| 1. |
- Alinasab, Babak, et al.
(författare)
-
New algorithm for the management of orbital blowout fracture based on prospective study
- 2018
-
Ingår i: Craniomaxillofacial Trauma & Reconstruction. - : SAGE Publications. - 1943-3875 .- 1943-3883. ; 11:4, s. 285-295
-
Tidskriftsartikel (refereegranskat)abstract
- Despite extensive debate and publications in the management of blowout fracture (BOF), there are still considerable differences in the surgeons' management of BOF due to a lack of reliable evidence-based studies. This article aimed to evaluate which BOF patients require surgical treatment due to functional and/or cosmetic deformities; evaluate which computed tomography (CT) scan findings predict these problems; and provide an algorithm in the management of BOF. Seventy-nine patients with BOF were treated conservatively and followed up prospectively regarding functional and cosmetic deformities for at least 1 year. The patients' CT scans were analyzed and several measurements were performed. Patients' symptoms and the clinical findings were correlated to the CT scan measurements. We found visible deformity in 37% of the patients, but only 10% chose to proceed to surgery due to cosmetic deformities. In patients with inferior BOF and a herniation < 1.0 mL, a visible deformity was found when the ratio between fracture and the fractured orbital wall areas was ≥42%, or the total area of the fracture was ≥ 2.3 cm 2 . In patients with inferior BOF and a herniation ≥ 1.0 mL, a visible deformity was found when the distance from the inferior orbital rim to the posterior edge of the fracture was ≥ 3.0 cm. In patients with inferomedial fracture, a visible deformity was found when the herniation was ≥ 0.9 mL. Diplopia improved significantly and remained in only 3% of the patients in nonoperated group. Hypoesthesia of the infraorbital nerve improved significantly, but 23% of the nonoperated and 50% of the operated patients still experienced loss of sensation at final control. In this prospective study, we found that not only herniated orbital volume but also other CT scan findings in BOF were crucial to predict late visible deformities. Based on these findings, we propose an algorithm for the prediction of late visible deformity with 83% accuracy. There are indications that diplopia without ocular motility disorder is due to edema and we recommend observation as long as the diplopia improves gradually.
|
|
| 2. |
- Alinasab, Babak, et al.
(författare)
-
Prospective randomized controlled pilot study on orbital blowout fracture
- 2018
-
Ingår i: Craniomaxillofacial Trauma & Reconstruction. - : SAGE Publications. - 1943-3875 .- 1943-3883. ; 11:3, s. 165-171
-
Tidskriftsartikel (refereegranskat)abstract
- To clarify the conflicting recommendations for care of blowout fracture (BOF), a prospective randomized study is required. Here, we present a prospective randomized pilot study on BOF. This article aimed to evaluate which computed tomography (CT) findings predict late functional and/or cosmetic symptoms in BOF patients with ≥ 1.0 mL herniation of orbital content into maxillary and/or ethmoidal sinuses. It also aimed to evaluate which patients with BOF would benefit from surgical treatment or observational follow-up. Twenty-six patients with BOF ≥ 1.0 mL herniation were randomized to observational ( n = 10) or surgical treatments ( n = 16) and were followed up for functional and cosmetic symptoms for at least 1 year. The results from CT scan measurements were correlated to the patients' symptoms and clinical findings which we report in this pilot study. Of the 10 patients randomized to observation, five had an inferomedial BOF with a herniation of ≥ 1.3 mL and all patients developed cosmetic deformities and required surgery. The remaining five patients in the observational group had inferior BOF and one of them had a distance of 3.3 cm from the inferior orbital rim to the posterior edge of the fracture and developed a cosmetic deformity but was unwilling to proceed to surgical treatment, and four patients had a median distance of 2.9 cm from the inferior orbital rim to the posterior edge of the fracture and did not develop cosmetic deformities. The median time from injury to surgery was 13 (3-17) days for the surgical group and 37 (17-170) days for the patients who underwent surgery in the observational group. The surgical results were similar for all the operated patients at the final control. Diplopia decreased and remained partly in one patient in the surgical group and in two patients in the observational group. Hypoesthesia of the infraorbital nerve decreased in nonsurgically treated patients, but surgery seemed to induce hypoesthesia. In this prospective randomized controlled pilot study on BOF, all patients in the observational group with inferomedial fractures developed visible deformity. Diplopia in BOF, without ocular motility limitation, is believed to be due to edema. Diplopia is not an indication for surgery as long as it reduces over time.
|
|
| 3. |
- Dérand, Per, et al.
(författare)
-
Imaging, virtual planning, design and production of patient specific implants and clinical validation in cranio-maxillo-facial surgery
- 2012
-
Ingår i: Cranial maxillofacial Trauma and Reconstruction. - : SAGE Publications. - 1943-3875 .- 1943-3883. ; 5:3, s. 137-144
-
Tidskriftsartikel (refereegranskat)abstract
- The purpose of this article was to describe the workflow from imaging, via virtual design, to manufacturing of patient-specific titanium reconstruction plates, cutting guide and mesh, and its utility in connection with surgical treatment of acquired bone defects in the mandible using additive manufacturing by electron beam melting (EBM). Based on computed tomography scans, polygon skulls were created. Following that virtual treatment plans entailing free microvascular transfer of fibula flaps using patient-specific reconstruction plates, mesh, and cutting guides were designed. The design was based on the specification of a Compact UniLOCK 2.4 Large (Synthes®, Switzerland). The obtained polygon plates were bent virtually round the reconstructed mandibles. Next, the resections of the mandibles were planned virtually. A cutting guide was outlined to facilitate resection, as well as plates and titanium mesh for insertion of bone or bone substitutes. Polygon plates and meshes were converted to stereolithography format and used in the software Magics for preparation of input files for the successive step, additive manufacturing. EBM was used to manufacture the customized implants in a biocompatible titanium grade, Ti6Al4V ELI. The implants and the cutting guide were cleaned and sterilized, then transferred to the operating theater, and applied during surgery. Commercially available software programs are sufficient in order to virtually plan for production of patient-specific implants. Furthermore, EBM-produced implants are fully usable under clinical conditions in reconstruction of acquired defects in the mandible. A good compliance between the treatment plan and the fit was demonstrated during operation. Within the constraints of this article, the authors describe a workflow for production of patient-specific implants, using EBM manufacturing. Titanium cutting guides, reconstruction plates for fixation of microvascular transfer of osteomyocutaneous bone grafts, and mesh to replace resected bone that can function as a carrier for bone or bone substitutes were designed and tested during reconstructive maxillofacial surgery. A clinically fit, well within the requirements for what is needed and obtained using traditional free hand bending of commercially available devices, or even higher precision, was demonstrated in ablative surgery in four patients.
|
|
| 4. |
- Dubron, K, et al.
(författare)
-
Incidence, Aetiology, and Associated Fracture Patterns of Infraorbital Nerve Injuries Following Zygomaticomaxillary Complex Fractures: A Retrospective Analysis of 272 Patients
- 2022
-
Ingår i: Craniomaxillofacial trauma & reconstruction. - : SAGE Publications. - 1943-3875 .- 1943-3883. ; 15:2, s. 139-146
-
Tidskriftsartikel (refereegranskat)abstract
- Retrospective study. Objective: Zygomaticomaxillary complex (ZMC) fractures are common facial injuries with heterogeneity regarding aetiologies, fracture types, infraorbital nerve (ION) involvement, and treatment methods. The aim of this study was to identify associations between aetiologies, fracture types, and neurological complications. Additionally, treatment methods and recovery time were investigated. Methods: Medical files of 272 patients with unilateral and bilateral ZMC fractures were reviewed, whose cases were managed from January 2014 to January 2019 at the Department of Oral and Maxillofacial Surgery, University hospitals Leuven, Belgium. History of ION sensory dysfunction and facial nerve motoric dysfunction were noted during follow-up. Results: ION hypoaesthesia incidence was 37.3%, with the main causes being fall accidents, road traffic accidents, and interpersonal violence. Significant predictors of ION hypoaesthesia were Zingg type B fractures ( P = 0.003), fracture line course through the infraorbital canal ( P < .001), orbital floor fracture ( P < 0.001), and ZMC dislocation or mobility ( P = 0.001). Conclusion: Of all ZMC fractures, 37.3% exhibited ION hypoaesthesia. Only ZMC Zingg type B fractures (74.0%) were significantly more associated with ION hypoaesthesia. ION hypoesthesia was more likely (OR = 2.707) when the fracture line course ran through the infraorbital canal, and was less dependent on the degree of displacement. Neuropathic pain symptoms developed after ZMC fractures in 2.2% patients, posing a treatment challenge. Neuropathic pain symptoms were slightly more common among women, and were associated only with type B or C fractures. No other parameters were found to predict the outcome of this post-traumatic neuropathic pain condition.
|
|
| 5. |
- Kumar, Vinay V., et al.
(författare)
-
Segmental Mandibular Reconstruction Using Tissue Engineering Strategies : A Systematic Review of Individual Patient Data
- 2020
-
Ingår i: Craniomaxillofacial Trauma & Reconstruction. - : SAGE Publications. - 1943-3875 .- 1943-3883. ; 13:4, s. 267-284
-
Forskningsöversikt (refereegranskat)abstract
- Objective: The aim of the systematic review was to analyze the current clinical evidence concerning the use of tissue engineering as a treatment strategy for reconstruction of segmental defects of the mandible and their clinical outcomes using individual patient data.Methods: A systematic review of the literature was conducted using PubMed and Cochrane Library on May 21, 2019. The eligibility criteria included patients in whom segmental mandibular reconstruction was carried out using tissue engineering as the primary treatment strategy. After screening and checking for eligibility, individual patient data were extracted to the extent it was available. Data extraction included the type of tissue engineering strategy, demographics, and indication for treatment, and outcomes included clinical and radiographic outcome measures, vitality of engineered bone, dental rehabilitation, and patient-reported outcome measures and complications.Results: Out of a total of 408 articles identified, 44 articles reporting on 285 patients were included, of which 179 patients fulfilled the inclusion criteria. The different tissue engineering treatment strategies could be broadly classified into 5 groups: "prefabrication," "cell culture," "bone morphogenetic protein (BMP) without autografts," "BMP with autografts," and "scaffolds containing autografts." Most included studies were case reports or case series. A wide variety of components were used as scaffolds, cells, and biological substances. There was not a single outcome measure that was both objective and consistently reported, although most studies reported successful outcome.Discussion: A wide variety of tissue engineering strategies were used for segmental mandibular reconstruction that could be classified into 5 groups. Due to the low number of treated patients, lack of standardized and consistent reporting outcomes, lack of comparative studies, and low evidence of reported literature, there is insufficient evidence to recommend any particular tissue engineering strategy.
|
|
| 6. |
- Lindell, Björn, et al.
(författare)
-
A Case of Glenoid Fossa Fracture, Progressive Ankylosis, Total Joint Reconstruction with Alloplastic Prosthesis to Normalized Function Including Evaluation with F18-PET/CT-a Four Year Follow-up
- 2017
-
Ingår i: Craniomaxillofacial Trauma & Reconstruction. - : THIEME MEDICAL PUBL INC. - 1943-3875 .- 1943-3883. ; 10:1, s. 60-65
-
Tidskriftsartikel (refereegranskat)abstract
- Temporomandibular joint replacement (TJR) with alloplastic prosthesis has shown promising long-term results in end stage joint disorders. We present a case of young woman with painful ankylosis that where reconstructed with TJR, due to a complex mandibular fracture with dislocation of the left condyle into the middle cranial fossa two years earlier. At the age of 18 the subject underwent a total joint replacement with custom-made alloplastic TMJ prosthesis. To determine the bone response and remodeling activity around the prosthesis, a F18 PET/CT-scan was used. No sign of increased remodeling or pathology were seen in the imaging after the reconstruction. Four years postoperatively the subject reports no pain and excellent jaw function.
|
|
| 7. |
- Pansell, T, et al.
(författare)
-
Ophthalmologic findings in patients with non-surgically treated blowout fractures
- 2012
-
Ingår i: Craniomaxillofacial trauma & reconstruction. - : SAGE Publications. - 1943-3875 .- 1943-3883. ; 5:1, s. 1-6
-
Tidskriftsartikel (refereegranskat)abstract
- We evaluated the ocular and visual status in a group of patients with a non-surgically treated blowout fracture. Clinical examination with refraction, test of binocular function, and tear film evaluation was performed in 23 patients. These values were statistically correlated with the orbital volume measurements and ocular finding from the patient records at presentation. About 50% of the study group was symptomatic due to low visual acuity from refractive errors and decompensated phorias as a consequence of the blowout fracture. Several patients displayed changes in tear film production. There was no strong correlation between the measured parameters and orbital volume measurements. Patients with a non-surgically treated blowout fracture often display ocular and visual changes after discharge. A routine visual exam is advocated in all patients after the ocular status has stabilized after a blowout fracture.
|
|
| 8. |
- Politis, C, et al.
(författare)
-
Condylar Fracture in a Child with Entrapment of the Inferior Alveolar Nerve
- 2016
-
Ingår i: Craniomaxillofacial trauma & reconstruction. - : SAGE Publications. - 1943-3875 .- 1943-3883. ; 9:2, s. 149-51
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
- The aim of this article is to report the clinical case of a right subcondylar fracture in a 4-year-old boy. The displaced and medial angulated fragmented mandibular condyle in coexistence with an enlarged lateral pterygoid process was compressing the inferior alveolar nerve (IAN) during its course in the area of the infratemporal fossa. This was expressed by exhibiting a rubbing behavior with resulting superficial ulceration at the right lower lip. Hypoesthesia of the lower lip may be a sign of the IAN entrapment after a subcondylar fracture in a child. In contrast to the adults where an open reduction is necessary to relieve the symptoms of hypoesthesia, in pediatric population, a conservative approach seems sufficient.
|
|
| 9. |
- Rahbin, Samin, et al.
(författare)
-
Differences Between Patient and Surgeon Perspectives : A Long-Term Follow-Up of 180 Patients With Zygomaticomaxillary Complex Fractures Following Either Conservative or Surgical Treatment
- 2023
-
Ingår i: Craniomaxillofacial Trauma & Reconstruction. - : Sage Publications. - 1943-3875 .- 1943-3883.
-
Tidskriftsartikel (refereegranskat)abstract
- Study Design: Retrospective with follow-up. Objective: This study described the long-term outcomes of patients who received either conservative or surgical treatment for zygomaticomaxillary complex (ZMC) fractures. It accounted for the perspectives of both patients and surgeons, and explored factors associated with patient satisfaction. Methods: Patients with unilateral ZMC fractures 2007-2018 were invited to follow-up clinical examinations and photographic documentation. Patient experiences were recorded using a questionnaire. A review panel assessed computed tomography (CT) scans and photographs. Patient and surgeon perspectives of detecting functional sequelae were assessed, and a correlation matrix was used to evaluate different perspectives of perceiving malar asymmetry. Results: The study sample consisted of 180 patients, of which conservative treatment was given to 43 patients and surgical treatment to 137 patients. Median follow-up time was 72.5 months after trauma. Overall satisfaction was 92.8%, with no significant difference between treatment groups. Patients and surgeons showed marked differences in detecting functional sequelae. Predicted malar asymmetry on CT scans did not correlate to findings on photographs or reports by patients. Conclusions: A predicted sunken cheek on CT imaging does not necessarily lead to long-term visible asymmetry of the malar region. Surgeons should acknowledge different perspectives when predicting and assessing long-term sequelae of ZMC fractures, and seek consensus on when to perform surgical reconstructions.
|
|
| 10. |
- Thor, Andreas
(författare)
-
Preoperative Planning of Virtual Osteotomies Followed by Fabrication of Patient Specific Reconstruction Plate for Secondary Correction and Fixation of Displaced Bilateral Mandibular Body Fracture
- 2016
-
Ingår i: Craniomaxillofacial Trauma & Reconstruction. - : SAGE Publications. - 1943-3875 .- 1943-3883. ; 9:2, s. 188-194
-
Tidskriftsartikel (refereegranskat)abstract
- This paper describes the course of treatment of a severely diplaced bilateral mandibular body fracture, where the first osteosynthesis failed. The subject developed an open bite due to a posterior rotation of the distal part of the mandible and anterior rotation of the proximal parts of the mandible. This situation was evaluated with CBCT and the facial skeleton was segmented using computer software. Correct occlusion was virtually established by bilateral virtual osteotomies in the fracture areas of the mandible. After segmentation, the mandible was virtually rotated back into position and the open bite was closed. A patient specific mandibular reconstruction plate was outlined and fabricated from the new virtual situation and the plate was thereafter installed utilizing the preoperative plan. Osteotomy-and drill-guides was used and thus simplified the surgery resulting in uneventful healing. Virtual planning and patient specific implants and guides were valuable in this case of secondary reconstructive trauma surgery.
|
|
