| 1. |
- De Jong, R. S., et al.
(författare)
-
4MOST - 4-metre multi-object spectroscopic telescope
- 2012
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - : SPIE. - 9780819491473 ; , s. 84460T-
-
Konferensbidrag (refereegranskat)abstract
- The 4MOST consortium is currently halfway through a Conceptual Design study for ESO with the aim to develop a wide-field (>3 square degree, goal >5 square degree), high-multiplex (>1500 fibres, goal 3000 fibres) spectroscopic survey facility for an ESO 4m-class telescope (VISTA). 4MOST will run permanently on the telescope to perform a 5 year public survey yielding more than 20 million spectra at resolution R∼5000 (λ=390-1000 nm) and more than 2 million spectra at R∼20,000 (395-456.5 nm & 587-673 nm). The 4MOST design is especially intended to complement three key all-sky, space-based observatories of prime European interest: Gaia, eROSITA and Euclid. Initial design and performance estimates for the wide-field corrector concepts are presented. Two fibre positioner concepts are being considered for 4MOST. The first one is a Phi-Theta system similar to ones used on existing and planned facilities. The second one is a new R-Theta concept with large patrol area. Both positioner concepts effectively address the issues of fibre focus and pupil pointing. The 4MOST spectrographs are fixed configuration two-arm spectrographs, with dedicated spectrographs for the high- and low-resolution fibres. A full facility simulator is being developed to guide trade-off decisions regarding the optimal field-of-view, number of fibres needed, and the relative fraction of high-to-low resolution fibres. The simulator takes mock catalogues with template spectra from Design Reference Surveys as starting point, calculates the output spectra based on a throughput simulator, assigns targets to fibres based on the capabilities of the fibre positioner designs, and calculates the required survey time by tiling the fields on the sky. The 4MOST consortium aims to deliver the full 4MOST facility by the end of 2018 and start delivering high-level data products for both consortium and ESO community targets a year later with yearly increments.
|
|
| 2. |
- Delacroix, C., et al.
(författare)
-
A diamond AGPM coronagraph for VISIR
- 2012
-
Ingår i: Proceedings of SPIE. - : SPIE. - 9780819491473 ; , s. 84468K-
-
Konferensbidrag (refereegranskat)abstract
- In recent years, phase mask coronagraphy has become increasingly efficient in imaging the close environment of stars, enabling the search for exoplanets and circumstellar disks. Coronagraphs are ideally suited instruments, characterized by high dynamic range imaging capabilities, while preserving a small inner working angle. The AGPM (Annular Groove Phase Mask, Mawet et al. 20051) consists of a vector vortex induced by a rotationally symmetric subwavelength grating. This technique constitutes an almost unique solution to the achromatization at longer wavelengths (mid-infrared). For this reason, we have specially conceived a mid-infrared AGPM coronagraph for the forthcoming upgrade of VISIR, the mid-IR imager and spectrograph on the VLT at ESO (Paranal), in collaboration with members of the VISIR consortium. The implementation phase of the VISIR Upgrade Project is foreseen for May-August 2012, and the AGPM installed will cover the 11-13.2 μm spectral range. In this paper, we present the entire fabrication process of our AGPM imprinted on a diamond substrate. Diamond is an ideal material for mid-infrared wavelengths owing to its high transparency, small dispersion, extremely low thermal expansion and outstanding mechanical and chemical properties. The design process has been performed with an algorithm based on the rigorous coupled wave analysis (RCWA), and the micro-fabrication has been carried out using nano-imprint lithography and reactive ion etching. A precise grating profile metrology has also been conducted using cleaving techniques. Finally, we show the deposit of fiducials (i.e. centering marks) with Aerosol Jet Printing (AJP). We conclude with the ultimate coronagraph expected performances.
|
|
| 3. |
- Oliva, E., et al.
(författare)
-
Upgrading CRIRES-VLT to cross-dispersed mode
- 2012
-
Ingår i: Proceedings of SPIE. - : SPIE. - 9780819491473
-
Konferensbidrag (refereegranskat)abstract
- The cryogenic high resolution IR echelle spectrograph CRIRES is the ESO infrared (0.95-5.4 μm) high resolution spectrograph operating at the Nasmyth A focus of VLT-UT1. The instrument provides long-slit (31″) spectroscopy with resolving power up to R=100,000 over a quite narrow wavelengths range, about 1/70 of the central wavelength. Observations of compact objects (e.g. stellar photospheres) could be made much more efficient by implementing a cross-dispersed mode, which increases the simultaneous spectral coverage by an order of magnitude or more. This paper presents the design of a relatively simple system to add cross-dispersed modes to CRIRES with a minimum impact on the instrument optics and mechanics.
|
|
