| 1. |
- Skripnyak, Natalia, 1991-, et al.
(författare)
-
Mixing enthalpies of alloys with dynamical instability : bcc Ti-V system
- 2020
-
Ingår i: Acta Materialia. - : Elsevier BV. - 1359-6454 .- 1873-2453. ; 188, s. 145-154
-
Tidskriftsartikel (refereegranskat)abstract
- Enthalpy of mixing is among the key materials parameters to determine phase stability and phase transformations in solid solutions. The possibility to predict it from first principles in the framework of the density functional theory is one of the corner stones of the modern materials modeling and the future data-driven materials design. Here we have considered body-centered cubic (bcc) Ti-V alloys, a system with high potential for aerospace, automotive biomedical and energy applications, which is known to exhibit the dynamical instability of the crystal lattice for Ti-rich alloys at low temperature. We have calculated the mixing enthalpies ΔH of bcc Ti-V alloys in the whole interval of concentration at high temperature using ab initio molecular dynamics (AIMD) simulations. A comparison with state-of-the-art static calculations at temperature 0 K shows drastic difference between the two methods: while AIMD predicts positive values of ΔH in the whole range of concentrations, the static zero-temperature simulations result in negative values of ΔH for Ti-rich alloys. We have measured the mixing enthalpy of bcc Ti-V alloys experimentally at 1073 K using an isoperibol high temperature Tian-Calvet calorimeter and found that the enthalpies are positive, in agreement with our finite temperature AIMD calculations. We attribute the failure of the standard static calculations of ΔH to lattice distortions associated with the dynamical instability of bcc Ti-V alloys at zero temperature and argue that the effect should be generally important in theoretical predictions of thermodynamic properties, especially for systems with dynamical instability.
|
|
| 2. |
- Davidsson, Joel, 1989-
(författare)
-
Color Centers in Semiconductors for Quantum Applications : A High-Throughput Search of Point Defects in SiC
- 2021
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Point defects in semiconductors have been and will continue to be relevant for applications. Shallow defects realize transistors, which power the modern age of information, and in the not-too-distant future, deep-level defects could provide the foundation for a revolution in quantum information processing. Deep-level defects (in particular color centers) are also of interest for other applications such as a single photon emitter, especially one that emits at 1550 nm, which is the optimal frequency for long-range communication via fiber optics.First-principle calculations can predict the energies and optical properties of point defects. I performed extensive convergence tests for magneto-optical properties, such as zero phonon lines, hyperfine coupling parameters, and zero-field splitting for the four different configurations of the divacancy in 4H-SiC. Comparing the converged results with experimental measurements, a clear identification of the different configurations was made. With this approach, I also identified all configurations for the silicon vacancy in 4H-SiC as well as the divacancy and silicon vacancy in 6H-SiC. The same method was further used to identify two additional configurations belonging to the divacancy present in a 3C stacking fault inclusion in 4H-SiC. I extended the calculated properties to include the transition dipole moment which provides the polarization, intensity, and lifetime of the zero phonon lines. When calculating the transition dipole moment, I show that it is crucial to include the self-consistent change of the electronic orbitals in the excited state due to the geometry relaxation. I tested the method on the divacancy in 4H-SiC, further strengthening the previous identification and providing accurate photoluminescence intensities and lifetimes.Finding stable point defects with the right properties for a given application is a challenging task. Due to the vast number of possible point defects present in bulk semiconductor materials, I designed and implemented a collection of automatic workflows to systematically investigate any point defects. This collection is called ADAQ (Automatic Defect Analysis and Qualification) and automates every step of the theoretical process, from creating defects to predicting their properties. Using ADAQ, I screened about 8000 intrinsic point defect clusters in 4H-SiC. This thesis presents an overview of the formation energy and the most relevant optical properties for these single and double point defects. These results show great promise for finding new color centers suitable for various quantum applications.
|
|
| 3. |
- Ji, Fuxiang, 1991-, et al.
(författare)
-
Remarkable Thermochromism in the Double Perovskite Cs2NaFeCl6
- 2023
-
Ingår i: Advanced Optical Materials. - : Wiley-Blackwell. - 2162-7568 .- 2195-1071.
-
Tidskriftsartikel (refereegranskat)abstract
- Lead-free halide double perovskites (HDPs) have emerged as a new generation of thermochromic materials. However, further materials development and mechanistic understanding are required. Here, a highly stable HDP Cs2NaFeCl6 single crystal is synthesized, and its remarkable and fully reversible thermochromism with a wide color variation from light-yellow to black over a temperature range of 10 to 423 K is investigated. First-principles, density functional theory (DFT)-based calculations indicate that the thermochromism in Cs2NaFeCl6 is an effect of electron–phonon coupling. The temperature sensitivity of the bandgap in Cs2NaFeCl6 is up to 2.52 meVK−1 based on the Varshni equation, which is significantly higher than that of lead halide perovskites and many conventional group-IV, III–V semiconductors. Meanwhile, this material shows excellent environmental, thermal, and thermochromic cycle stability. This work provides valuable insights into HDPs' thermochromism and sheds new light on developing efficient thermochromic materials.
|
|
| 4. |
- Ji, Fuxiang, 1991-, et al.
(författare)
-
Remarkable Thermochromism in the Double Perovskite Cs2NaFeCl6
- 2024
-
Ingår i: Advanced Optical Materials. - : John Wiley & Sons. - 2162-7568 .- 2195-1071. ; 12:8
-
Tidskriftsartikel (refereegranskat)abstract
- Lead-free halide double perovskites (HDPs) have emerged as a new generation of thermochromic materials. However, further materials development and mechanistic understanding are required. Here, a highly stable HDP Cs2NaFeCl6 single crystal is synthesized, and its remarkable and fully reversible thermochromism with a wide color variation from light-yellow to black over a temperature range of 10 to 423 K is investigated. First-principles, density functional theory (DFT)-based calculations indicate that the thermochromism in Cs2NaFeCl6 is an effect of electron-phonon coupling. The temperature sensitivity of the bandgap in Cs2NaFeCl6 is up to 2.52 meVK(-1) based on the Varshni equation, which is significantly higher than that of lead halide perovskites and many conventional group-IV, III-V semiconductors. Meanwhile, this material shows excellent environmental, thermal, and thermochromic cycle stability. This work provides valuable insights into HDPs' thermochromism and sheds new light on developing efficient thermochromic materials.
|
|
| 5. |
- Laniel, Dominique, et al.
(författare)
-
Aromatic hexazine [N6]4− anion featured in the complex structure of the high-pressure potassium nitrogen compound K9N56
- 2023
-
Ingår i: Nature Chemistry. - : NATURE PORTFOLIO. - 1755-4330 .- 1755-4349. ; 15:5, s. 641-646
-
Tidskriftsartikel (refereegranskat)abstract
- The recent high-pressure synthesis of pentazolates and the subsequent stabilization of the aromatic [N-5](-) anion at atmospheric pressure have had an immense impact on nitrogen chemistry. Other aromatic nitrogen species have also been actively sought, including the hexaazabenzene N-6 ring. Although a variety of configurations and geometries have been proposed based on ab initio calculations, one that stands out as a likely candidate is the aromatic hexazine anion [N-6](4-). Here we present the synthesis of this species, realized in the high-pressure potassium nitrogen compound K9N56 formed at high pressures (46 and 61 GPa) and high temperature (estimated to be above 2,000 K) by direct reaction between nitrogen and KN3 in a laser-heated diamond anvil cell. The complex structure of K9N56-composed of 520 atoms per unit cell-was solved based on synchrotron single-crystal X-ray diffraction and corroborated by density functional theory calculations. The observed hexazine anion [N-6](4-) is planar and proposed to be aromatic.
|
|
| 6. |
- Alling, Björn, 1980-
(författare)
-
Configurational and Magnetic Interactions in Multicomponent Systems
- 2010
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- This thesis is a theoretical study of configurational and magnetic interactions in multicomponent solids. These interactions are the projections onto the configurational and magnetic degrees of freedom of the underlying electronic quantum mechanical system, and can be used to model, explain and predict the properties of materials. For example, the interactions govern temperature induced configurational and magnetic order-disorder transitions in Heusler alloys and ternary nitrides.In particular three perspectives are studied. The first is how the interactions can be derived from first-principles calculations at relevant physical conditions. The second is their consequences, like the critical temperatures for disordering, obtained with e.g. Monte Carlo simulations. The third is their origin in terms of the underlying electronic structure of the materials.Intrinsic defects in the half-Heusler system NiMnSb are studied and it is found that low-energy defects do not destroy the important half-metallic property at low concentrations. Deliberate doping of NiMnSb with 3d-metals is considered and it is found that replacing some Ni with extra Mn or Cr creates new strong magnetic interactions which could be beneficial for applications at elevated temperature. A self-consistent scheme to include the effects of thermal expansion and one-electron excitations in the calculation of the magnetic critical temperature is introduced and applied to a study of Ni1−xCuxMnSb.A supercell implementation of the disordered local moments approach is suggested and benchmarked for the treatment of paramagnetic CrN as a disordered magnetic phase. It is found that the orthorhombic-to-cubic phase transition in this nitride can be understood as a first-order magnetic order-disorder transition. The ferromagnetism in Ti1−xCrxN solid solutions, an unusual property in nitrides, is explained in terms of a charge transfer induced change in the Cr-Cr magnetic interactions.Cubic Ti1−xAlxN solid solutions displays a complex and concentration dependent phase separation tendency. A unified cluster expansion method is presented that can be used to simulate the configurational thermodynamics of this system. It is shown that short range clustering do influence the free energy of mixing but only slightly change the isostructural phase diagram as compared to mean-field estimates.
|
|
| 7. |
- Dubrovinsky, Leonid, et al.
(författare)
-
Materials synthesis at terapascal static pressures
- 2022
-
Ingår i: Nature. - London, United Kingdom : Nature Publishing Group. - 0028-0836 .- 1476-4687. ; 605:7909, s. 274-278
-
Tidskriftsartikel (refereegranskat)abstract
- Theoretical modelling predicts very unusual structures and properties of materials at extreme pressure and temperature conditions(1,2). Hitherto, their synthesis and investigation above 200 gigapascals have been hindered both by the technical complexity of ultrahigh-pressure experiments and by the absence of relevant in situ methods of materials analysis. Here we report on a methodology developed to enable experiments at static compression in the terapascal regime with laser heating. We apply this method to realize pressures of about 600 and 900 gigapascals in a laser-heated double-stage diamond anvil cell(3), producing a rhenium-nitrogen alloy and achieving the synthesis of rhenium nitride Re7N3-which, as our theoretical analysis shows, is only stable under extreme compression. Full chemical and structural characterization of the materials, realized using synchrotron single-crystal X-ray diffraction on microcrystals in situ, demonstrates the capabilities of the methodology to extend high-pressure crystallography to the terapascal regime.
|
|
| 8. |
- Jönsson, Johan, 1989-
(författare)
-
Electronic transitions and correlation effects : From pure elements to complex materials
- 2020
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Macroscopic properties of real materials, such as conductivity, magneticproperties, crystal structure parameters, etc. are closely related or evendetermined by the configuration of their electrons, characterized by electronicstructure. By changing the conditions, e.g, pressure, temperature, magnetic/electric field, chemical doping, etc. one can modify the electronic structure ofsolids and therefore induce a phase transition(s) between different electronic andmagnetic states. One famous example is a Mott metal-to-insulator phase transition,at which a material undergoes a significant, often many orders of magnitude, changeof conductivity caused by the interplay between itineracy and localization of thecarriers.Electronic topological transitions (ETT) involvechanges in the topology of a metal's Fermi surface. This thesis investigates theeffect of such electronic transitions in various materials, ranging from pureelements to complex compounds.To describe the interplay between electronic transitionsand properties of real materials,different state-of-the-art computational methods are used. The densityfunctional theory(DFT), as well as the DFT + U method, is used to calculatestructural properties. The validity of recently introduced exchange-correlationfunctionals, such as the strongly constrained and appropriately normed (SCAN)functional, is also assessed for magnetic elements. In order toinclude dynamical effects of electron interactions we use the DFT + dynamical meanfield theory (DFT + DMFT) method.Experiments in hcp-Os have reported peculiarities in the ratio betweenlattice parameters at high pressure. Previous calculations have suggested these transitions maybe related to ETTs and even crossings of core levels at ultra high pressure. Inthis thesis it is shownthat the crossing of core levels is a general feature of heavy transitionmetals. Experiments have therefore been performed to look for indications ofthis transition in Ir using X-ray absorption spectroscopy. In NiO, strongrepulsion between electrons leads to a Mott insulating state at ambientconditions. It has long been predicted that high pressure will lead to aninsulator-to-metal transition. This has been suggested to be accompanied by aloss of magnetic order, and a structural phase transition. In collaboration withexperimentalists we look for thistransition by investigating the X-ray absorption spectra as well as themagnetic hyperfine field. We find no evidence of a Mott transition up to 280GPa. In the Mott insulator TiPO4, application of external pressure has beensuggested to lead to a spin-Peierls transition at room temperature. Weinvestigate the dimerisation and the magnetic structure of TiPO4 at high pressure.As pressure is increased further, TiPO4 goes through a metal to insulatortransition before an eventual crystallographic phase transition. Remarkably, thenew high pressure phases are found to be insulators; the Mott insulating stateis restored.MAX phases are layered materials that combinemetallic and ceramic properties and feature layers of M-metal and X-C or N atomsinterconnected by A-group atoms. Magnetic MAX-phases with their low dimensionalmagnetism are promising candidates for applications in e.g., spintronics.The validity of various theoretical approaches are discussed in connection tothe magnetic MAX-phase Mn2GaC. Using DFT and DFT + DMFT we consider the hightemperature paramagnetic state, and whether the magnetic moments are formed bylocalized or itinerant electrons.
|
|
| 9. |
- Mozafari, Elham, 1983-
(författare)
-
Theoretical Description of the Electron-Lattice Interaction in Molecular and Magnetic Crystals
- 2016
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Electron-lattice interactions are often considered not to play a major role in material's properties as they are assumed to be small, the second-order effects. However, this study shows the importance of taking these effects into account in the simulations. My results demonstrate the impact of the electron-lattice interaction on the physics of the material and our understanding from it. One way to study these effects is to add them as perturbations to the unperturbed Hamiltonians in numerical simulations. The main objective of this thesis is to study electron-lattice interactions in molecular and magnetic crystals. It is devoted to developing numerical techniques considering model Hamiltonians and first-principles calculations to include the effect of lattice vibrations in the simulations of the above mentioned classes of materials.In particular, I study the effect of adding the non-local electron-phonon coupling on top of the Holstein Hamiltonian to study the polaron stability and polaron dynamics in molecular crystals. The numerical calculations are based on the semi-empirical Holstein-Peierls model in which both intra (Holstein) and inter (Peierls) molecular electron-phonon interactions are taken into account. I study the effect of different parameters including intra and intermolecular electron-phonon coupling strengths and their vibrational frequencies, the transfer integral and the electric field on polaron stability. I found that in an ordered two dimensional molecular lattice the polaron is stable for only a limited range of parameter sets with the polaron formation energies lying in the range between 50 to 100 meV. Using the stable polaron solutions, I applied an electric field to the system and I observed that the polaron is dynamically stable and mobile for only a limited set of parameters. Adding disorder to the system will result in even more restricted parameter set space for which the polaron is stable and moves adiabatically with a constant velocity. In order to study the effect of temperature on polaron dynamics, I include a random force in Newtonian equations of motion in a one dimensional molecular lattice. I found that there is a critical temperature above which the polaron destabilizes and becomes delocalized.Moreover, I study the role of lattice vibrations coupled to magnetic degrees of freedom in finite temperature paramagnetic state of magnetic materials. Calculating the properties of paramagnetic materials at elevated temperatures is a cumbersome task. In this thesis, I present a new method which allows us to couple lattice vibrations and magnetic disorder above the magnetic transition temperature and treat them on the same footing. The method is based on the combination of disordered local moments model and ab initio molecular dynamics (DLM-MD). I employ the method to study different physical properties of some model systems such as CrN and NiO in which the interaction between the magnetic and lattice degrees of freedom is very strong making them very good candidates for such a study.I calculate the formation energies and study the effect of nitrogen defects on the electronic structure of paramagnetic CrN at high temperatures. Using this method I also study the temperature dependent elastic properties of paramagnetic CrN. The results highlight the importance of taking into account the magnetic excitations and lattice vibrations in the studies of magnetic materials at finite temperatures. A combination of DLM-MD with another numerical technique namely temperature dependent effective potential (TDEP) method is used to study the vibrational free energy and phase stability of CrN. We found that the combination of magnetic and vibrational contributions to the free energy shifts down the phase boundary between the cubic paramagnetic and orthorhombic antiferromagnetic phases of CrN towards the experimental value.I used the stress-strain relation to study the temperature-dependent elastic properties of paramagnetic materials within DLM-MD with CrN as my model system. The results from a combinimation of DLM-MD with another newly developed method, symmetry imposed force constants (SIFC) in conjunction with TDEP is also presented as comparison to DLM-MD results.I also apply DLM-MD method to study the electronic structure of NiO in its paramagnetic state at finite temperatures. I found that lattice vibrations have a prominent impact on the electronic structure of paramagnetic NiO at high temperatures and should be included for the proper description of the density of states.In summary, I believe that the proposed techniques give reliable results and allow us to include the effects from electron-lattice interaction in simulations of materials.
|
|
| 10. |
- Raanaei, Hossein, 1968-
(författare)
-
Tailoring Properties of Materials at the Nanoscale
- 2009
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The knowledge of growth and characterizing techniques is essential for the preparation of high quality thin films and multilayers. Here, structural properties have been investigated by X-ray reflectivity, X-ray diffraction, and transmission electron microscopy while the composition was determined by Rutherford backscattering spectrometry. For the magnetic studies, magneto-optical Kerr effect and X-ray magnetic circular dichroism have been used. The structural properties of the metal/insulator multilayer system, Fe/MgO, have been investigated. The coherency of the layers was influenced by the difference of the atomic distance in the Fe and MgO layers, resulting in long range strain fields. As a consequence, the coherency between the layers is not maintained. The atomic steps can not exist in amorphous materials, due to the absence of well defined atomic distances. Furthermore, the magnetic properties of amorphous materials allow a tuning of magnetic properties such as magnetic anisotropy and ordering temperature. The possibility to imprint arbitrary magnetic anisotropy in nanolaminated magnetic amorphous Co68Fe24Zr8 was demonstrated. The ratio of the orbital to spin moments for both Fe and Co was determined, for both thick and thin layers embedded in amorphous Al70Zr30 layers. When growing Co68Fe24Zr8 /Al2O3 the layers exhibit large changes in layer quality with thickness of the layers, ultimately affecting the magnetic properties of the stack. The use of protective layers is of large importance when performing ex-situ measurements. Most of the materials used were capped by Al2O3, effectively hindering both the reaction with oxygen and water. The penetration of hydrogen through different thicknesses of alumina was investigated. The experiments confirmed high degree of passivation as well as the possibility to selectively diffuse hydrogen through these layers. The use of element specific diffusion barriers allows the tailoring of magnetic properties of magnetic thin films and multilayers.
|
|
