| 1. |
|
|
| 2. |
- Al-Dmour, E., et al.
(författare)
-
The vacuum system of MAX IV storage rings : Installation and conditioning
- 2017
-
Ingår i: IPAC 2017 - Proceedings of the 8th International Particle Accelerator Conference. - 9783954501823 ; , s. 3468-3470
-
Konferensbidrag (refereegranskat)abstract
- The installation of the vacuum system of the 3 GeV storage ring was started in November 2014 and finished in May 2015. In August 2015 the commissioning of the storage ring started, the first stored beam has been achieved on the 15th of September 2015. The installation of the vacuum system of the 1.5 GeV storage ring was done from September 2015 and the main part finished in December 2015, the connection to the Linac with the transfer line has been done in August 2016. In September 2016 the commissioning of the 1.5 GeV storage ring started with the first stored beam achieved on the 30th of September 2016. The vacuum system conditioning for the two rings was successful; the average dynamic pressure reduction and the increase in the lifetime with the accumulated beam dose is a demonstration of the good performance of the vacuum system. The installation procedure and the results of the conditioning together with the latest developments are introduced here.
|
|
| 3. |
- Andersen, J., et al.
(författare)
-
The soft X-ray laser project at MAX IV
- 2017
-
Ingår i: IPAC 2017 - Proceedings of the 8th International Particle Accelerator Conference. - : Joint Accelerator Conferences Website - JACoW. - 9783954501823 ; , s. 2760-2762
-
Konferensbidrag (refereegranskat)abstract
- A Soft X-ray Laser (SXL) beamline utilising FEL technology is being designed for the Short Pulse Facility (SPF) at the MAX IV Laboratory. A conceptual design study has been started following on the scientific case already prepared in collaboration between several Swedish Universities and driven by a strong (Swedish) user demand. The baseline goal of the SXL beamline is to generate intense and short pulses in the range 1-5 nm (0.2-1 keV). The system is building on the MAX IV linac system, already today providing 100 fs 3 GeV and pulses compressed to 100 fs for other applications within the SPF. As a special feature we foresee a variety of pump-probe capabilities.
|
|
| 4. |
- Andersson, J, et al.
(författare)
-
Emittance improvements in the MAX IV photocathode injector
- 2017
-
Ingår i: IPAC 2017 - Proceedings of the 8th International Particle Accelerator Conference. - 9783954501823 - 9783954501823 ; , s. 1533-1536
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- The MAX IV injector design predicts a beam with 100 pC of charge and an emittance lower than 1 mm mrad. The photocathode pre-injector is based on the now close to standard 1.6-cell gun adapted to 2.9985 GHz, in combination with a Ti:Sapphire laser system. This system reaches the requirements of the injector operation for the SPF, but can be tuned beyond specifications to open up new operation modes. During 2016 and 2017 several aspects where investigated to improve the emittance from the current gun, the goal was to meet the SPF specifications. In this paper we report on the progress, discuss the steps taken leading to a final emittance of 1 mm mrad and beyond.
|
|
| 5. |
- Andersson, J, et al.
(författare)
-
The New MAX IV Gun Test Stand
- 2017
-
Ingår i: IPAC 2017 - Proceedings of the 8th International Particle Accelerator Conference. - 9783954501823 - 9783954501823 ; , s. 1537-1540
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- The gun test stand from MAX-Lab has been upgraded and moved to a new facility at the MAX IV Laboratory. The new test stand will reuse parts of the equipment from the old test stand but a number of improvements to the setup are be made. In this paper we report on the design of the new gun test stand, research plans in the near future as well as planned and possible future research topics..
|
|
| 6. |
- Bhattacharyya, Anirban, et al.
(författare)
-
Wave propagation in a fractal wave guide
- 2017
-
Ingår i: in Proceedings of the 8th International Particle Accelerator Conference (IPAC 2017), Copenhagen, Denmark, May, 2017.. - 9783954501823
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)
|
|
| 7. |
- Björklund Svensson, Jonas, et al.
(författare)
-
Driver-witness-bunches for plasma-wakefield acceleration at the MAX IV Linear Accelerator
- 2017
-
Ingår i: IPAC 2017 - Proceedings of the 8th International Particle Accelerator Conference. - 9783954501823 ; , s. 1743-1746
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Beam-driven plasma-wakefield acceleration is an acceleration scheme promising accelerating fields of at least two to three orders of magnitude higher than in conventional radiofrequency accelerating structures. The scheme relies on using a charged particle bunch (driver) to drive a non-linear plasma wake, into which a second bunch (witness) can be injected at an appropriate distance behind the first, yielding a substantial energy gain of the witness bunch particles. This puts very special demands on the machine providing the particle beam. In this article, we use simulations to show that, if driver-witness-bunches can be generated in the photocathode electron gun, the MAX IV Linear Accelerator could be used for plasma-wakefield acceleration.
|
|
| 8. |
- Bosland, P., et al.
(författare)
-
Status of the ESS elliptical cryomodules at CEA saclay
- 2017
-
Ingår i: IPAC 2017 - Proceedings of the 8th International Particle Accelerator Conference. - 9783954501823 ; , s. 945-947
-
Konferensbidrag (refereegranskat)abstract
- The first ESS prototype cryomodule with medium beta cavities named M-ECCTD is being assembled at CEA Saclay. The Q curves of the 4 cavities mounted inside the cryomodule are presented, and the four power couplers have been conditioned at high power before their assembly onto the cavity string. Completion of the M-ECCTD assembly outside clean room is in progress as well as the finalization of the RF power test stand preparation. RF power tests of the M-ECCTD will be performed during summer 2017. CEA is preparing the production of the ESS medium and high beta cryomodules of the series before the test of the M-ECCTD and the contracts for the procurement of the most critical components have already been signed.
|
|
| 9. |
- Cenni, Enrico, et al.
(författare)
-
Vertical test results on ESS medium and high beta elliptical cavity prototypes equipped with helium tank
- 2017
-
Ingår i: IPAC 2017 - Proceedings of the 8th International Particle Accelerator Conference. - 9783954501823 ; , s. 948-950
-
Konferensbidrag (refereegranskat)abstract
- The ESS elliptical superconducting Linac consists of two types of 704.42 MHz cavities, medium and high beta, to accelerate the beam from 216 MeV (spoke cavity Linac) up to the final energy at 2 GeV. The last Linac optimization, called Optimus+[1], has been carried out taking into account the limitations of SRF cavity performance (field emission). The medium and high-beta parts of the Linac are composed of 36 and 84 elliptical cavities, with geometrical beta values of 0.67 and 0.86 respectively [2]. This work presents the latest vertical test results on ESS medium and high beta elliptical cavity prototypes equipped with helium tank. We describe the cavity preparation procedure from buffer chemical polishing to vertical test.
|
|
| 10. |
- Danared, Håkan, et al.
(författare)
-
Preface
- 2017
-
Ingår i: IPAC 2018 : Proceedings of the 8th International Particle Accelerator Conference - Proceedings of the 8th International Particle Accelerator Conference. - 9783954501823
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)
|
|
