| 1. |
- Almqvist, Nils, et al.
(författare)
-
Imaging human erythrocyte spectrin with atomic force microscopy
- 1994
-
Ingår i: Micron. - : Elsevier BV. - 0968-4328 .- 1878-4291. ; 25:3, s. 227-232
-
Tidskriftsartikel (refereegranskat)abstract
- Isolated spectrin covalently attached to a surface in a liquid environment as well as dried on mica has been studied with a contact-mode atomic force microscope. Both pyramidal and conical-type cantilever tip facets were used in the AFM. Our images show structures and give dimensions that correlate well with previous structural studies using transmission electron microscopy.
|
|
| 2. |
- Adegoke, Olutayo, et al.
(författare)
-
Scanning electron microscopy and atom probe tomography characterization of laser powder bed fusion precipitation strengthening nickel-based superalloy
- 2023
-
Ingår i: Micron. - 0968-4328 .- 1878-4291. ; 171
-
Tidskriftsartikel (refereegranskat)abstract
- Atom probe tomography (APT) was utilized to supplement scanning electron microscopy (SEM) characterizationof a precipitation strengthening nickel-based superalloy, Alloy 247LC, processed by laser powder bed fusion (LPBF). It was observed that the material in the as-built condition had a relatively high strength. Using both SEMand APT, it was concluded that the high strength was not attributed to the typical precipitation strengtheningeffect of γ’. In the absence of γ’ it could be reasonably inferred that the numerous black dots observed in thecells/grains with SEM were dislocations and as such should be contributing significantly to the strengthening.Thus, the current investigation demonstrated that relatively high strengthening can be attained in L-PBF even inthe absence of precipitated γ’. Even though γ’ was not precipitated, the APT analysis displayed a nanometer scalepartitioning of Cr that could be contributing to the strengthening. After heat-treatment, γ’ was precipitated and itdemonstrated the expected high strengthening behavior. Al, Ta and Ti partitioned to γ’. The strong partitioningof Ta in γ’ is indicative that the element, together with Al and Ti, was contributing to the strain-age crackingoccurring during heat-treatment. Cr, Mo and Co partitioned to the matrix γ phase. Hf, Ta, Ti and W were found inthe carbides corroborating previous reports that they are MC.
|
|
| 3. |
- Blomgren, Bo, et al.
(författare)
-
A computerised, unbiased method for epithelial measurement
- 2004
-
Ingår i: Micron. - Amsterdam : Elsevier. - 0968-4328 .- 1878-4291. ; 35, s. 319-329
-
Tidskriftsartikel (refereegranskat)abstract
- ObjectiveTo develop and evaluate a standardised method for unbiased measurements of epithelial thickness taking the variability of the dermal papillae in consideration.MethodsA computer-assisted measurement program suitable for haematoxylin and eosin routine stained specimens has been developed.ResultsThe developed program was designed to measure four different distance parameters, taking the number, height and width of dermal papillae into account. The measurement program gave very accurate results compared with manual measurements. The measurement results can be presented as tables or star graphs, and the results can be further processed by multivariate analysis.ConclusionThe computer-assisted measurement program is considered to be a valuable and reliable tool for measurements of epithelial thickness, irrespectively of the variability of the epithelial morphology. Since length, size and number of the papillae may change with certain pathological conditions, age and also under hormonal influence, this method can be a helpful diagnostic tool.
|
|
| 4. |
- Blomgren, Bo, et al.
(författare)
-
A novel method for quantification of the folding of elastic laminae in elastic arteries
- 2008
-
Ingår i: Micron. - : Elsevier BV. - 0968-4328 .- 1878-4291. ; 39:5, s. 623-630
-
Forskningsöversikt (refereegranskat)abstract
- A transgenic mouse overexpressing the human form of semicarbazide-sensitive amine oxidase (SSAO) is known to have an abnormal structure of the elastic laminae and the elastic fibres in the aorta. Compared to the non-transgenic littermates, the elastic laminae are less folded. In order to quantify the undulation of this structure, an image analysis program that identified the elastic laminae was developed. The program measures the area fraction in different sectors from a plane parallel to the aorta wall. Images were taken from unstained aorta specimens where the elastic laminae were visualised with phase contrast microscopy. A contextual operation of the images produced a local orientation estimation for every linear structure. The image was then thresholded in eight sectors from 0 degrees to 180 degrees, with different orientation angles. The results show that the area fraction of the elastic laminae was significantly lower for the transgenic mouse in all sectors measured except for two. At 0-25 degrees, no difference was seen. In the sector at 160-180 degrees, parallel to the aorta wall, the area fraction of elastic laminae was instead significantly higher in the transgenic mouse. A novel method is presented, developed for detection and quantification of pathological changes in the elastic laminae in the aorta wall. The method gave reliable results and is considered to be a useful tool for morphometric studies of aorta with this kind of altered morphology concerning the elastic laminae. When compared with tangent count, the control group had a significantly larger mean curvature.
|
|
| 5. |
- Canovic, Sead, et al.
(författare)
-
CVD TiC/alumina multilayer coatings grown on sapphire single crystals
- 2011
-
Ingår i: Micron. - : Elsevier BV. - 0968-4328 .- 1878-4291. ; 42:8, s. 808-818
-
Tidskriftsartikel (refereegranskat)abstract
- Multilayers of TiC/α-Al(2)O(3) consisting of three (1μm thick) alumina layers separated by thin (∼10nm) oxidized TiC layers have been deposited onto c-, a- and r-surfaces of single crystals of α-Al(2)O(3) by chemical vapour deposition (CVD). The aim of this paper is to describe and compare the detailed microstructure of the different multilayer coatings by using transmission electron microscopy (TEM). The general microstructure of the alumina layers is very different when deposited onto different surfaces of α-Al(2)O(3) single crystal substrates. On the c- and a-surfaces the alumina layers grow evenly resulting in growth of single crystal layers of TiC and alumina throughout the coating. However, when deposited on the r-surface the alumina layers generally grow unevenly. No pores are observed within the alumina layers, while a small number of pores are found at the interfaces below the TiC layers. The TiC and alumina layers grow epitaxially on the c- and a-surface substrates. On the r-surface, epitaxy is present only at some rare locations. The TiC layers were oxidized in situ for 2min in CO(2)/H(2) prior to the alumina layer deposition. For all three samples chemical analyses show that the whole TiC layer is oxidized. On the c- and a-surfaces the TiC layer was oxidized to an fcc TiCO phase. On the r-surface the oxidation stage resulted in a transformation of the initially deposited fcc TiC to a monoclinic TiCO phase, which appears to be a modified TiO structure with a high carbon content.
|
|
| 6. |
- Cheng, Kimberley, et al.
(författare)
-
Rapana thomasiana hemocyanin (RtH): Comparison of the two isoforms, RtH1 and RtH2, at 19 angstrom 16 angstrom resolution
- 2006
-
Ingår i: Micron. - : Elsevier BV. - 0968-4328 .- 1878-4291. ; 37:6, s. 566-576
-
Forskningsöversikt (refereegranskat)abstract
- Three-dimensional (3D) reconstructions of the two 8.4 MDa Rapana thomasiana hemocyanin isoforms, RtH1 and RtH2, have been obtained by cryoelectron microscopy of molecules embedded in vitreous ice and single particle image processing. The final 3D structures of the RtH1 and RtH2 didecamers at 19 angstrom and 16 angstrom resolution, respectively, are very similar to earlier reconstructions of gastropodan hemocyanins, revealing structural features such as the obliquely oriented subunits, the five- and two-fold symmetrical axes. Three new interactions are defined; two of them connecting the arch and the wall while the third is formed between the collar and the wall. The collar-wall connection and one of the arch-wall connections are positioned between two individual subunit dimers, while the second arch-wall connection is located between two subunits within the subunit dimer. All three interactions establish connections to the first tier of the wall. Furthermore, for each interaction we have allocated two first tier functional units most likely involved in forming the connections. (
|
|
| 7. |
- Chinga-Carrasco, Gary, et al.
(författare)
-
Micro-structural characterisation of homogeneous and layered MFC nano-composites
- 2013
-
Ingår i: Micron. - : Elsevier BV. - 0968-4328 .- 1878-4291. ; 44:1, s. 331-338
-
Tidskriftsartikel (refereegranskat)abstract
- The complementary capabilities of various characterisation methods for micro-structural assessment are demonstrated. The assessed structures were composed of unbleached microfibrillated cellulose (MFC) in combination with bleached and 2,2,6,6-tetramethylpiperidinyl-1-oxyl (TEMPO) pre-treated MFC materials. The biodegradable nano-composites were thus characterised in detail, including laser profilometry, scanning electron microscopy (SEM) in high and low vacuum modes, and field-emission SEM. The distribution of the unbleached MFC materials was assessed by staining the unbleached MFC with osmium tetroxide (OsO4), which reacts with CC double bonds encountered in lignin. In addition, some properties of the MFC nano-composite films were tested, i.e. tensile properties, water wettability and oxygen permeability. In general, the group of characteristics of the nano-composite MFC films was better than the properties of the films made of the neat MFC qualities. This indicates that mixing complementary MFC qualities could give synergetic effects that are not exploited completely when using the MFC qualities separately. The study thus confirms the suitability of unbleached MFC materials as a component in multilayer structures, for example biodegradable packaging applications.
|
|
| 8. |
- Chinga-Carrasco, Gary
(författare)
-
Optical methods for the quantification of the fibrillation degree of bleached MFC materials
- 2013
-
Ingår i: Micron. - : Elsevier BV. - 0968-4328 .- 1878-4291. ; 48, s. 42-48
-
Tidskriftsartikel (refereegranskat)abstract
- In this study, the suitability of optical devices for quantification of the fibrillation degree of bleached microfibrillated cellulose (MFC) materials has been assessed. The techniques for optical assessment include optical scanner, UV-vis spectrophotometry, turbidity, quantification of the fiber fraction and a camera system for dynamic measurements. The results show that the assessed optical devices are most adequate for quantification of the light transmittance of bleached MFC materials. Such quantification yields an estimation of the fibrillation degree. Films made of poorly fibrillated materials are opaque, while films made of highly fibrillated materials containing a major fraction of nanofibrils are translucent, with light transmittance larger than 90%. Finally, the concept of using images acquired with a CCD camera system, for estimating the fibrillation degree in dynamic conditions was exemplified. Such systems are most interesting as this will widen the applicability of optical methods for quantification of fibrillation degree online in production lines, which is expected to appear in the years to come.
|
|
| 9. |
- Chinga-Carrasco, Gary, et al.
(författare)
-
The effect of residual fibres on the micro-topography of cellulose nanopaper
- 2014
-
Ingår i: Micron. - : Elsevier BV. - 0968-4328 .- 1878-4291. ; 56, s. 80-84
-
Tidskriftsartikel (refereegranskat)abstract
- Nanopaper is a new material concept composed of nanocellulose, which has been proposed for a series of applications. Recently, the surface of nanopapers has also been emphasized as an important structure to control. This is due to the potential of nanopaper structures as a substrate for printing functionality, which could expand the applicability of nanopaper as a functionalized biomaterial. In this study, we demonstrate how the roughness of nanopaper is affected by the fraction of residual fibres that were not fibrillated into nanofibrils after a homogenization procedure. The topography and morphology were assessed with laser profilometry, atomic force microscopy and scanning (transmission) electron microscopy. The results show a linear correlation between the estimated fraction of residual fibres and the roughness of the assessed nanopapers. Furthermore, the fraction of residual fibres can be reduced by fractionating the nanocellulose, which is demonstrated in the present work. Such knowledge will be valuable for designing nanopaper surfaces with specific structural characteristics.
|
|
| 10. |
- Estradé, S., et al.
(författare)
-
Distinguishing the core from the shell in MnOx/MnOy and FeOx/MnOx core/shell nanoparticles through quantitative electron energy loss spectroscopy (EELS) analysis
- 2012
-
Ingår i: Micron. - : Elsevier BV. - 0968-4328 .- 1878-4291. ; 43:1, s. 30-36
-
Forskningsöversikt (refereegranskat)abstract
- The structural and chemical characterization of inverted bi-magnetic MnOx(antiferromagnetic)/MnOy(ferrimagnetic) and FeOx(soft-ferrimagnetic)/MnOx(hard-ferrimagnetic) core/shell nanoparticles has been carried out by means of scanning transmission electron microscopy with electron energy loss spectroscopy analysis, (S)TEM-EELS. Quantitative EELS was applied to assess the local composition of the nanoparticles by evaluating the local Mn oxidation state based on the Mn L-3/L-2 peak intensity ratio and the Mn L-3 peak onset. The analysis allows to unambiguously distinguish the core from the shell and to determine the nature of the involved manganese oxides in both cases. The results evidence that the structure of the nanoparticles is, in fact, more complex than the one designed by the synthesis parameters.
|
|
