| 1. |
- Berglund, Johan C, 1978, et al.
(författare)
-
Measuring strategies for smooth tool steel surfaces
- 2008
-
Ingår i: Proceedings. - Aachen : Shaker Verlag. - 1610-4773. - 9783832269128 - 3832269126 ; , s. 110-119
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Comparisons between different measuring strategies were made on three types of smooth tool steel surfaces. Three replica materials were tested to study possibilities within replication techniques. An optical interferometer as well as a mechanical stylus was used to evaluate the surfaces. The results showed that the tested replica materials generated good representations of both the form and the surface roughness (Sq > 300 nm). The evaluated surfaces were quite homogeneous, thus, few measurements are needed to get representative results. However, it was found that caution must be taken regarding manually polished surfaces which can be less homogenous and therefore require more measurements to get representative results.
|
|
| 2. |
- Bååth, Lars B., et al.
(författare)
-
Surface topography with PDI holography
- 2008
-
Ingår i: Proceedings of the XII. International Colloquium on Surfaces. - Aachen : Shaker Verlag. - 9783832269128 ; , s. 10-
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- This paper presents topographic measurements of metal surface with Point Diffraction Interferometer (PDI) technique. Interferogram of a surface is created and recorded with different phase offsets. These are then combined to create a phase offset map of the surface. We demonstrate the use with the presentation of our first surface topographic map
|
|
| 3. |
- Dimkovski, Zlate, 1974-, et al.
(författare)
-
Towards 3D Characterisation of Cylinder Liner Surfaces
- 2008
-
Ingår i: Proceedings / XII. International Colloquium on Surfaces January 28th and 29th, 2008, Chemnitz, Germany = XII. Internationales Oberflächenkolloquium. - Aachen : Shaker Verlag. - 9783832269128 ; , s. 15-24
-
Konferensbidrag (refereegranskat)abstract
- Cylinder liner surface has a direct impact on the oil consumption and frictional losses in the internal combustion engines which are in common interest to be as lower as possible. Thus, the optimisation of the liner surface, its function and manufacture is often on the agenda of the automotive industry. Since the liner surface finish is a subject of improving, there is a need of improving and facilitating of its 3D characterisation preliminary when the parameter control limits are unknown, as well as later when it is experimentally verified and the limits are better determined. For that purpose a method for quality control in 3D of cylinder liners is proposed here. A tool was developed and implemented for rating of cylinder liner surfaces, computing of 3D groove parameters (groove width, height and distance between grooves) and determination of a needed number of measurements.
|
|
| 4. |
- Rosén, Bengt-Göran, 1962-
(författare)
-
Towards optimal sampling of surface roughness
- 2008
-
Ingår i: Proceedings / XII. International Colloquium on Surfaces January 28th and 29th, 2008, Chemnitz, Germany = XII. Internationales Oberflächenkolloquium. - Aachen : Shaker Verlag. - 9783832269128 ; , s. 383-392
-
Konferensbidrag (refereegranskat)
|
|
