SwePub
Sök i SwePub databas

  Utökad sökning

Träfflista för sökning "WFRF:(Ahlbäck Jonny) "

Sökning: WFRF:(Ahlbäck Jonny)

  • Resultat 1-7 av 7
Sortera/gruppera träfflistan
   
NumreringReferensOmslagsbildHitta
1.
  • Al Dmour, Eshraq, et al. (författare)
  • Diffraction-limited storage-ring vacuum technology.
  • 2014
  • Ingår i: Journal of Synchrotron Radiation. - 1600-5775. ; 21:Pt 5, s. 878-883
  • Tidskriftsartikel (refereegranskat)abstract
    • Some of the characteristics of recent ultralow-emittance storage-ring designs and possibly future diffraction-limited storage rings are a compact lattice combined with small magnet apertures. Such requirements present a challenge for the design and performance of the vacuum system. The vacuum system should provide the required vacuum pressure for machine operation and be able to handle the heat load from synchrotron radiation. Small magnet apertures result in the conductance of the chamber being low, and lumped pumps are ineffective. One way to provide the required vacuum level is by distributed pumping, which can be realised by the use of a non-evaporable getter (NEG) coating of the chamber walls. It may not be possible to use crotch absorbers to absorb the heat from the synchrotron radiation because an antechamber is difficult to realise with such a compact lattice. To solve this, the chamber walls can work as distributed absorbers if they are made of a material with good thermal conductivity, and distributed cooling is used at the location where the synchrotron radiation hits the wall. The vacuum system of the 3 GeV storage ring of MAX IV is used as an example of possible solutions for vacuum technologies for diffraction-limited storage rings.
  •  
2.
  • Bocchetta, Carlo, et al. (författare)
  • Project Status of the Polish Synchrotron Radiation Facility Solaris
  • 2011
  • Ingår i: Proceedings of IPAC2011. - 9789290833666 ; , s. 3014-3016
  • Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
    • Abstract in Undetermined The Polish synchrotron radiation facility Solaris is being built at the Jagiellonian University in Krakow. The project is based on an identical copy of the 1.5 GeV storage ring being concurrently built for the MAX IV project in Lund, Sweden. A general description of the facility is given together with a status of activities. Unique features associated with Solaris are outlined, such as infrastructure, the injector and operational characteristics.
  •  
3.
  •  
4.
  • Eriksson, Mikael, et al. (författare)
  • The MAX IV Facility
  • 2013
  • Ingår i: 11th International Conference on Synchrotron Radiation Instrumentation (SRI 2012). - : IOP Publishing. - 1742-6588 .- 1742-6596. ; 425
  • Konferensbidrag (refereegranskat)abstract
    • The MAX IV synchrotron radiation facility is currently being constructed in Lund, Sweden. The accelerator park consists of a 3 GeV linac injector and 2 storage rings operated at 1.5 and 3 GeV respectively. The linac injector will also be used for the generation of short Xray pulses. Close to 30 straight sections will be available for IDs at the rings. The three machines mentioned above are described below with some emphasis on the effort to create a very small emittance in the 3 GeV ring. Some unconventional technical solutions imposed by the emittance minimisation are discussed.
  •  
5.
  • Eriksson, Mikael, et al. (författare)
  • The MAX IV Synchrotron Light Source
  • 2011
  • Ingår i: [Host publication title missing]. - 9789290833666 ; , s. 3026-3028
  • Konferensbidrag (refereegranskat)abstract
    • The MAX IV synchrotron radiation facility is currently being constructed in Lund, Sweden. It consists of a 3 GeV linac injector and 2 storage rings operated at 1.5 and 3 GeV respectively. The linac injector will also be used for the generation of short X-ray pulses. The three machines mentioned above are described with some emphasis on the effort to create a very small emittance in the 3 GeV ring. Some unconventional technical solutions will also be presented.
  •  
6.
  • Leemann, Simon, et al. (författare)
  • Status of the MAX IV Storage Rings
  • 2010
  • Ingår i: Proceedings of IPAC’10. - 9789290833529 ; , s. 2618-2620
  • Konferensbidrag (refereegranskat)abstract
    • In 2009 the MAX IV facility was granted funding by Swedish authorities. Construction of the facility will begin this summer and user operation is expected by 2015. MAX IV will consist of a 3.4 GeV linac as a driver for a short-pulse radiation facility (with planned upgrade to a seeded/cascaded FEL) as well as an injector for two storage rings at different energies serving user communities in separate spectral ranges. Thanks to a novel compact multibend-achromat design, the 3 GeV ring will deliver a 500 mA electron beam with a horizontal emittance below 0.3 nmrad to x-ray insertion devices located in 19 dispersion-free 5 m straight sections. When the 3 GeV ring goes into operation in 2015 it is expected to become the highest electron-brightness storage ring light source world-wide. The 1.5 GeV ring will serve as a replacement for both present-day MAX II and MAX III storage rings. Its below 6 nm rad horizontal emittance electron beam will be delivered to IR and UV insertion devices in twelve 3.5 m straight sections. We report on design progress for the two new storage rings of the MAX IV facility.
  •  
7.
  • Sjöström, Magnus, et al. (författare)
  • Orbit Feedback System for the MAX IV 3 GeV Storage Ring
  • 2011
  • Ingår i: [Host publication title missing]. - 9789290833666 ; , s. 499-501
  • Konferensbidrag (refereegranskat)abstract
    • The paper gives an overview of the planned orbit correc- tion system for the 3 GeV storage ring at the MAX IV lab- oratory, a light source facility currently under construction in Lund, Sweden[1, 2]. The ring will have a vertical beam size in the 1-4μm range in the insertion device (ID) straight sections depending on coupling[3], which places high re- quirements on the orbit stability. To meet this the ring will be equipped with 200 beam position monitors (BPMs) and two different sets of corrector magnets, which will be used by two separate orbit feedback loops; a slow orbit feedback (SOFB) loop to handle misalignments and drifts and a fast orbit feedback (FOFB) loop to reduce beam jitter. The pa- per also includes a brief description of the various engi- neering boundary conditions on the orbit feedback design for the MAX IV 3 GeV storage ring.
  •  
Skapa referenser, mejla, bekava och länka
  • Resultat 1-7 av 7

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

 
pil uppåt Stäng

Kopiera och spara länken för att återkomma till aktuell vy