| 1. |
- Bravo, L, et al.
(författare)
-
- 2021
-
swepub:Mat__t
|
|
| 2. |
- Tabiri, S, et al.
(författare)
-
- 2021
-
swepub:Mat__t
|
|
| 3. |
- Ademuyiwa, Adesoji O., et al.
(författare)
-
Determinants of morbidity and mortality following emergency abdominal surgery in children in low-income and middle-income countries
- 2016
-
Ingår i: BMJ Global Health. - : BMJ Publishing Group Ltd. - 2059-7908. ; 1:4
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Child health is a key priority on the global health agenda, yet the provision of essential and emergency surgery in children is patchy in resource-poor regions. This study was aimed to determine the mortality risk for emergency abdominal paediatric surgery in low-income countries globally.Methods: Multicentre, international, prospective, cohort study. Self-selected surgical units performing emergency abdominal surgery submitted prespecified data for consecutive children aged <16 years during a 2-week period between July and December 2014. The United Nation's Human Development Index (HDI) was used to stratify countries. The main outcome measure was 30-day postoperative mortality, analysed by multilevel logistic regression.Results: This study included 1409 patients from 253 centres in 43 countries; 282 children were under 2 years of age. Among them, 265 (18.8%) were from low-HDI, 450 (31.9%) from middle-HDI and 694 (49.3%) from high-HDI countries. The most common operations performed were appendectomy, small bowel resection, pyloromyotomy and correction of intussusception. After adjustment for patient and hospital risk factors, child mortality at 30 days was significantly higher in low-HDI (adjusted OR 7.14 (95% CI 2.52 to 20.23), p<0.001) and middle-HDI (4.42 (1.44 to 13.56), p=0.009) countries compared with high-HDI countries, translating to 40 excess deaths per 1000 procedures performed.Conclusions: Adjusted mortality in children following emergency abdominal surgery may be as high as 7 times greater in low-HDI and middle-HDI countries compared with high-HDI countries. Effective provision of emergency essential surgery should be a key priority for global child health agendas.
|
|
| 4. |
- Thomas, HS, et al.
(författare)
-
- 2019
-
swepub:Mat__t
|
|
| 5. |
- Abbas, Ashraf H., et al.
(författare)
-
Aesthetic Outcome After Reconstruction of Complex SoftTissue Defects with Free Antero-Lateral Thigh Flap UsingSimple Equipment
- 2015
-
Ingår i: Journal of surgery. - : Science publishing group. - 2330-0914 .- 2330-0930. ; 3:2-1, s. 36-41
-
Tidskriftsartikel (refereegranskat)abstract
- Aim: We aimed to assess the aesthetic outcome of surgical reconstruction by free ALT flap using binocular single-refraction magnifying glasses and a modified post- operative surveillance protocol. Methods: 16 patients were operated for free antero-lateral thigh flap to reconstruct complex soft tissue defects with a close clinical follow up protocol for post operative care depending on the attending personnel in the Plastic surgery unit, Suez Canal University hospital, Ismailia, Egypt. Aesthetic outcome was assessed using a questionnaire based on Posch et al. 2005, including the following items colour, contour, presence of hair, overall appearance and donor site scar. Results: The patients’ assessed aesthetic outcome was acceptable in majority of the cases; median score was 4 for all assessed items. Complete flap loss occurred in one case, other complications as arterial thrombosis and hematomas and infection were detected and managed accordingly with flap salvage in the 3 complicated cases. Conclusion: The result suggests that the proposed protocol is sufficient as an alternative. The aesthetic outcome assessed by the patient and the failure rate was in line with other studies.
|
|
| 6. |
- Abbas, Ghazanfar, et al.
(författare)
-
Electrochemical study of nanostructured electrode for low-temperature solid oxide fuel cell (LTSOFC)
- 2014
-
Ingår i: International Journal of Energy Research. - : Hindawi Limited. - 0363-907X .- 1099-114X. ; 38:4, s. 518-523
-
Tidskriftsartikel (refereegranskat)abstract
- Zn-based nanostructured Ba0.05Cu0.25Fe0.10Zn0.60O (BCFZ) oxide electrode material was synthesized by solid-state reaction for low-temperature solid oxide fuel cell. The cell was fabricated by sandwiching NK-CDC electrolyte between BCFZ electrodes by dry press technique, and its performance was assessed. The maximum power density of 741.87 mW-cm(-2) was achieved at 550 degrees C. The crystal structure and morphology were characterized by X-ray diffractometer (XRD) and SEM. The particle size was calculated to be 25 nm applying Scherer's formula from XRD data. Electronic conductivities were measured with the four-probe DC method under hydrogen and air atmosphere. AC Electrochemical Impedance Spectroscopy of the BCFZ oxide electrode was also measured in hydrogen atmosphere at 450 degrees C.
|
|
| 7. |
- Abbas, Ghazanfar, et al.
(författare)
-
Preparation and Characterization of Nanocomposite Calcium Doped Ceria Electrolyte With Alkali Carbonates (NK-CDC) for SOFC
- 2011
-
Ingår i: Journal of Fuel Cell Science and Technology. - : ASME International. - 1550-624X .- 1551-6989. ; 8:4, s. 041013-
-
Tidskriftsartikel (refereegranskat)abstract
- The entire world's challenge is to find out the renewable energy sources due to rapid depletion of fossil fuels because of their high consumption. Solid oxide fuel cells (SOFCs) are believed to be the best alternative source, which converts chemical energy into electricity without combustion. Nanostructure study is required to develop highly ionic conductive electrolytes for SOFCs. In this work, the calcium doped ceria (Ce0.8Ca0.2O1.9) coated with 20% molar ratio of two alkali carbonates (CDC-M: MCO3, where M = Na and K) electrolyte was prepared by coprecipitation method. Ni based electrode was used to fabricate the cell by dry pressing technique. The crystal structure and surface morphology were characterized by an X-ray diffractometer, scanning electron microscopy (SEM), and high resolution transmission electron microscopy (TEM). The particle size was calculated in the range 10-20 nm by Scherer's formula and compared with SEM and TEM results. The ionic conductivity was measured by using ac electrochemical impedance spectroscopy method. The activation energy was also evaluated. The performance of the cell was measured 0.567 W/cm(2) at temperature 550 degrees C with hydrogen as a fuel.
|
|
| 8. |
- Abbas, Ghazanfar, et al.
(författare)
-
Study of CuNiZnGdCe-Nanocomposite Anode for Low Temperature SOFC
- 2012
-
Ingår i: Nanoscience and Nanotechnology Letters. - : American Scientific Publishers. - 1941-4900 .- 1941-4919. ; 4:4, s. 389-393
-
Tidskriftsartikel (refereegranskat)abstract
- Composite electrodes of Cu0.16Ni0.27Zn0.37Ce0.16Gd0.04 (CNZGC) oxides have been successfully synthesized by solid state reaction method as anode material for low temperature solid oxide fuel cell (LTSOFC). These electrodes are characterized by XRD followed by sintering at various time periods and temperatures. Particle size of optimized composition was calculated 40-85 nm and sintered at 800 degrees C for 4 hours. Electrical conductivity of 4.14 S/cm was obtained at a temperature of 550 degrees C by the 4-prob DC method. The activation energy was calculated 4 x 10(-2) eV at 550 degrees C. Hydrogen was used as fuel and air as oxidant at anode and cathode sides respectively. I-V/I-P curves were obtained in the temperature range of 400-550 degrees C. The maximum power density was achieved for 570 mW/cm(2) at 550 degrees C.
|
|
| 9. |
- Abbas, Ghazanfar, et al.
(författare)
-
Synthesize and characterization of nanocomposite anodes for low temperature solid oxide fuel cell
- 2015
-
Ingår i: International journal of hydrogen energy. - : Elsevier BV. - 0360-3199 .- 1879-3487. ; 40:1, s. 891-897
-
Tidskriftsartikel (refereegranskat)abstract
- Solid oxide fuel cells have much capability to become an economical alternative energy conversion technology having appropriate materials that can be operated at comparatively low temperature in the range of 400-600 degrees C. The nano-scale engineering has been incorporated to improve the catalytic activity of anode materials for solid oxide fuel cells. Nanostructured Al0.10NixZn0.90-xO oxides were prepared by solid state reaction, which were then mixed with the prepared Gadolinium doped Ceria GDC electrolyte. The crystal structure and surface morphology were characterized by XRD and SEM. The particle size was evaluated by XRD data and found in the range of 20-50 nm, which was then ensured by SEM pictures. The pellets of 13 mm diameter were pressed by dry press technique and electrical conductivities (DC and AC) were determined by four probe techniques and the values have been found to be 10.84 and 4.88 S/cm, respectively at hydrogen atmosphere in the temperature range of 300-600 degrees C. The Electrochemical Impedance Spectroscopy (EIS) analysis exhibits the pure electronic behavior at hydrogen atmosphere. The maximum power density of ANZ-GDC composite anode based solid oxide fuel cell has been achieved 705 mW/cm(2) at 550 degrees C.
|
|
| 10. |
- Abdelrahman, Islam, et al.
(författare)
-
A prospective randomized cost billing comparison of local fasciocutaneous perforator versus free Gracilis flap reconstruction for lower limb in a developing economy
- 2016
-
Ingår i: Journal of Plastic, Reconstructive & Aesthetic Surgery. - : Elsevier. - 1748-6815 .- 1878-0539. ; 69:8, s. 1121-1127
-
Tidskriftsartikel (refereegranskat)abstract
- Distal half leg complex wounds are usually a formidable problem that necessitates either local or free flap coverage. The aim of this study was to compare cost billing charges in free Gracilis flap (fGF) and local fasciocutaneous perforator flap (lFPF) in reconstructing complex soft tissue leg and foot defects. Patients and methods: Thirty consecutive adult (amp;gt; 15-year-old) patients with soft tissue defects in the leg and/or foot requiring tissue coverage with a flap in the period between 2012 and 2015 were randomly assigned (block randomization) to either an fGF or lFPF procedure. The outcome measures addressed were total billed charges costs, perioperative billed charges cost, partial or complete flap loss, length of hospital stay, inpatient postsurgical care duration, complications, operating time and number of operative scrub staff. Results: One patient suffered from complete flap loss in each group. Reconstruction with lFPF showed total lower billed charges costs by 62% (2509 USD) (p amp;lt; 0.001) and perioperative billed charges cost by 54% (779 USD) (p amp;lt; 0.001), and shorter total hospital stay (36.5 days; p amp;lt; 0.001), inpatient postsurgical care duration (6.4 days; p amp;lt; 0.001), operating time (4.3 h; p amp;lt; 0.001) and fewer scrub staff (2.2 persons; p amp;lt; 0.001). Conclusion: These results suggest that neither flap is totally superior to the other; the choice should instead be based on the outcome sought and logistics. lFPF requires lower billed charges cost and resource use and saves operative time and personnel and reduces length of hospital stay. Our approach changed towards using perforator flaps in medium-sized defects, keeping the free flap option for larger defects. (C) 2016 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.
|
|
