| 1. |
|
|
| 2. |
|
|
| 3. |
|
|
| 4. |
|
|
| 5. |
- Wang, Zhen, et al.
(författare)
-
Dynamic Networks of Cellulose Nanofibrils Enable Highly Conductive and Strong Polymer Gel Electrolytes for Lithium-Ion Batteries
- 2023
-
Ingår i: Advanced Functional Materials. - : Wiley. - 1616-301X .- 1616-3028. ; 33:30
-
Tidskriftsartikel (refereegranskat)abstract
- Tunable dynamic networks of cellulose nanofibrils (CNFs) are utilized to prepare high-performance polymer gel electrolytes. By swelling an anisotropically dewatered, but never dried, CNF gel in acidic salt solutions, a highly sparse network is constructed with a fraction of CNFs as low as 0.9%, taking advantage of the very high aspect ratio and the ultra-thin thickness of the CNFs (micrometers long and 2–4 nm thick). These CNF networks expose high interfacial areas and can accommodate massive amounts of the ionic conductive liquid polyethylene glycol-based electrolyte into strong homogeneous gel electrolytes. In addition to the reinforced mechanical properties, the presence of the CNFs simultaneously enhances the ionic conductivity due to their excellent strong water-binding capacity according to computational simulations. This strategy renders the electrolyte a room-temperature ionic conductivity of 0.61 ± 0.12 mS cm−1 which is one of the highest among polymer gel electrolytes. The electrolyte shows superior performances as a separator for lithium iron phosphate half-cells in high specific capacity (161 mAh g−1 at 0.1C), excellent rate capability (5C), and cycling stability (94% capacity retention after 300 cycles at 1C) at 60 °C, as well as stable room temperature cycling performance and considerably improved safety compared with commercial liquid electrolyte systems.
|
|
| 6. |
|
|
| 7. |
|
|
| 8. |
|
|
| 9. |
- Östmans, Rebecca, et al.
(författare)
-
Elastoplastic behavior of anisotropic, physically crosslinked hydrogel networks comprising stiff, charged fibrils in an electrolyte
- 2023
-
Ingår i: Soft Matter. - : Royal Society of Chemistry (RSC). - 1744-683X .- 1744-6848. ; 19:15, s. 2792-2800
-
Tidskriftsartikel (refereegranskat)abstract
- Fibrillar hydrogels are remarkably stiff, low-density networks that can hold vast amounts of water. These hydrogels can easily be made anisotropic by orienting the fibrils using different methods. Unlike the detailed and established descriptions of polymer gels, there is no coherent theoretical framework describing the elastoplastic behavior of fibrillar gels, especially concerning anisotropy. In this work, the swelling pressures of anisotropic fibrillar hydrogels made from cellulose nanofibrils were measured in the direction perpendicular to the fibril alignment. This experimental data was used to develop a model comprising three mechanical elements representing the network and the osmotic pressure due to non-ionic and ionic surface groups on the fibrils. At low solidity, the stiffness of the hydrogels was dominated by the ionic swelling pressure governed by the osmotic ingress of water. Fibrils with different functionality show the influence of aspect ratio, chemical functionality, and the remaining amount of hemicelluloses. This general model describes physically crosslinked hydrogels comprising fibrils with high flexural rigidity - that is, with a persistence length larger than the mesh size. The experimental technique is a framework to study and understand the importance of fibrillar networks for the evolution of multicellular organisms, like plants, and the influence of different components in plant cell walls.
|
|
| 10. |
- Östmans, Rebecca, et al.
(författare)
-
Solidified water at room temperature hosting tailored fluidic channels by using highly anisotropic cellulose nanofibrils
- 2024
-
Ingår i: Materials Today Nano. - : Elsevier BV. - 2588-8420. ; 26
-
Tidskriftsartikel (refereegranskat)abstract
- Highly anisotropic cellulose nanofibrils can solidify liquid water, creating self-supporting structures by incorporating a tiny number of fibrils. These fibrillar hydrogels can contain as much as 99.99 wt% water. The structure and mechanical properties of fibrillar networks have so far not been completely understood, nor how they solidify the bulk water at such low particle concentrations. In this work, the mechanical properties of cellulose fibrillar hydrogels in the dilute regime from a wt% perspective have been studied, and an elastoplastic model describing the network structure and its mechanics is presented. A significant insight from this work is that the ability of the fibrils to solidify water is very dependent on particle stiffness and the number of contact points it can form in the network structure. The comparison between the experimental results and the theoretical model shows that the fibrillar networks in the dilute regime form via a non-stochastic process since the fibrils have the time and freedom to find contact points during network formation by translational and rotational diffusion. The formed, dilute fibrillar network deforms by sliding fibril contacts upon straining the network beyond its elastic limit. Our results also show that before macroscopic failure, the fibril contacts are restored once the load is released. The exceptional properties of this solidified water are exploited to host fluidic channels, allowing directed fluid transportation in water. Finally, the microfluidic channels formed in the hydrogels are tailored by the layer-by-layer technique to be interactive against external stimuli, a characteristic envisioned to be useful in biomedical applications.
|
|
