| 1. |
- Anesater, Erik, et al.
(författare)
-
A Rigid Disc for Protection of Exposed Blood Vessels During Negative Pressure Wound Therapy
- 2013
-
Ingår i: Surgical Innovation. - : SAGE Publications. - 1553-3506 .- 1553-3514. ; 20:1, s. 74-80
-
Tidskriftsartikel (refereegranskat)abstract
- Background. There are increasing reports of serious complications and deaths associated with negative pressure wound therapy (NPWT). Bleeding may occur when NPWT is applied to a wound with exposed blood vessels. Inserting a rigid disc in the wound may protect these structures. The authors examined the effects of rigid discs on wound bed tissue pressure and blood flow through a large blood vessel in the wound bed during NPWT. Methods. Wounds were created over the femoral artery in the groin of 8 pigs. Rigid discs were inserted. Wound bed pressures and arterial blood flow were measured during NPWT. Results. Pressure transduction to the wound bed was similar for control wounds and wounds with discs. Blood flow through the femoral artery decreased in control wounds. When a disc was inserted, the blood flow was restored. Conclusions. NPWT causes hypoperfusion in the wound bed tissue, presumably as a result of mechanical deformation. The insertion of a rigid barrier alleviates this effect and restores blood flow.
|
|
| 2. |
- Angeles Martinez-Maestre, Maria, et al.
(författare)
-
Total Laparoscopic Hysterectomy With and Without Robotic Assistance : A Prospective Controlled Study
- 2014
-
Ingår i: Surgical Innovation. - : SAGE Publications. - 1553-3506 .- 1553-3514. ; 21:3, s. 250-255
-
Tidskriftsartikel (refereegranskat)abstract
- Background. Hysterectomies are very common, and most of them are still performed abdominally. The minimally invasive alternatives are perceived as difficult by gynecologists. Robotic assistance is thought to facilitate laparoscopic surgery. The aim of this study was to compare the surgical outcomes of robotic-assisted and conventional total laparoscopic hysterectomy. Methods. Patients, candidate to hysterectomy for benign indications, were allocated to either robotic or conventional laparoscopy in a quasi-randomized fashion. Patients were operated following a standardized surgical protocol. Main outcome measures were total surgical time, conversions to laparotomy, blood loss, hospital stay, and complications. Results. Fifty-one patients underwent robotic hysterectomy (mean age = 46.59 years) and 54 conventional laparoscopy (mean age = 50.02 years). The groups were homogeneous in body mass index and uterine weight. Robotic-assisted hysterectomies were significantly shorter (154.63 +/- 36.57 vs 185.65 +/- 42.98 minutes in the control group; P =.0001). Patients in the robotic group also had a significantly smaller reduction in hemoglobin (9.69% +/- 8.88% vs 15.29% +/- 8.39% in controls; P =.0012) and hematocrit (10.56% +/- 8.3% vs 14.89% +/- 8.11%; P =.008). No intraoperative conversions to laparotomy were required. Complication rate was low and similar in both groups. All patients were fully recovered at 1-month follow-up outpatient visit. Conclusions. Significantly lower operative times and blood loss indicate that robotic assistance can facilitate surgery already during the learning curve period. Nevertheless, proficiency can be reached in conventional laparoscopy through training, and the cost-effectiveness of robotic hysterectomy for benign conditions is yet to be confirmed.
|
|
| 3. |
- Ebert, Lars C, et al.
(författare)
-
You Cant Touch This: Touch-free Navigation Through Radiological Images
- 2012
-
Ingår i: Surgical Innovation. - : SAGE Publications (UK and US). - 1553-3506 .- 1553-3514. ; 19:3, s. 301-307
-
Tidskriftsartikel (refereegranskat)abstract
- Keyboards, mice, and touch screens are a potential source of infection or contamination in operating rooms, intensive care units, and autopsy suites. The authors present a low-cost prototype of a system, which allows for touch-free control of a medical image viewer. This touch-free navigation system consists of a computer system (IMac, OS X 10.6 Apple, USA) with a medical image viewer (OsiriX, OsiriX foundation, Switzerland) and a depth camera (Kinect, Microsoft, USA). They implemented software that translates the data delivered by the camera and a voice recognition software into keyboard and mouse commands, which are then passed to OsiriX. In this feasibility study, the authors introduced 10 medical professionals to the system and asked them to re-create 12 images from a CT data set. They evaluated response times and usability of the system compared with standard mouse/keyboard control. Users felt comfortable with the system after approximately 10 minutes. Response time was 120 ms. Users required 1.4 times more time to re-create an image with gesture control. Users with OsiriX experience were significantly faster using the mouse/keyboard and faster than users without prior experience. They rated the system 3.4 out of 5 for ease of use in comparison to the mouse/keyboard. The touch-free, gesture-controlled system performs favorably and removes a potential vector for infection, protecting both patients and staff. Because the camera can be quickly and easily integrated into existing systems, requires no calibration, and is low cost, the barriers to using this technology are low.
|
|
| 4. |
- El-Hussuna, Alaa, et al.
(författare)
-
Patient-Reported Outcome Measures in Colorectal Surgery: Construction of Core Measures Using Open-Source Research Method
- 2021
-
Ingår i: Surgical Innovation. - : SAGE PUBLICATIONS INC. - 1553-3506 .- 1553-3514. ; 28:5, s. 560-566
-
Tidskriftsartikel (refereegranskat)abstract
- Purpose. The primary aim of the study was to review the existing literature about patient-reported outcome measures (PROMs) in colorectal cancer and IBD. The secondary aim was to present a road map to develop a core outcome set via opinion gathering using social media. Method. This study is the first step of a three-step project aimed at constructing simple, applicable PROMs in colorectal surgery. This article was written in a collaborative manner with authors invited both through Twitter via the #OpenSourceResearch hashtag. The 5 most used PROMs were presented and discussed as slides/images on Twitter. Inputs from a wide spectrum of participants including researchers, surgeons, physicians, nurses, patients, and patients organizations were collected and analyzed. The final draft was emailed to all contributors and 6 patients representatives for proofreading and approval. Results. Five PROM sets were identified and discussed: EORTC QLQ-CR29, IBDQ short health questionnaire, EORTC QLQ-C30, ED-Q5-5L, and Short Form-36. There were 315 tweets posted by 50 tweeters with 1458 retweets. Awareness about PROMs was generally limited. The general psycho-physical well-being score (GPP) was suggested and discussed, and then a survey was conducted in which more than 2/3 of voters agreed that GPP covers the most important aspects in PROMs. Conclusion. Despite the limitations of this exploratory study, it offered a new method to conduct clinical research with opportunity to engage patients. The general psycho-physical well-being score suggested as simple, applicable PROMs to be eventually combined procedure-specific, disease-specific, or symptom-specific PROMs if needed.
|
|
| 5. |
- Gambadauro, Pietro, et al.
(författare)
-
Surgical Videos for Accident Analysis, Performance Improvement, and Complication Prevention : Time for a Surgical Black Box?
- 2012
-
Ingår i: Surgical Innovation. - : SAGE Publications. - 1553-3506 .- 1553-3514. ; 19:1, s. 76-80
-
Tidskriftsartikel (refereegranskat)abstract
- Conventional audit of surgical records through review of surgical results provides useful knowledge but hardly helps identify the technical reasons lying behind specific outcomes or complications. Surgical teams not only need to know that a complication might happen but also how and when it is most likely to happen. Functional awareness is therefore needed to prevent complications, know how to deal with them, and improve overall surgical performance. The authors wish to argue that the systematic recording and reviewing of surgical videos, a "surgical black box," might improve surgical care, help prevent complications, and allow accident analysis. A possible strategy to test this hypothesis is presented and discussed. Recording and reviewing surgical interventions, apart from helping us achieve functional awareness and increasing the safety profile of our performance, allows us also to effectively share our experience with colleagues. The authors believe that those potential implications make this hypothesis worth testing.
|
|
| 6. |
- Hagelsteen, Kristine, et al.
(författare)
-
Simball Box for Laparoscopic Training With Advanced 4D Motion Analysis of Skills.
- 2016
-
Ingår i: Surgical Innovation. - : SAGE Publications. - 1553-3506 .- 1553-3514. ; 23:3, s. 309-316
-
Tidskriftsartikel (refereegranskat)abstract
- Laparoscopic skills training and evaluation outside the operating room is important for all surgeons learning new skills. To study feasibility, a video box trainer tracking 4-dimensional (4D) metrics was evaluated as a laparoscopic training tool.
|
|
| 7. |
- Höglund, Odd
(författare)
-
Resorbable Self-Locking Implant for Lung Lobectomy Through Video-Assisted Thoracoscopic Surgery: First Live Animal Application
- 2018
-
Ingår i: Surgical Innovation. - : SAGE Publications. - 1553-3506 .- 1553-3514. ; 25, s. 158-164
-
Tidskriftsartikel (refereegranskat)abstract
- The aim of this pilot test was to test a new self-locking resorbable implant for hilum occlusion during a video-assisted thoracoscopic lung lobectomy in a surviving pig model. Once the thoracic cavity was assessed and structures identified, the right middle lobe and its respective hilum were exposed. The implant was introduced with a semiclosed loop through a working channel and positioned around the pulmonary lobe. Occlusion was performed with a conventional Crile forceps and a laparoscopic Kelly forceps. Lobe section was done with laparoscopic Metzenbaum scissors and tissue removal through the dorsal access. No signs of pneumothorax or bleeding were observed during a 60-day follow-up. Necropsy findings showed minimal pleuritis in caudal access and in the lobar stump. A granulomatous formation was found around a dense, amorphous material, which was identified as remains of a small part of the implant. Histopathological findings showed signs of a chronic healing process without other alterations. The resorbable implant LigaTie appears to exhibit similar handling and application characteristics during surgery as nonsurgical tie wraps. The resorbable implant avoids the uncontrolled substances not suitable for implants of conventional ties. The results of this pilot test suggested the resorbable implant's mechanical properties provided effective tissue support to complete the healing of the pulmonary hilum.
|
|
| 8. |
- Oussi, Ninos, et al.
(författare)
-
Validation of a Novel Needle Holder to Train Advanced Laparoscopy Skills to Novices in a Simulator Environment
- 2020
-
Ingår i: Surgical Innovation. - : Sage Publications. - 1553-3506 .- 1553-3514. ; 27:2, s. 211-219
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Our aim was to determine if a newly designed Najar needle holder (NNH) shortens the time for novices to improve advanced laparoscopy (AL) techniques (suturing/knot tying), compared with a conventional macro needle holder (MNH) in a simulator. Furthermore, we aimed to validate a new video scoring system determining AL skills.Methods: Forty-six medical students performed identical surgical tasks in a prospective, crossover study evaluating AL skills (NNH vs MNH). All subjects performed a double-throw knot, 2 single-throw knots following 3 running sutures in the Simball Box (SB) simulator. After resting, subjects switched needle holders. All tasks were videotaped and analyzed using SB software and by 2 independent reviewers using the Objective Video Evaluation Scoring Table (OVEST). Trial performance expressed as SB Overall Score (SBOS) and OVEST.Results: In the group starting with NNH (followed by MNH) OVEST was consistently high during both trials (median = 12.5, range = 6.5-18.0, and median = 13.5, range = 6.5-21.0; P = .2360). However, in the group starting with MNH, OVEST improved significantly when the participants changed to NNH (median = 10.0, range = 2.5-19.5, vs median = 14.5, range = 4.5-18.0; P = .0003); an improvement was also found with SBOS (median = 37%, range = 27% to 92%, vs median = 48%, range = 34% to 70%; P = .0289). In both trials, both independent reviewers' OVEST measures correlated well: Trial 1: beta = 0.97, P < .0001; and Trial 2: beta = 0.95, P < .0001. A correlation also existed between SBOS and OVEST in both trials (beta = 2.1, P < .0001; and beta = 1.9, P = .0002).Conclusions: This study indicates a significantly higher improvement in laparoscopic suturing skills in novices training AL skills using NNH compared with MNH. Starting early, AL training in novices using NNH is a feasible option. Furthermore, OVEST used in experimental settings as an evaluation tool is comparable with the validated SBOS.
|
|
| 9. |
- Rönnow, Carl-Fredrik, et al.
(författare)
-
Frimand Needle Holder Reduces Suturing Time and Surgical Stress When Suturing in Palm Grip.
- 2016
-
Ingår i: Surgical Innovation. - : SAGE Publications. - 1553-3506 .- 1553-3514. ; 23:3, s. 235-241
-
Tidskriftsartikel (refereegranskat)abstract
- The Frimand needle holder (FNH) was developed to facilitate palm grip suturing. In the present study, we wanted to examine the impact of the FNH compared with a conventional Hegar-styled needle holder (HSNH) on suture time and surgical stress.
|
|
| 10. |
- Tuomi, J, et al.
(författare)
-
A novel classification and online platform for planning and documentation of medical applications of additive manufacturing
- 2014
-
Ingår i: Surgical innovation. - : SAGE Publications. - 1553-3514 .- 1553-3506. ; 21:6, s. 553-559
-
Tidskriftsartikel (refereegranskat)abstract
- Additive manufacturing technologies are widely used in industrial settings and now increasingly also in several areas of medicine. Various techniques and numerous types of materials are used for these applications. There is a clear need to unify and harmonize the patterns of their use worldwide. We present a 5-class system to aid planning of these applications and related scientific work as well as communication between various actors involved in this field. An online, matrix-based platform and a database were developed for planning and documentation of various solutions. This platform will help the medical community to structurally develop both research innovations and clinical applications of additive manufacturing. The online platform can be accessed through http://www.medicalam.info .
|
|
