| 1. |
|
|
| 2. |
- Andersen, A., et al.
(författare)
-
Oscillating Bubble SHG on Surface Elastic and Surface Viscoelastic Systems : New Insights in the Dynamics of Adsorption Layers
- 2006
-
Ingår i: Journal of Physical Chemistry B. - : American Chemical Society (ACS). - 1520-6106 .- 1520-5207. ; 110:37, s. 18466-18472
-
Tidskriftsartikel (refereegranskat)abstract
- Surface rheology governs a great variety of interfacial phenomena such as foams or emulsions and plays a dominant role in several technological processes such as high-speed coating. Its major difference with bulk rheology resides in the high compressibility of the surface phase, which is the direct consequence of the molecular exchange between adsorbed and dissolved species. In analogy to bulk rheology, a complex surface dilational modulus, ε, which captures surface tension changes upon defined area changes of the surface layer, can be defined. The module ε is complex, and the molecular interpretation of the dissipative process that gives rise to the imaginary part of the module is subject to some controversy. In this contribution, we used the oscillating bubble technique to study the surface dilational modulus in the mid-frequency range. The dynamic state of the surface layer was monitored by a pressure sensor and by surface second-harmonic generation (SHG). The pressure sensor measures the real and imaginary part of the modulus while SHG monitors independently the surface composition under dynamic conditions. The experiment allows the assessment of the contribution of the compositional term to the surface dilational modulus ε. Two aqueous surfactant solutions have been characterized: a surface elastic and a surface viscoelastic solution. The elastic surface layer can be described within the framework of the extended Lucassen−van den Tempel Hansen model. The change in surface concentration is in phase with the relative area change of the surface layer, which is in strong contrast with the results obtained from the surface viscoelastic solution. Here, surface tension, area change, and surface composition are phase-shifted, providing evidence for a nonequilibrium state within the surface phase. The data are used to assess existing surface rheology models.
|
|
| 3. |
- Andersson, Henrik, et al.
(författare)
-
Evaluation of coatings applied to flexible substrates to enhance quality of ink jet printed silver nano-particle structures
- 2012
-
Ingår i: IEEE Transactions on Components, Packaging, and Manufacturing Technology, Part C. - 1083-4400 .- 1558-1241. ; 2:2, s. 342-348
-
Tidskriftsartikel (refereegranskat)abstract
- Different types of the commercial surface treatment InkAid have been evaluated as a surface treatment to enhance print quality of silver nano-particle ink structures printed on polyimide and polyethene substrate. Originally these coatings have been specified to be applied on substrates for graphical ink jet printing. On the coated polyimide and polyethene substrates lines of different widths have been printed using a Dimatix materials printer together with silver nano-particle ink manufactured by Advanced Nano Products. The prints have then been evaluated in terms of print quality and resistivity before and after sintering. The results show that the application of these coatings can improve the print quality considerably, making it possible to print lines with a good definition, which is not otherwise possible with this type of ink on this substrate types. It has been found that the coating Semi Gloss provides the best results, both in terms of print quality as well as the lowest resistivity. The resistivity on polyethene is 3.5*10-7Ωm at best when sintered at 150°C and for polyimide 8.9*10-8Ωm sintered at 200°C. This corresponds to a conductivity of about 4.5% and 18%of bulk silver, respectively. It can be concluded that applying such PVP based coatings to polyethene and polyimide will increase the print quality quite substantially, making it possible to print patterns with requirements of smaller line widths and more details than what is possible without coating.
|
|
| 4. |
|
|
| 5. |
- Andersson, Henrik, et al.
(författare)
-
The influence of paper coating content on room temperature sintering of silver nanoparticle ink
- 2013
-
Ingår i: Nanotechnology. - : IOP Publishing. - 0957-4484 .- 1361-6528. ; 24:45, s. Art. no. 455203-
-
Tidskriftsartikel (refereegranskat)abstract
- The resistance of inkjet printed lines using a silver nanoparticle based ink can be very dependent on the substrate. A very large difference in resistivity was observed for tracks printed on paper substrates with aluminum oxide based coatings compared to silica based coatings. Silica based coatings are often cationized with polymers using chloride as a counter ion. It is suggested that the precipitation of silver salts is the cause of the high resistivity, since papers pretreated with salt solutions containing ions that precipitate silver salts gave a high resistance. Silver nitrate has a high solubility and paper pretreated with nitrate ions gave a low resistivity without sintering. The results obtained show that, by choosing the correct type of paper substrate, it is possible to manufacture printed structures, such as interconnects on paper, without the need for, or at least to reduce the need for, post-print sintering. This phenomenon is, of course, ink specific. Inks without or with a low silver ion content are not expected to behave in this manner. In some sensor applications, a high resistivity is desired and, by using the correct combination of ink and paper, these types of sensors can be facilitated.
|
|
| 6. |
- Andersson, Henrik, Dr, 1975-, et al.
(författare)
-
Variable low-density polylactic acid and microsphere composite material for additive manufacturing
- 2021
-
Ingår i: Additive Manufacturing. - : Elsevier BV. - 2214-8604 .- 2214-7810. ; 40
-
Tidskriftsartikel (refereegranskat)abstract
- Thermally expandable microspheres are extensively used in industry as a lightweight filler for many products. The spheres can expand up to 60 times the initial size and are used for different purposes, including material reduction and surface modification. In fused filament fabrication (FFF), a material is deposited in a layer-by-layer process. Typically, FFF objects need not be solid because such objects are typically used for applications with low mechanical stress. Low material infill percentages are commonly used inside a solid outer shell to reduce material usage, weight, and manufacturing time. This paper proposes a new composite filament for FFF consisting of polylactic acid (PLA) and thermally expandable Expancel microspheres in the form of masterbatch granules. These filaments contain unexpanded microspheres that can be expanded during printing by heating. Two types of filaments containing 2 wt% and 5 wt% of masterbatch granules were manufactured and tested. The filaments were successfully used with a commercial 3D printer to manufacture objects with a density of 45% compared to objects manufactured using standard PLA. The tensile strength of these objects changed linearly with density and was comparable to that of PLA objects of the same density prepared using infill patterns. The composite filaments are advantageous in that they can reduce the amount of material used, as is currently done by using different amounts of infill in a pattern. Further, by varying the nozzle temperature, their density can be adjusted directly during printing as well as during fabrication to produce layers of different densities in the same object.
|
|
| 7. |
|
|
| 8. |
- Andres, Britta, 1986-
(författare)
-
Low-Cost, Environmentally Friendly Electric Double-Layer Capacitors : Concept, Materials and Production
- 2017
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Today’s society is currently performing an exit from fossilfuel energy sources. The change to sustainable alternativesrequires inexpensive and environmentally friendly energy storagedevices. However, most current devices contain expensive,rare or toxic materials. These materials must be replaced bylow-cost, abundant, nontoxic components.In this thesis, I suggest the production of paper-based electricdouble-layer capacitors (EDLCs) to meet the demand oflow-cost energy storage devices that provide high power density.To fulfill the requirements of sustainable and environmentallyfriendly devices, production of EDLCs that consist of paper,graphite and saltwater is proposed. Paper can be used as aseparator between the electrodes and as a substrate for theelectrodes. Graphite is suited for use as an active material in theelectrodes, and saltwater can be employed as an electrolyte.Westudied and developed different methods for the productionof nanographite and graphene from graphite. Composites containingthese materials and similar advanced carbon materialshave been tested as electrode materials in EDLCs. I suggest theuse of cellulose nanofibers (CNFs) or microfibrillated cellulose(MFC) as a binder in the electrodes. In addition to improvedmechanical stability, the nanocellulose improved the stabilityof graphite dispersions and the electrical performance of theelectrodes. The influence of the cellulose quality on the electricalproperties of the electrodes and EDLCs was investigated.The results showed that the finest nanocellulose quality is notthe best choice for EDLC electrodes; MFC is recommended forthis application instead. The results also demonstrated thatthe capacitance of EDLCs can be increased if the electrodemasses are adjusted according to the size of the electrolyte ions.Moreover, we investigated the issue of high contact resistancesat the interface between porous carbon electrodes and metalcurrent collectors. To reduce the contact resistance, graphitefoil can be used as a current collector instead of metal foils.Using the suggested low-cost materials, production methodsand conceptual improvements, it is possible to reduce the material costs by more than 90% in comparison with commercialunits. This confirms that paper-based EDLCs are apromising alternative to conventional EDLCs. Our findings andadditional research can be expected to substantially supportthe design and commercialization of sustainable EDLCs andother green energy technologies.
|
|
| 9. |
- Arshadi Rastabi, Shahrzad, et al.
(författare)
-
Metallurgical investigation of aluminum anode behavior in water-in-salt electrolyte for aqueous aluminum batteries
- 2022
-
Ingår i: Journal of Power Sources. - : Elsevier. - 0378-7753 .- 1873-2755. ; 523
-
Tidskriftsartikel (refereegranskat)abstract
- Although ionic liquid electrolytes (ILs) are environmentally unfriendly, they are the most common electrolyte used in aluminum-ion batteries (AIB). Aqueous electrolytes offer a more sustainable alternative, but problem with oxide passivating barrier on Al surface becomes more profound. Recently, a new sub-class of aqueous electrolytes, water-in-salt (WIS) of (AlCl3·6H2O), has been considered, but experimental validation of the behavior of the Al electrode over cycling is required. This work investigates aluminum/graphitic cells using WIS electrolytes with a mass ratio of salt to water of 4, 8, and 12 and finds that they show similar trends in cycling performance. The degradation observed over cycling has been attributed to the formation of a detrimental solid electrolyte interphase (SEI) layer on the Al surface. It was found that WIS 4 increased Al corrosion, resulting in a slightly higher capacity and longer cycling life. Metallurgical observation showed that the Al matrix has a tendency to initiate corrosion around Al3Fe intermetallic phases in both WIS and ILs. This implies that the presence of Al3Fe particles allows the electrolyte to break the oxide barrier and access the bulk Al. These results suggests that metallurgical treatments are important to enhance the electrochemical performance of AIB.
|
|
| 10. |
- Arshadi Rastabi, Shahrzad, et al.
(författare)
-
Porous NiMoO4-NrGO as a Battery-Like Electrode Material for Aqueous Hybrid Supercapacitors
- 2023
-
Ingår i: Journal of Composites Science. - : MDPI. - 2504-477X. ; 7:6
-
Tidskriftsartikel (refereegranskat)abstract
- Recently, much research has investigated nanocomposites and their properties for the development of energy storage systems. Supercapacitor performance is usually enhanced by the use of porous electrode structures, which produce a larger surface area for reaction. In this work, a biocompatible polymer of starch medium was used to create the porous nanostructure. Two powders, i.e., Nickel molybdate/reduced graphene oxide (NiMoO4-rGO) and Nickel molybdate/nitrogen-doped reduced graphene oxide (NiMoO4-NrGO), were synthesized using the deposition method in a medium containing starch, nickel nitrate salts, sodium molybdate, and graphene oxide powder. In terms of electrochemical performance, the NiMoO4-NrGO electrode displayed a higher specific capacitance, i.e., 932 Fg−1 (466 Cg−1), than the NiMoO4-rGO electrode, i.e., 884 Fg−1 (442 Cg−1), at a current density of 1 Ag−1. In fact, graphene oxide sheets could lose more oxygen groups in the presence of ammonia, resulting in increased electrical conductivity. For the asymmetric supercapacitor of NiMoO4-NrGO//AC, the specific capacitance at 1 Ag−1, energy density, and power density were 101.2 Fg−1 (111.32 Cg−1), 17 Wh kg−1, and 174.4 kW kg−1, respectively. In addition, this supercapacitor material displayed a good cycling stability of over 82%.
|
|
