| 1. |
|
|
| 2. |
- Akselsson, Roland, et al.
(författare)
-
Particle Size Distribution and Human Respiratory Deposition of Trace Metals in Indoor Work Environments
- 1976
-
Ingår i: Annals of Occupational Hygiene. - : Oxford University Press (OUP). - 1475-3162. ; 19:3-4, s. 225-238
-
Tidskriftsartikel (refereegranskat)abstract
- Respiratory response to inhalation of fine particles has been investigated for the aerosol generated by welding. Particles were sampled using a pair of 5-stage cascade impactors operating at 1 l./min flow rate. The subject exhaled into one impactor through an air ballast arrangement, and the other impactor simultaneously sampled the surrounding air. Particle size fractions were analyzed for principal elemental constituents from sulphur to lead using proton induced X-ray emission, PIXE. The results indicated a complex respiratory response, including both increase in particle size due to exposure to high humidity in the respiratory tract and deposition of particles during inhalation. The response was found to be different for the element group Mn, Cr, Fe, Ni compared to the group K, Ca, Ti by observing the associations among the elements as a function of particle size in the inhaled and exhaled aerosol. However, for respiratory deposition efficiency alone in all runs averaged together, no systematic differences between the different elements are demonstrated at the 99 % confidence level.
|
|
| 3. |
- Andersson, Ing-Marie, et al.
(författare)
-
What pupils in vocational schools learn about risk at work
- 2015
-
Ingår i: The Annals of Occupational Hygiene. - : Oxford University Press (OUP). - 1475-3162.
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Negative health effects because of poor work environment is more common among young workers compared to older. One explanation might be that younger ones have a low awareness of risk, a lack of safety training, and inadequate introductions to the work. A study has been made focusing on the pupils in vocational schools knowledge and experiences about potential work environment risks in their future work. Questionnaires were distributed to 239 pupils in ten Swedish upper secondary schools’ graduating classes in four vocational programs focusing on basic knowledge about health risks at work as well as the work environment legislation. The programs were the Industrial Technology Program, the Restaurant Management and Food Program, the Transport Program, and the Handicraft Program (in which students specialize in wood). The results from the questionnaires were followed up with focus group discussions. The results showed that the pupils in general had limited knowledge that employers must, by law, conduct risk analyses and prevent risks. It was common that they mentioned themselves as the main responsible to work safe and was not clear about the employers’ duty to arrange for safe work. Pupils in all programs mentioned acute risk as the biggest risk at work. It was concluded that a systematic approach to pupils’ training in work environment is lacking. The results indicates a clear gap between what knowledge the pupils are offered and what’s intended by laws as well as state-of-the-art in occupational health risk research.
|
|
| 4. |
- Andersson, Lena, et al.
(författare)
-
Estimating trends in quartz exposure in Swedish iron foundries : predicting past and present exposures
- 2012
-
Ingår i: Annals of Occupational Hygiene. - Oxford, United Kingdom : Oxford University Press. - 0003-4878 .- 1475-3162. ; 56:3, s. 362-372
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Swedish foundries have a long tradition of legally required surveys in the work place that, from the late 1960s onwards, included measurements of quartz. The availability of exposure data spanning almost 40 years presents a unique opportunity to study trends over that time and to evaluate the validity of exposure models based on data from shorter time spans. The aims of this study were (i) to investigate long term trends in quartz exposure over time, (ii) using routinely collected quartz exposure measurements to develop a mathematical model that could predict both historical and current exposure patterns, and (iii) to validate this exposure model with up-to-date measurements from a targeted survey of the industry.Methods: Eleven foundries, representative of the Swedish iron foundry industry, were divided into three groups based on the size of the companies, i.e. the number of employees. A database containing 2333 quartz exposure measurements for 11 different job descriptionswas used to create three models that covered time periods which reflected different work conditions and production processes: a historical model (1968– 1989), a development model (1990–2004), and a validation model (2005–2006). A linear mixed model for repeated measurements was used to investigate trends over time. In all mixed models, time period, company size, and job title were included as fixed (categorical) determinants of exposure. The within- and between-worker variances were considered to be random effects. A linear regression analysis was erformed to investigate agreement between the models. The average exposure was estimated for each combination of job title and company size.Results: A large reduction in exposure (51%) was seen between 1968 and 1974 and between 1975 and 1979 (28%). In later periods, quartz exposure was reduced by 8% per 5 years at best. In the first period, employees at smaller companies experienced ~50%higher exposure levels than those at large companies, but these differences became much smaller in later years. The furnace and ladle repair job were associated with the highest exposure, with 3.9–8.0 times the average exposure compared to the lowest exposed group. Without adjusting for this autonomous trend over time, predicting early historical exposures using our development model resulted in a statistically significant regression coefficient of 2.42 (R2 5 0.81), indicating an underestimation of historical exposure levels. Similar patterns were seen for other historical time periods. Comparing our development model with our validation model resulted in a statistically significant regression coefficient of 0.31, indicating an overestimation of current exposure levels.Conclusion: To investigate long-term trends in quartz exposure over time, overall linear trends can be determined by using mixed model analysis. To create individual exposure measures to predict historical exposures, it is necessary to consider factors such as the time period, type of job, type of company, and company size. The mixed model analysis showed systematic changes in concentration levels, implying that extrapolation of exposure estimates outside the range of years covered by measurements may result in underestimation or overestimation of exposure.
|
|
| 5. |
- Antonsson, Ann-Beth, 1956-, et al.
(författare)
-
Fatal Carbon Monoxide Intoxication After AcetyleneGas Welding of Pipes
- 2013
-
Ingår i: Annals of Occupational Hygiene. - : Oxford University Press. - 0003-4878 .- 1475-3162. ; 57:5, s. 662-666
-
Tidskriftsartikel (refereegranskat)abstract
- Acetylene gas welding of district heating pipes can result in exposure to high concentrations of carbon monoxide. A fatal case due to intoxication is described. Measurements of carbon monoxide revealed high levels when gas welding a pipe with closed ends. This fatality and these measurements highlight a new hazard, which must be promptly prevented.
|
|
| 6. |
|
|
| 7. |
|
|
| 8. |
- Arshadi, Mehrdad, et al.
(författare)
-
Emission of Volatile Aldehydes and Ketones from Wood Pellets under Controlled Conditions
- 2009
-
Ingår i: Annals of Occupational Hygiene. - : Oxford University Press (OUP). - 0003-4878 .- 1475-3162. ; 53, s. 797-805
-
Tidskriftsartikel (refereegranskat)abstract
- Different qualities of biofuel pellets were made from pine and spruce sawdust according to an industrial experimental design. The fatty/resin acid compositions were determined by gas chromatography-mass spectrometry for both newly produced pellets and those after 2 and 4 weeks of storage. The aldehydes/ketones compositions were determined by high performance liquid chromatography at 0, 2, and 4 weeks. The designs were analyzed for the response variables: total fatty/resin acids and total aldehydes/ketones. The design showed a strong correlation between the pine fraction in the pellets and the fatty/resin acid content but the influence decreased over storage time. The amount of fatty/resin acids decreased similar to 40% during 4 weeks. The influence of drying temperature on the aldehyde/ketone emission of fresh pellets was also shown. The amounts of emitted aldehydes/ketones generally decreased by 45% during storage as a consequence of fatty/resin acid oxidation. The matrices of individual concentrations were subjected to multivariate data analysis. This showed clustering of the different experimental runs and demonstrated the important mechanism of fatty/resin acid conversion.
|
|
| 9. |
- Bartley, D., et al.
(författare)
-
Measurement Uncertainty
- 2008
-
Ingår i: Ann. occup. Hyg.. - : Oxford University Press (OUP). ; 52, s. 413-417
-
Tidskriftsartikel (refereegranskat)
|
|
| 10. |
|
|
