
Enejder, Annika, 196 ... (4)
Ståhl, Stefan (4)
Holgersson, Jan (4)
Sennerby, Lars, 1960 (4)
Atefyekta, Saba, 198 ... (4)
Eliasson, Pernilla T ... (4)
Löfblom, John (4)
visa färre...
Lärosäte
Chalmers tekniska högskola (164)
Göteborgs universitet (151)
Kungliga Tekniska Högskolan (116)
Lunds universitet (114)
Uppsala universitet (68)
Linköpings universitet (35)
visa fler...
Karolinska Institutet (30)
Sveriges Lantbruksuniversitet (29)
Luleå tekniska universitet (23)
Umeå universitet (18)
Stockholms universitet (17)
Högskolan i Borås (16)
RISE (14)
Örebro universitet (10)
Linnéuniversitetet (10)
Malmö universitet (7)
Mittuniversitetet (5)
Högskolan i Skövde (4)
Högskolan Kristianstad (3)
Högskolan i Halmstad (3)
Karlstads universitet (3)
Mälardalens universitet (2)
Jönköping University (1)
Södertörns högskola (1)
Blekinge Tekniska Högskola (1)
visa färre...
Språk
Engelska (549)
Svenska (5)
Tyska (1)
Odefinierat språk (1)
Rumänska (1)
Forskningsämne (UKÄ/SCB)
Teknik (555)
Medicin och hälsovetenskap (365)
Naturvetenskap (166)
Lantbruksvetenskap (19)
Samhällsvetenskap (19)
Humaniora (18)

År

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

 
pil uppåt Stäng

Kopiera och spara länken för att återkomma till aktuell vy