| 1. |
- Martin, Michael, et al.
(författare)
-
Developing Adequate Communication of Waste Footprints of Products for a Circular Economy—A Stakeholder Consultation.
- 2018
-
Ingår i: Resources. - : MDPI. - 2079-9276. ; :78
-
Tidskriftsartikel (refereegranskat)abstract
- Relatively few consumers are conscious of the waste generated in the course of producing the goods that they consume, although most are aware of the amount of waste they dispose of. This article reports on a small-scale survey (N = 28) among stakeholders aimed at developing adequate communication of preconsumer waste footprints of consumer goods in the context of the circular economy. Life cycle assessment (LCA) practitioners and consumers assessed five methodological details of an approach for calculating and communicating a product waste footprint (PWF). Most of the respondents expressed that the guidelines described in the proposed PWF methodology are good enough for the purposes of differentiating waste and byproducts, and defining which material flow shall be accounted for. Some LCA practitioners declared that the proposed streamlined method may not be adequate for conveying the environmental significance of waste types. The respondents also expressed that the PWF concept would be primarily useful and/or needed for consumers and government, and in the contexts of improving environmental awareness of consumers, environmental policy making, visualizing waste flows in a circular economy, and improving resource efficiency in industry, and less useful/needed in a business-to-business context. The PWF has been successfully used by diverse stakeholder groups in Sweden mostly to promote sustainable production and consumption across society. A notable example is the ‘invisible waste’ (#invisiblewaste) campaign of the Swedish Waste Management Association (Avfall Sverige). The concerns of the LCA experts have therefore not held true. The symbolic power and parsimony of the PWF concept appears to be effective in sensitizing consumers towards waste issues so that circular economy strategies beyond recycling are possible to be fully realized.
|
|
| 2. |
- Vassileva, Iana, 1983-, et al.
(författare)
-
From Goals to Action : The Efforts for Increasing Energy Efficiency and Integration of Renewable Sources in Eskilstuna, Sweden
- 2015
-
Ingår i: Resources. - : MDPI AG. - 2079-9276. ; 4:3, s. 548-565
-
Tidskriftsartikel (refereegranskat)abstract
- Cities’ energy usage accounts for two thirds of global primary energy consumption. Energy efficiency in urban areas is, therefore, one of the most important topics to consider when dealing with urban sustainability. This paper evaluates the goals for increasing energy efficiency and use of renewable energy sources in the areas of transportation, buildings and consumers’ awareness, as stated in the Climate action plan, for the municipality of Eskilstuna, Sweden. The efforts of the municipality to successfully reach their energy efficiency goals, are described in this paper including future perspectives. The results show that although the municipality counts with the advantage of owning and working together with the local housing company and energy provider, in order to reach the established goals, additional strategies need to be considered. For an increased use of renewable energy sources, analysis of rooftops suitable for photovoltaic (PV) installation should be carried out as well as the integration of goals for self-consumption. In the transport field, the city needs to prepare for large-scale electric vehicle (EV) market penetration and to consider different bike or car sharing options. Finally, more specific awareness campaigns are needed to engage the citizens in reducing their energy consumption and living a more sustainable life.
|
|
| 3. |
- Bergström, Pauline, et al.
(författare)
-
Sustainability Assessment of Food Redistribution Initiatives in Sweden
- 2020
-
Ingår i: Resources. - : MDPI AG. - 2079-9276. ; 9
-
Tidskriftsartikel (refereegranskat)abstract
- Food banks that redistribute surplus food from retailers and the food industry to people in need are not a new concept globally, but their connection to food waste prevention is new. As a result, new types of food redistribution units are emerging and diversifying to find new target groups and distribution methods. The aim of this study was to identify and study surplus food redistribution units in Sweden,and then to assess the impact on several sustainability indicators for selected redistribution units, in order to increase knowledge on the types of values these redistribution concepts generate. The methods used for analyzing the scenarios were Environmental Life Cycle Assessment, Life Cycle Costing and Social Life Cycle Assessment. The results showed that providing food bags to socially exposed people generated the largest reduction of greenhouse gas emissions per kg of redistributed food (−1.2 kg CO2eq./FU). Reprocessing surplus food to a high-quality end-product was attributed a high social value, due to job creation effects in the high number of working hours required per kg of redistributed food. With regard to economic impacts, all but two scenarios studied had monthly financial losses,and therefore needed other sources of financial support.
|
|
| 4. |
- Bett, Cheruioyt Rawlynce, et al.
(författare)
-
Cattle Breeds: Extinction or Quasi-Extant?
- 2013
-
Ingår i: Resources. - : MDPI AG. - 2079-9276. ; 2, s. 335-357
-
Tidskriftsartikel (refereegranskat)abstract
- Abstract: Uniquely selected breeds bred over thousands of years of domestication in a wide range of environments have been declared extinct over the last century. Still more breeds are at risk of becoming extinct and the rate continues to accelerate. Assessing the current status and possible future dynamics of livestock breeds is therefore a critical step in the management of Animal Genetic Resources (AnGR). This study applies a qualitative approach to comprehensively analyze cattle genetic resources in selected countries in order to better understand the risk status of cattle breeds and those that need to be considered extinct and/or quasi-extant. The status of each breed, i.e., not at risk, critical, endangered and extinct, was verified using information available at the Domestic Animal Diversity Information System (DAD-IS) web site, as well as cattle statistics (where available) and a breed survey. In most examples, breeds listed as extinct have played important roles in the development of new breeds, and should not be classified as extinct, unless proven otherwise, given that even breeds existing in vivo are developing. Therefore, a new risk status quasi-extant for this category of cattle breeds is suggested. In addition, based on the findings of this study, the concept of breed needs to be questioned as relates to it being a good measure of genetic diversity. Further investigations of the situation of cattle breeds (and other livestock species) in more countries/continents using similar categories are deemed necessary.
|
|
| 5. |
- Drielsma, Johannes A., et al.
(författare)
-
Abiotic raw-materials in life cycle impact assessments: An emerging consensus across disciplines
- 2016
-
Ingår i: Resources. - : MDPI. - 2079-9276. ; 5:1
-
Tidskriftsartikel (refereegranskat)abstract
- This paper captures some of the emerging consensus points that came out of the workshop "Mineral Resources in Life Cycle Impact Assessment: Mapping the path forward", held at the Natural History Museum London on 14 October 2015: that current practices rely in many instances on obsolete data, often confuse resource depletion with impacts on resource availability, which can therefore provide inconsistent decision support and lead to misguided claims about environmental performance. Participants agreed it would be helpful to clarify which models estimate depletion and which estimate availability, so that results can be correctly reported in the most appropriate framework. Most participants suggested that resource availability will be more meaningfully addressed within a comprehensive Life Cycle Sustainability Assessment framework rather than limited to an environmental Life Cycle Assessment or Footprint. Presentations from each of the authors are available for download [1].
|
|
| 6. |
- Eller, Franziska, et al.
(författare)
-
Biomethane yield from different European Phragmites australis genotypes, compared with other herbaceous wetland species grown at different fertilization regimes
- 2020
-
Ingår i: Resources. - Basel : MDPI. - 2079-9276. ; 9:5
-
Tidskriftsartikel (refereegranskat)abstract
- Phragmites australis, Typha latifolia, T. angustifolia and Arundo donax are tall wetland graminoids with the potential to replace fossil fuels under sustainable cultivation conditions. We investigated the biomethane (CH4) production of these four species, including four different genotypes of P. australis, which represent the high intraspecific diversity of European reed. All plants were grown under three different macronutrient supplies (no nutrients added, an equivalent of 75 kg N ha−1 year−1 added and an equivalent of 500 kg N ha−1 year−1 added). Biomethane production was measured in four independent batch digestion tests. Across all experiments, fertilization regime had little effect on CH4 yield, which was on average 222 ± 31 L kg−1 volatile solids (VS). The lowest yield was produced by T. angustifolia (140 L kgVS−1) receiving no nutrients, while the highest yield was produced by A. donax (305 L kgVS−1) in the highest nutrient treatment. The intraspecific diversity of P. australis did not affect biomethane production. All P. australis genotypes produced on average 226 ± 19 L CH4 kgVS−1, which, although high, was still lower than conventional biogas species. The biomass production of P. australis was less increased by fertilization than that of Typha sp. and A. donax, but all species had similar biomass without fertilization.
|
|
| 7. |
- Finnveden, Göran, et al.
(författare)
-
Exergy as a Measure of Resource Use in Life Cycle Assessment and Other Sustainability Assessment Tools
- 2016
-
Ingår i: Resources. - : MDPI AG. - 2079-9276. ; 5:3
-
Tidskriftsartikel (refereegranskat)abstract
- A thermodynamic approach based on exergy use has been suggested as a measure for the use of resources in Life Cycle Assessment and other sustainability assessment methods. It is a relevant approach since it can capture energy resources, as well as metal ores and other materials that have a chemical exergy expressed in the same units. The aim of this paper is to illustrate the use of the thermodynamic approach in case studies and to compare the results with other approaches, and thus contribute to the discussion of how to measure resource use. The two case studies are the recycling of ferrous waste and the production and use of a laptop. The results show that the different methods produce strikingly different results when applied to case studies, which indicates the need to further discuss methods for assessing resource use. The study also demonstrates the feasibility of the thermodynamic approach. It identifies the importance of both energy resources, as well as metals. We argue that the thermodynamic approach is developed from a solid scientific basis and produces results that are relevant for decision-making. The exergy approach captures most resources that are considered important by other methods. Furthermore, the composition of the ores is shown to have an influence on the results. The thermodynamic approach could also be further developed for assessing a broader range of biotic and abiotic resources, including land and water.
|
|
| 8. |
- Gałaś, Andrzej, et al.
(författare)
-
Impact of Covid-19 on the Mining Sector and Raw Materials Security in Selected European Countries
- 2021
-
Ingår i: Resources. - : MDPI. - 2079-9276. ; 10:5
-
Tidskriftsartikel (refereegranskat)abstract
- Events that change the global economy rapidly, without warning, in principle strongly affect mining, which is one of the pillars of global development. After the first months of the Covid-19 pandemic, the mining pillar seems to be relatively stable. In this study, thanks to the meeting of an international team, it was possible to collect and compare a set of data on the impact on mining. In contrast to the general assessments of the stability of the mining sector, the authors decided to assess the impact of Covid-19 at individual stages of the mining project life cycle. In this way, it was possible to identify the most impacted fragments of the mining pillar. It was assessed that the highest influence of Covid-19 is observed in projects implementing feasibility studies and in projects for the development of new mines. The same is true of extracting residual resources in mines prior to the closure decision. The medium impact was confirmed at the exploration and discovery stage. The authors conclude that the impact on the current mining production is smaller and the effects in this case are short term, which is mainly due to a continued strong demand for minerals in China, which has balanced the weaker demand in other parts of the world. On the other hand, stopping the exploration and development of new mines will have a long-term impact, including an increased possibility of disruption of the future security of supplies of raw materials.
|
|
| 9. |
- Gauffin, Alicia, et al.
(författare)
-
The Global Societal Steel Scrap Reserves and Amounts of Losses
- 2016
-
Ingår i: Resources. - : MDPI AG. - 2079-9276. ; 5:3
-
Tidskriftsartikel (refereegranskat)abstract
- In this study a newly developed method called the Progressing and Backcasting models were used to evaluate the annual resource utilizations of steel scrap in Sweden and globally. The model results show that it is possible to assess the amounts of steel scrap available for steelmaking at a given point in time, based on statistical dynamic material flow models. By a better mapping of the available amounts of steel scrap reserves on a country basis, it is possible to ease the trade of scrap across country boarders. This in turn can optimize the supply of recyclable metals as a raw material used in the industry. The results for Swedish steel consumption show that export bans used to secure the domestic market of steel scrap do damage the internal market due to increased amounts of losses. This suggests that export bans should be lifted to optimize recycling in countries. The model results also show that the global losses of steel are higher than for an industrialized country such as Sweden. Furthermore, the results show that the Backcasting and Progressing models can be used to calculate robust forecasts on the long term availability of steel scrap assets. This information could be used for future structural plans of scrap consuming steelmaking mills and waste management facilities. Hence, it is possible to contribute to a sustainable industrial development and a circular economy.
|
|
| 10. |
- Ghosh, Ruchira, et al.
(författare)
-
Urban water security assessment using an integrated metabolism approach – case study of the National Capital Territory of Delhi in India
- 2019
-
Ingår i: Resources. - Switzerland : MDPI. - 2079-9276. ; 8:2, s. 1-15
-
Tidskriftsartikel (refereegranskat)abstract
- Water is a non substitutable resource and a social good, which governments must perforce provide to its citizens in the right quantity and quality. An integrated urban metabolism model is useful in understanding the status quo of an urban water and sanitation system. By defining and measuring the values of relevant hydrological performance indicators-deliverables of the model referred to-a thorough knowledge of the present performance and the gaps, which need to be plugged en route to a sustainable urban water infrastructure, can be obtained, as demonstrated in this paper. This then forms the bedrock for decision-making and policy formulation for change to be introduced top-down as well as advice, which would enable the much needed bottom-up support to policies. The authors have chosen Delhi as the case study city, but would like to point out that this application can be reproduced for any other town/city/region of the world. The water balance within the chosen system boundaries shows that the annual unutilized flows, amounting to 1443 million cubic meters, dominate the metabolic flows of water in Delhi, and the annual groundwater withdrawal, which exceeds 420 million cubic meters, is much greater than the recharge rate, resulting in a rapid depletion of the groundwater level. There is an urgent need thereby to improve the rate of infiltration of stormwater and reduce the rate of runoff by focusing on increasing the share of permeable surfaces in the city, as well as to consider the wastewater streams as potential sources of water, while not forgetting demand side of management measures, as the pressure on the urban water system in the city is likely to intensify with a combination of population growth, economic development, and climate change in the near future. The recommendations provided by the authors towards the end of the article, can, if suitable measures are undertaken and robust policies are implemented, result in Delhi's enjoying a water surplus in the short term, and progressively attain complete sustainability with regard to the utilization of its water resources.
|
|
