1. |
- Almeida, Diogo, 1991-, et al.
(författare)
-
Team KTH’s Picking Solution for the Amazon Picking Challenge 2016
- 2017
-
Ingår i: Warehouse Picking Automation Workshop 2017.
-
Konferensbidrag (populärvet., debatt m.m.)abstract
- In this work we summarize the solution developed by Team KTH for the Amazon Picking Challenge 2016 in Leipzig, Germany. The competition simulated a warehouse automation scenario and it was divided in two tasks: a picking task where a robot picks items from a shelf and places them in a tote and a stowing task which is the inverse task where the robot picks items from a tote and places them in a shelf. We describe our approach to the problem starting from a high level overview of our system and later delving into details of our perception pipeline and our strategy for manipulation and grasping. The solution was implemented using a Baxter robot equipped with additional sensors.
|
|
2. |
- Almeida, Diogo, 1991-, et al.
(författare)
-
Team KTH’s Picking Solution for the Amazon Picking Challenge 2016
- 2020
-
Ingår i: Advances on Robotic Item Picking: Applications in Warehousing and E-Commerce Fulfillment. - Cham : Springer Nature. ; , s. 53-62
-
Bokkapitel (övrigt vetenskapligt/konstnärligt)abstract
- In this chapter we summarize the solution developed by team KTH for the Amazon Picking Challenge 2016 in Leipzig, Germany. The competition, which simulated a warehouse automation scenario, was divided into two parts: a picking task, where the robot picks items from a shelf and places them into a tote, and a stowing task, where the robot picks items from a tote and places them in a shelf. We describe our approach to the problem starting with a high-level overview of the system, delving later into the details of our perception pipeline and strategy for manipulation and grasping. The hardware platform used in our solution consists of a Baxter robot equipped with multiple vision sensors.
|
|
3. |
- Andersson, Klas, 1968-
(författare)
-
Improving Fixed Wing UAV Endurance, by Cooperative Autonomous Soaring
- 2021
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The ever-expanding use and development of smaller UAVs (Unmanned Aerial Vehicles) has highlighted an increasing demand for extended range and endurance for this type of vehicles. In this thesis, the development of a concept and system for autonomous soaring of cooperating unmanned aerial vehicles is presented. The purpose of the developed system is to extend endurance by harvesting energy available in the atmosphere in the form of thermal updrafts, in a similar way that some birds and manned gliders do. By using this “free” energy, considerable improvements in maximum achievable endurance can be realized under a wide variety of atmospherical and weather conditions. The work included theoretical analysis, simulations, and finally flight test- ing of the soaring controller and the system. The system was initially devel- oped as a single-vehicle concept and thereafter extended into a system consist- ing of two cooperating gliders. The purpose of the extension to cooperation, was to further improve the performance of the system by increasing the ability to locate the rising air of thermal updrafts. The theoretical analysis proved the soaring algorithm’s thermal centering controller to be stable. The trials showed the concept of autonomous soaring to function as expected from the simulations. Further it revealed that, by applying the idea, extensive performance gains can be achieved under a fairly wide variety of conditions. The cooperative soaring, likewise, functioned as anticipated and the glid- ers found, cooperated, and climbed together in updrafts. This represents the first and presumably only time cooperative autonomous soaring in this way, has been successfully demonstrated in flight. To draw further conclusions on the advantages of cooperative soaring additional flight trials would, however, be beneficial. Possible issues and limitations were highlighted during the trials and a number of potential improvements were identified. As a part of the work, trials were conducted to verify the viability to implement the system into “real world” operational scenarios. As a proof of concept this was done by tasking the autonomous gliders to perform data/communications relay missions for other UAV systems sending imagery to the ground-station from beyond line of sight (BLOS). The outcome of the trials was positive and the concept appeared to be well suited for these types of missions. The comms relay system was further developed into a hybrid system where the optimal location concerning relay performance was autonomously sought out, after-which the attentiveness then switched to autonomous thermal soaring in the vicinity of this ideal relay position. The hybrid system was tested in simulation and partially flight tested.
|
|
4. |
- Anisi, David A., 1977-, et al.
(författare)
-
Communication constrained multi-UGV surveillance
- 2008
-
Ingår i: IFAC World Congress. - Seoul, Korea.
-
Konferensbidrag (refereegranskat)abstract
- This paper addresses the problem of connectivity constrained surveillance of a given polyhedral area with obstacles using a group of Unmanned Ground Vehicles (UGVs). The considered communication restrictions may involve both line-of-sight constraints and limited sensor range constraints. In this paper, the focus is on dynamic information graphs, G, which are required to be kept recurrently connected. The main motivation for introducing this weaker notion of connectivity is security and surveillance applications where the sentry vehicles may have to split temporary in order to complete the given mission efficiently but are required to establish contact recurrently in order to exchange information or to make sure that all units are intact and well-functioning. From a theoretical standpoint, recurrent connectivity is shown to be sufficient for exponential convergence of consensus filters for the collected sensor data.
|
|
5. |
- Anisi, David A., et al.
(författare)
-
Cooperative Minimum Time Surveillance With Multiple Ground Vehicles
- 2010
-
Ingår i: IEEE Transactions on Automatic Control. - 0018-9286 .- 1558-2523. ; 55:12, s. 2679-2691
-
Tidskriftsartikel (refereegranskat)abstract
- In this paper, we formulate and solve two different minimum time problems related to unmanned ground vehicle (UGV) surveillance. The first problem is the following. Given a set of surveillance UGVs and a polyhedral area, find waypoint-paths for all UGVs such that every point of the area is visible from a point on a path and such that the time for executing the search in parallel is minimized. Here, the sensors' field of view are assumed to have a limited coverage range and be occluded by the obstacles. The second problem extends the first by additionally requiring the induced information graph to be connected at the time instants when the UGVs perform the surveillance mission, i.e., when they gather and transmit sensor data. In the context of the second problem, we also introduce and utilize the notion of recurrent connectivity, which is a significantly more flexible connectivity constraint than, e.g., the 1-hop connectivity constraints and use it to discuss consensus filter convergence for the group of UGVs.
|
|
6. |
- Anisi, David A., 1977-, et al.
(författare)
-
Minimum time multi-UGV surveillance
- 2008
-
Ingår i: OPTIMIZATION AND COOPERATIVE CONTROL STRATEGIES. - Berlin : Springer Verlag. - 9783540880622 ; , s. 31-45
-
Konferensbidrag (refereegranskat)abstract
- This paper addresses the problem of concurrent task- and path planning for a number of surveillance Unmanned Ground Vehicles (UGVs) such that a user defined area of interest is covered by the UGVs' sensors in minimum time. We first formulate the problem, and show that it is in fact a generalization of the Multiple Traveling Salesmen Problem (MTSP), which is known to be NP-hard. We then propose a solution that decomposes the problem into three subproblems. The first is to find a maximal convex covering of the search area. Most results on static coverage use disjoint partitions of the search area, e.g. triangulation, to convert the continuous sensor positioning problem into a discrete one. However, by a simple example, we show that a highly overlapping set of maximal convex sets is better suited for minimum time coverage. The second subproblem is a combinatorial assignment and ordering of the sets in the cover. Since Tabu search algorithms are known to perform well on various routing problems, we use it as a part of our proposed solution. Finally, the third subproblem utilizes a particular shortest path sub-routine in order to find the vehicle paths, and calculate the overall objective function used in the Tabu search. The proposed algorithm is illustrated by a number of simulation examples.
|
|
7. |
- Anisi, David, et al.
(författare)
-
Online Trajectory Planning for Aerial Vehicle : A Safe Approach with Guaranteed Task Completion
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- On-line trajectory optimization in three dimensional space is the main topic of the paper at hand. The high-level framework augments on-line receding horizon control with an off-line computed terminal cost that captures the global characteristics of the environment, as well as any possible mission objectives. The first part of the paper is devoted to the single vehicle case while the second part considers the problem of simultaneous arrival of multiple aerial vehicles. The main contribution of the first part is two-fold. Firstly, by augmenting a so called safety maneuver at the end of the planned trajectory, this paper extends previous results by addressing provable safety properties in a 3D setting. Secondly, assuming initial feasibility, the planning method presented is shown to have finite time task completion. Moreover, a quantitative comparison between the two competing objectives of optimality and computational tractability is made. Finally, some other key characteristics of the trajectory planner, such as ability to minimize threat exposure and robustness, are highlighted through simulations. As for the simultaneous arrival problem considered in the second part, by using a time-scale separation principle, we are able to adopt standard Laplacian control to a consensus problem which is neither unconstrained, nor first order.
|
|
8. |
- Bhat, Sriharsha, 1991-, et al.
(författare)
-
A Cyber-Physical System for Hydrobatic AUVs : System Integration and Field Demonstration
- 2020
-
Ingår i: 2020 IEEE/OES Autonomous Underwater Vehicles Symposium, AUV 2020. - : Institute of Electrical and Electronics Engineers (IEEE).
-
Konferensbidrag (refereegranskat)abstract
- Cyber-physical systems (CPSs) comprise a network of sensors and actuators that are integrated with a computing and communication core. Hydrobatic Autonomous Underwater Vehicles (AUVs) can be efficient and agile, offering new use cases in ocean production, environmental sensing and security. In this paper, a CPS concept for hydrobatic AUVs is validated in real-world field trials with the hydrobatic AUV SAM developed at the Swedish Maritime Robotics Center (SMaRC). We present system integration of hardware systems, software subsystems for mission planning using Neptus, mission execution using behavior trees, flight and trim control, navigation and dead reckoning. Together with the software systems, we show simulation environments in Simulink and Stonefish for virtual validation of the entire CPS. Extensive field validation of the different components of the CPS has been performed. Results of a field demonstration scenario involving the search and inspection of a submerged Mini Cooper using payload cameras on SAM in the Baltic Sea are presented. The full system including the mission planning interface, behavior tree, controllers, dead-reckoning and object detection algorithm is validated. The submerged target is successfully detected both in simulation and reality, and simulation tools show tight integration with target hardware.
|
|
9. |
- Bhat, Sriharsha, et al.
(författare)
-
A Cyber-Physical System for Hydrobatic AUVs: System Integration and Field Demonstration
- 2020
-
Konferensbidrag (refereegranskat)abstract
- Cyber-physical systems (CPSs) comprise a network of sensors and actuators that are integrated with a computing and communication core. Hydrobatic Autonomous Underwater Vehicles (AUVs) can be efficient and agile, offering new use cases in ocean production, environmental sensing and security. In this paper, a CPS concept for hydrobatic AUVs is validated in real-world field trials with the hydrobatic AUV SAM developed at the Swedish Maritime Robotics Center (SMaRC). We present system integration of hardware systems, software subsystems for mission planning using Neptus, mission execution using behavior trees, flight and trim control, navigation and dead reckoning. Together with the software systems, we show simulation environments in Simulink and Stonefish for virtual validation of the entire CPS. Extensive field validation of the different components of the CPS has been performed. Results of a field demonstration scenario involving the search and inspection of a submerged Mini Cooper using payload cameras on SAM in the Baltic Sea are presented. The full system including the mission planning interface, behavior tree, controllers, dead-reckoning and object detection algorithm is validated. The submerged target is successfully detected both in simulation and reality, and simulation tools show tight integration with target hardware.
|
|
10. |
- Båberg, Fredrik, et al.
(författare)
-
Extended version of Adaptive Object Centered Teleoperation Control of a Mobile Manipulator
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- Teleoperation of a mobile robot manipulating and exploring an object shares many similarities with the manipulation of virtual objects in a 3D design software such as AutoCAD. The user interfaces are however quite different, mainly for historical reasons. In this paper we aim to change that, and draw inspiration from the 3D design community to propose a teleoperation interface control mode that is identical to the ones being used to locally navigate the virtual viewpoint of most Computer Aided Design (CAD)softwares.The proposed mobile manipulator control framework thus allows the user to focus on the 3D objects being manipulated, using control modes such as orbit object and pan object. The gripper of the robot performs the desired motions relative to the object, while the manipulator arm and base moves in a way that realizes the desired gripper motions. The system redundancies are exploited in order to take additional constraints, such as obstacle avoidance, into account, using a constraint based programming framework.
|
|