| 1. |
- Abdi, Abdulhakim
(författare)
-
Land cover and land use classification performance of machine learning algorithms in a boreal landscape using Sentinel-2 data
- 2020
-
Ingår i: GIScience and Remote Sensing. - : Informa UK Limited. - 1548-1603 .- 1943-7226. ; 57:1, s. 1-20
-
Tidskriftsartikel (refereegranskat)abstract
- In recent years, the data science and remote sensing communities have started to align due to user-friendly programming tools, access to high-end consumer computing power, and the availability of free satellite data. In particular, publicly available data from the European Space Agency’s Sentinel missions have been used in various remote sensing applications. However, there is a lack of studies that utilize these data to assess the performance of machine learning algorithms in complex boreal landscapes. In this article, I compare the classification performance of four non-parametric algorithms: support vector machines (SVM), random forests (RF), extreme gradient boosting (Xgboost), and deep learning (DL). The study area chosen is a complex mixed-use landscape in south-central Sweden with eight land-cover and land-use (LCLU) classes. The satellite imagery used for the classification were multi-temporal scenes from Sentinel-2 covering spring, summer, autumn and winter conditions. Using stratified random sampling, each LCLU class was allocated 1477 samples, which were divided into training (70%) and evaluation (30%) subsets. Accuracy was assessed through metrics derived from an error matrix, but primarily overall accuracy was used in allocating algorithm hierarchy. A two-proportion Z-test was used to compare the proportions of correctly classified pixels of the algorithms and a McNemar’s chi-square test was used to compare class-wise predictions. The results show that the highest overall accuracy was produced by support vector machines (0.758 ± 0.017), closely followed by extreme gradient boosting (0.751 ± 0.017), random forests (0.739 ± 0.018), and finally deep learning (0.733 ± 0.0023). The Z-test comparison of classifiers showed that a third of algorithm pairings were statistically different. On a class-wise basis, McNemar’s test results showed that 62% of class-wise predictions were significant from one another at the 5% level or less. Variable importance metrics show that nearly half of the top twenty Sentinel-2 bands belonged to the red edge (25%) and shortwave infrared (23%) portions of the electromagnetic spectrum, and were dominated by scenes from spring (38%) and summer (40%). The results are discussed within the scope of recent studies involving machine learning and Sentinel-2 data and key knowledge gaps identified. The article concludes with recommendations for future research.
|
|
| 2. |
- Ahmadlou, Mohammad, et al.
(författare)
-
The use of maximum entropy and ecological niche factor analysis to decrease uncertainties in samples for urban gain models
- 2023
-
Ingår i: GIScience & Remote Sensing. - : Taylor & Francis. - 1548-1603 .- 1943-7226. ; 60:1
-
Tidskriftsartikel (refereegranskat)abstract
- Uncertainty is a common problem in spatial modeling and geographical information systems (GIS). Furthermore, urban gain modeling (UGM) contains various dimensions and components of uncertainties. Data sampling is important in UGM, and may cause the results of the models to contain many uncertainties as well as affects their precision and accuracy. A poorly sampled or biased dataset can lead to inaccurate predictions and decreased performance of the models. This paper aims to present and develop novel strategies for sampling and building training datasets that can enhance the performance of data-driven models. In other words, the present study used maximum entropy (ME) and ecological niche factor analysis (ENFA) models to select pure non-change samples with minimal uncertainty for training datasets in UGM of Isfahan and Tabriz cities in Iran. The urban gain of two time intervals of 1992–2002 and 2002–2012 were used for Tabriz City and two time intervals of 1994–2004 and 2004–2014 for Isfahan City. Nine and 14 urban gain drivers were used in the UGM of Isfahan and Tabriz cities, respectively. After the ME and ENFA models produced a training dataset with change and non-change samples with the lowest uncertainty, three well-known models, namely random forest (RF), artificial neural network (ANN), and support vector machine (SVM) were used for the modeling. Moreover, the ME and ENFA models that were used to investigate the uncertainty of the sampling procedure were used as the one-class prediction models. Compared to extant studies, the proposed ME – based sampling strategy increased the area under the receiver operating characteristic curve (AUROC), figure of merit, producer’s accuracy, and overall accuracy by 5.5%, 5%, 5%, and 3%, respectively, in the validation phase of Isfahan City and by 5%, 6%, 14%, and 17%, respectively, for Tabriz City. For Isfahan, the accuracies of ME (AUROC = 0.649) and ENFA (AUROC = 0.661) one – class models were closer to that of the ANN – ME (AUROC = 0.646), ANN – ENFA (AUROC = 0.619), and RF – ENFA (AUROC = 0.631) models but differed significantly from that of the RF – ME (AUROC = 0.737) model. For Tabriz, the accuracies of ME (AUROC = 0.657) and ENFA (AUROC = 0.688) one – class models were lower than that of the two class RF-ME (AUROC = 0.852), and ANN-ME (AUROC = 0.778) models. The results showed that the ME model was able to identify relatively pure non-change samples and properly remove impure non-change samples from the training dataset. This study discovered that binary models are preferable to one-class models, and showed that an optimal sampling strategy is an essential step in UGM as it can decrease uncertainty. As such, modelers must adopt efficient sampling methods.
|
|
| 3. |
- Chen, Yuwen, et al.
(författare)
-
Exploring the potential of transmittance vegetation indices for leaf functional traits retrieval
- 2023
-
Ingår i: GIScience and Remote Sensing. - : Informa UK Limited. - 1548-1603 .- 1943-7226. ; 60:1
-
Tidskriftsartikel (refereegranskat)abstract
- Leaf functional traits are key indicators of plant functions useful for inferring complex plant processes, including their responses to environmental changes. Vegetation indices (VIs) composed of a few reflectance wavelengths hold the advantages of being relatively simple and effective and have been widely used within remote sensing to estimate leaf traits. However, the difference between the reflectance from the upper and lower part of the leaf suggests that leaf reflectance mainly provides one-sided information, constraining its ability to estimate leaf functional traits. Leaf transmittance, on the other hand, gives information about the whole leaf and has more potential to be sensitive to changes in leaf biochemistry. As transmittance-based VI is rare, this study aims to propose new transmittance-based VIs for accurate estimations of leaf traits. Three forms, i.e. the normalized difference VI, the simple ratio VI, and the difference VI were employed, and wavelength selection for transmittance-based and reflectance-based VIs were conducted, respectively. The applicability of these VIs for estimating four leaf functional traits (leaf chlorophyll (Cab), leaf carotenoids (Car), equivalent water thickness (EWT), and leaf mass per area (LMA)) were evaluated. Cross-validation using three datasets of field observations and sensitivity analysis showed that the VIs constructed using transmittance were relatively less affected by interferences from other leaf parameters, improving the estimation accuracy of Car, EWT, and LMA compared to their optimal reflectance counterparts (RMSE reduced by 2% to 15%, and MAE reduced by 7% to 20% for the pooled dataset). Our study revealed that the normalized difference VI based on transmittance showed considerable sensitivity to Car, EWT, and LMA, whereas the difference VI based on reflectance was effective in indicating Cab. The proposed transmittance-based VIs will aid remote monitoring of leaf traits and thereby plant adaptations and acclimation to changes in environmental conditions.
|
|
| 4. |
- Li, Niwen
(författare)
-
Applicability of UAV-based optical imagery and classification algorithms for detecting pine wilt disease at different infection stages
- 2023
-
Ingår i: GIScience and Remote Sensing. - : Informa UK Limited. - 1548-1603 .- 1943-7226. ; 60
-
Tidskriftsartikel (refereegranskat)abstract
- As a quarantine disease with a rapid spread tendency in the context of climate change, accurate detection and location of pine wilt disease (PWD) at different infection stages is critical for maintaining forest health and being highly productivity. In recent years, unmanned aerial vehicle (UAV)-based optical remote-sensing images have provided new instruments for timely and accurate PWD monitoring. Numerous corresponding analysis algorithms have been proposed for UAV-based image classification, but their applicability of detecting different PWD infection stages has not yet been evaluated under a uniform conditions and criteria. This research aims to systematically assess the performance of multi-source images for detecting different PWD infection stages, analyze effective classification algorithms, and further analyze the validity of thermal images for early detection of PWD. In this study, PWD infection was divided into four stages: healthy, chlorosis, red and gray, and UAV-based hyperspectral (HSI), multispectral (MSI), and MSI with a thermal band (MSI&TIR) datasets were used as the data sources. Spectral analysis, support vector machine (SVM), random forest (RF), two- and three-dimensional convolutional network (2D- and 3D-CNN) algorithms were applied to these datasets to compare their classification abilities. The results were as follows: (I) The classification accuracy of the healthy, red, and gray stages using the MSI dataset was close to that obtained when using the MSI&TIR dataset with the same algorithms, whereas the HSI dataset displayed no obvious advantages. (II) The RF and 3D-CNN algorithms were the most accurate for all datasets (RF: overall accuracy = 94.26%, 3D-CNN: overall accuracy = 93.31%), while the spectral analysis method is also valid for the MSI&TIR dataset. (III) Thermal band displayed significant potential in detection of the chlorosis stage, and the MSI&TIR dataset displayed the best performance for detection of all infection stages. Considering this, we suggest that the MSI&TIR dataset can essentially satisfy PWD identification requirements at various stages, and the RF algorithm provides the best choice, especially in actual forest investigations. In addition, the performance of thermal imaging in the early monitoring of PWD is worthy of further investigation. These findings are expected to provide insight into future research and actual surveys regarding the selection of both remote sensing datasets and data analysis algorithms for detection requirements of different PWD infection stages to detect the disease earlier and prevent losses.
|
|
| 5. |
- Mohammadi, Babak, et al.
(författare)
-
The superiority of the Adjusted Normalized Difference Snow Index (ANDSI) for mapping glaciers using Sentinel-2 multispectral satellite imagery
- 2023
-
Ingår i: GIScience and Remote Sensing. - 1548-1603. ; 60:1
-
Tidskriftsartikel (refereegranskat)abstract
- Accurate monitoring of glaciers’ extents and their dynamics is essential for improving our understanding of the impacts of climate and environmental changes in cold regions. The satellite-based Normalized Difference Snow Index (NDSI) has been widely used for mapping snow cover and glaciers around the globe. However, mapping glaciers in snow-covered areas using existing indices remains a challenging task due to their incapabilities in separating snow, glaciers, and water. This study aimed to evaluate a new satellite-based index and apply machine learning algorithms to improve the accuracy of mapping glaciers. A new index based on satellite data from Sentinel-2 was tested, which we call the Adjusted Normalized Difference Snow Index (ANDSI). ANDSI (besides NDSI) was used with five different machine learning algorithms, namely Artificial Neural Network, C5.0 Decision Tree Algorithm, Naive Bayes classifier, Support Vector Machine, and Extreme Gradient Boosting, to map glaciers, and their performance was evaluated against ground reference data. Four glacierized regions in different countries (Canada, China, Sweden, and Switzerland-Italy) were selected as study sites to evaluate the performance of the proposed ANDSI. Results showed that the proposed ANDSI outperformed the original NDSI, and the C5.0 classifier showed the best overall accuracy and Kappa among the selected five machine learning classifiers in the majority of cases. The original NDSI yielded results with an average overall accuracy of (around) 91% and the proposed ANDSI with (around) 95% for glacier mapping across all models and study regions. This study demonstrates that the proposed ANDSI serves as a superior and improved method for accurately mapping glaciers in cold regions.
|
|
