| 1. |
- Hosseinpourpia, Reza, 1983-, et al.
(författare)
-
Effect of Bio-Based Additives on Physico-Mechanical Properties of Medium Density Fibreboards
- 2017
-
Ingår i: 28th ICWST, International Conference on Wood Science and Technology. - Zagreb : University of Zagreb, Faculty of Forestry. - 9789532920536 ; , s. 153-158
-
Konferensbidrag (refereegranskat)abstract
- Dimensional stability of wood-based panels is generally improved with application of suitable additives. Most of these additives, such as paraffin wax, are petroleum-based and with relatively high cost, and therefore, it is desirable to develop low-cost and effective substitutes from renewable resources. This work studied the potential of using a renewable water-repellent additive, such as tall oil fatty acid, for lab-scale manufacturing of medium density fibreboards (MDF). Tall oil fatty acid (TOFA) was used at 1 and 3% w/w of urea formaldehyde (UF) resin. MDF panels with similar concentrations of paraffin wax (wax) and panels without adding a water-repellent agent were served as controls. It was assessed the dimensional stability of the panels in terms of thickness swelling and water uptake after 4 and 24h immersion in water, and their mechanical performance in terms of modulus of elasticity, modulus of rupture and internal bonding. Results showed no obvious differences in the strength behaviour of the panels by addition of water-repellent agents. Dimensional stability, however, considerably improved by addition of TOFA, but it was still inferior when compared to that provided by wax.
|
|
