| 1. |
- Gazzotti, Stefano, et al.
(författare)
-
DOX mediated synthesis of PLA-co-PS graft copolymers with matrix-driven self-assembly in PLA-based blends
- 2022
-
Ingår i: European Polymer Journal. - : Elsevier BV. - 0014-3057 .- 1873-1945. ; 170, s. 111157-
-
Tidskriftsartikel (refereegranskat)abstract
- Intriguing phase morphology was formed through self-assembly of polylactide-polystyrene (PLA-co-PS) graft copolymers blended with polylactide (PLA). PLA-co-PS graft copolymers were synthesized by exploiting a styrene-functionalized 1,3-Dioxolan-4-one (StyDOX) monomer through a two-step procedure and their structure was confirmed. Different amounts of PLA-co-PS and commercial PLA were solution cast to blend films. Etching of amorphous PLA revealed the presence of spherical micrometer sized domains dispersed within the films, arising from the self-assembly behavior of PLA-co-PS caused by the immiscibility of PS-grafts in the PLA matrix. EDS and IR imaging analyses further revealed that these microspheres were characterized by a PS-rich core opposed to the PLA-rich outer shell, which is expected to be miscible and able to form favorable interactions with the PLA matrix. PLA/PS blends were also prepared with different loadings of PLA-co-PS. The ability of PLA-co-PS to compatibilize the two phases was assessed through rheological analyses. Finally, the possibility to chemically recycle the copolymer was evaluated.
|
|
| 2. |
- Gustavsson, Lotta H., et al.
(författare)
-
Thermoplastic "All-Cellulose" Composites with Covalently Attached Carbonized Cellulose
- 2020
-
Ingår i: Biomacromolecules. - : American Chemical Society (ACS). - 1525-7797 .- 1526-4602. ; 21:5, s. 1752-1761
-
Tidskriftsartikel (refereegranskat)abstract
- Thermoplastic "all-cellulose" composites were synthesized by covalent functionalization of cellulose acetate (CA) with oxidized carbonized cellulose (OCC). The OCC were manufactured via microwave-assisted hydrothermal carbonization (HTC) of cellulose followed by oxidation and dialysis. The OCC were of micrometer-size, had plane morphology and contained a variety of oxygen functionalities, enabling transformation into acyl chlorinated OCC under moderate reaction conditions. The synthesis of OCC-modified CA composites and neat CA were performed in the recyclable ionic liquid 1-allyl-3-methylimidazolium chloride. The degree of acetylation and amount of OCC were varied to establish their influence on thermal and physical properties of the composites. The OCC-modified CA composites displayed a notably enhanced film-forming ability, which led to improved optical and mechanical properties compared to neat CA. In addition, it was shown that OCC-modified CA composites can be synthesized from waste products, such as paper tissues. The OCC-modification was demonstrated to be a promising route to transparent and strong thermoplastic "all-cellulose" composites with moderate flexibility.
|
|
| 3. |
- Adolfsson, Karin H., et al.
(författare)
-
Importance of Surface Functionalities for Antibacterial Properties of Carbon Spheres
- 2019
-
Ingår i: Advanced Sustainable Systems. - : Wiley. - 2366-7486.
-
Tidskriftsartikel (refereegranskat)abstract
- Carbon spheres (CS) are interesting materials for antibacterial applications. Herein, CS are produced by a green process utilizing microwave-assisted hydrothermal treatment of cellulose. The CS are then postmodified in acidic and basic solutions to evaluate the influence of different functionalities on antibacterial properties. CS contain OH/COOH, C Symbol of the Klingon Empire C, and C Symbol of the Klingon Empire O functionalities, while O-CS produced by acid treatment of CS have additional COOH, and NH/NH2 groups, resulting in carbon spheres with negatively and positively charged groups in dispersion. Treatment with base (Na-CS) removes low molecular weight species with oxygen and results in carbon spheres with the highest C/O ratio. CS, O-CS, and Na-CS have nonporous morphology and are in micro/nanometer sizes, although, smaller sized spheres, hollow spheres, and fragments are also attained in the case of O-CS. O-CS show antibacterial activity toward both Gram-positive Staphylococcus aureus (S. aureus) and Gram-negative Pseudomonas aeruginosa (P. aeruginosa). The minimum inhibitory concentration is 200 and 400 mu g mL(-1) for S. aureus and P. aeruginosa, respectively, and is achieved only after 3 h of incubation. Neither CS nor Na-CS exhibit antibacterial activity. The antibacterial activity is suggested to originate from electrostatic interactions between O-CS and the bacteria.
|
|
| 4. |
- Adolfsson, Karin H., et al.
(författare)
-
In Vivo Versus In Vitro Degradation of a 3D Printed Resorbable Device for Ligation of Vascular Tissue in Horses
- 2021
-
Ingår i: Macromolecular Bioscience. - : Wiley. - 1616-5187 .- 1616-5195. ; 21:10
-
Tidskriftsartikel (refereegranskat)abstract
- A resorbable 3D printed polydioxanone (PDO) device is manufactured to facilitate ligation of vascular tissue during surgery. The device must provide sufficient mechanical performance throughout the healing period. Therefore, degradation and mechanical performance of the device are investigated as a function of in vivo and in vitro aging. During aging the PDO device released cyclic and linear water-soluble products. In vivo aging resulted in higher relative number of linear oligomers in comparison to in vitro aging. A major loss of mechanical performance is observed after only 10 days in vivo and the Young’s modulus (E) and tensile strength at break (σb) decreased by 28% and 54%, respectively. This is in contrast to in vitro aging, where no loss of mechanical properties is observed during the same period. The in vivo aged devices exhibit clear holes in the matrices after 28 days, while apparent cracks are observed first after 140 days in vitro. These results highlight the sensitivity of the degradation process of resorbable devices with regards to the interactions of the device with the surrounding environment (tissues) and demonstrate the importance of in vivo testing as compliment to in vitro testing before clinical use of devices.
|
|
| 5. |
- Adolfsson, Karin H., et al.
(författare)
-
Microwave Assisted Hydrothermal Carbonization and Solid State Postmodification of Carbonized Polypropylene
- 2018
-
Ingår i: ACS Sustainable Chemistry and Engineering. - : AMER CHEMICAL SOC. - 2168-0485. ; 6:8, s. 11105-11114
-
Tidskriftsartikel (refereegranskat)abstract
- Functional carbon materials produced through a hydrothermal treatment of waste products have gained interest. Particularly, the method is considered more facile and green compared to conventional decomposition methods. Here, we demonstrated an upcycling of polypropylene (PP) waste to carbon materials by a microwave assisted hydro thermal treatment. The solid product obtained from the hydrothermal treatment was analyzed by multiple techniques to reveal the structure and the influence of processing conditions on PP degradation and hydrothermal carbonization. Chemical analyses showed the presence of carbonaceous material independent of acid amount (20 and 30 mL), temperature (210 and 250 degrees C), and time (20-80 min). A complete transformation of PP content to amorphous carbon required 60 min at 250 degrees C. The mass yield of the solid product decreased as a function of harsher processing conditions. At the same time, thermogravimetric analysis illustrated products with increasing thermal stability and a larger amount of remaining residue at 600 degrees C. The solid products consisted of irregular fragments and sheet-like structures. A solid state microwave process in air atmosphere was performed on a product with incomplete carbonization. The modification resulted in a decreased C/O ratio, and TGA analysis in nitrogen showed high thermal stability and degree of carbonization as indicated by the remaining residue of 86.4% at 600 degrees C. The new insights provided on the hydrothermal carbonization, and postmodification in air atmosphere, can catalyze effective handling of plastic waste by enabling transformation of low quality waste into functional carbon materials.
|
|
| 6. |
- Adolfsson, Karin H., et al.
(författare)
-
Oxidized Carbonized Cellulose-Coated Filters for Environmental Contaminant Adsorption and Detection
- 2020
-
Ingår i: Industrial & Engineering Chemistry Research. - : American Chemical Society (ACS). - 0888-5885 .- 1520-5045. ; 59:30, s. 13578-13587
-
Tidskriftsartikel (refereegranskat)abstract
- Cationized cellulose filters with coating of oxidized carbonized cellulose (OCC) were successfully fabricated. The OCC-coated filter was demonstrated as a combined surface for adsorption of environmental contaminants and their detection on the filter by surface-assisted desorption ionization-mass spectrometry (SALDI-MS). The cellulose filters were cationized by utilizing 3-chloro-2-hydroxypropyltrimethylammonium chloride (CHTAC) and sodium hydroxide. It was shown that the degree of substitution increased with the CHTAC feed. OCC, synthesized by hydrothermal carbonization of cellulose with subsequent oxidation and dialysis, was attached onto the cationized filters by electrostatic interactions. The filters adsorbed the model contaminant methylene blue (MB) from aqueous solution, and the MB could subsequently be detected on the filter surfaces by SALDI-MS as [M](+) adduct. The OCC coating further improved the relative peak intensity of [M](+) with little background interferences. This work indicates great potential for the OCC-coated filters as a combined surface for rapid monitoring of environmental contaminants.
|
|
| 7. |
- Adolfsson, Karin H., et al.
(författare)
-
Scavenging of DPPH by Persistent Free Radicals in Carbonized Particles
- 2023
-
Ingår i: Advanced Sustainable Systems. - : Wiley. - 2366-7486. ; 7:3
-
Tidskriftsartikel (refereegranskat)abstract
- Persistent free radicals (PFR) in carbonized particles may play a role in degradation of environmental compounds. The influence of PFR is evaluated in various carbonized particles on their radical scavenging efficiency upon the common radical indicator 2-2-diphenyl-1-picrylhydrazyl (DPPH). Carbonized particles are derived by hydrothermal carbonization of glucose (C-W) or glucose and urea (NC-W) and ionothermal carbonization of glucose and urea ionic liquid (IL) (NC-IL). The carbonized materials contain OH/COOH, C=C, and C-O functionalities. The addition of urea introduces NH/NH2 functionalities. The content of polar surface groups is lower in IL-processed NC-IL. The scavenging ability, measured as DPPH UV–vis absorption decline, increases with concentration and time for all particles, while the efficiency changes are in the order of C-W > NC-W > NC-IL. Electron paramagnetic resonance analysis reveals similar radical concentration in all carbonized materials studied. The difference in efficiency is, thus, not directly related to the PFR concentration but rather to the type of PFR, surface functionalities and/or scavenging mechanism. According to the g-values, radicals in these particles are carbon-centered. The minor variation in g-values suggests interactions between the radicals and their environmental functional groups. This provides insights into the influence of PFR in carbonized materials on their radical scavenging efficiency.
|
|
| 8. |
- Adolfsson, Karin H., et al.
(författare)
-
Valorization of cellulose and waste paper to graphene oxide quantum dots
- 2015
-
Ingår i: RSC Advances. - : Royal Society of Chemistry (RSC). - 2046-2069. ; 5:34, s. 26550-26558
-
Tidskriftsartikel (refereegranskat)abstract
- Biobased graphene oxide quantum dots (GOQD) were derived from cellulose via carbon nanospheres (CN) as intermediate products. Solid CN were synthesized from cellulose through microwave-assisted hydrothermal degradation of alpha-cellulose with H2SO4 as a catalyst at 160 degrees C. The obtained CN were further utilized for the synthesis of GOQD by a two-step reaction including 30 minutes of sonication followed by heating at 90 degrees C under O-rich acidic conditions (HNO3). This process broke down the 3D CN to 2D GOQD. The size of the synthesized GOQD was controlled by the heating time, reaching a dot diameter of 3.3 nm and 1.2 nm after 30 and 60 minutes of heating, respectively. The synthesis process and products were characterized by multiple analytical techniques including FTIR, TGA, SEM, TEM, XPS, XRD, BET, DLS and AFM. Interesting optical properties in aqueous solutions were demonstrated by UV/Vis and fluorescence spectroscopy. Finally we demonstrated that corresponding GOQD can be synthesized from waste paper. This production route thus uses renewable and cheap starting materials and relatively mild synthesis procedures leads to instant nanometric production of 2D dots. In addition it enables recycling of low quality waste to value-added products.
|
|
| 9. |
|
|
| 10. |
- Adolfsson, Karin H., et al.
(författare)
-
Zero-Dimensional and Highly Oxygenated Graphene Oxide for Multifunctional Poly(lactic acid) Bionanocomposites
- 2016
-
Ingår i: ACS Sustainable Chemistry and Engineering. - : American Chemical Society (ACS). - 2168-0485. ; 4:10, s. 5618-5631
-
Tidskriftsartikel (refereegranskat)abstract
- The unique strengths of 2D graphene oxide nanosheets (GONSs) in polymer composites are thwarted by nanosheet agglomeration due to strong intersheet attractions. Here, we reveal that shrinking the planar size to 0D graphene oxide quantum dots (GOQDs), together with the intercalation of rich oxygen functional groups, reduces filler aggregation and enhances interfacial interactions with the host polymer. With poly(lactic acid) (PLA) as a model matrix, atomic force microscopy colloidal probe measurements illustrated that a triple increase in adhesion force to PLA was achieved for GOQDs (234.8 nN) compared to GONSs (80.4 nN), accounting for the excellent exfoliation and dispersion of GOQDs in PLA, in contrast to the notable agglomeration of GONSs. Although present at trace amount (0.05 wt %), GOQDs made a significant contribution to nucleation activity, mechanical strength and ductility, and gas barrier properties of PLA, which contrasted the inferior efficacy of GONSs, accompanied by clear distinction in film transparency (91% and 50%, respectively). Moreover, the GOQDs with higher hydrophilicity accelerated the degradation of PLA by enhancing water erosion, while the GONSs with large sheet surfaces gave a higher hydrolytic resistance. Our findings provide conceptual insights into the importance of the dimensionality and surface chemistry of GO nanostructures in the promising field of bionanocomposites integrating high strength and multifunction (e.g., enhanced transparency, degradation and gas barrier).
|
|
